在eclipse 配置了maven  编译项目时提示一下错误[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 0.093s
[INFO] Finished at: Wed Jan 19 10:36:06 CST 2011
[INFO] Final Memory: 1M/4M
[INFO] ------------------------------------------------------------------------
[ERROR] No goals have been specified for this build. You must specify a valid lifecycle phase or a goal in the format <plugin-prefix>:<goal> or <plugin-group-id>:<plugin-artifact-id>[:<plugin-version>]:<goal>. Available lifecycle phases are: validate, initialize, generate-sources, process-sources, generate-resources, process-resources, compile, process-classes, generate-test-sources, process-test-sources, generate-test-resources, process-test-resources, test-compile, process-test-classes, test, prepare-package, package, pre-integration-test, integration-test, post-integration-test, verify, install, deploy, pre-clean, clean, post-clean, pre-site, site, post-site, site-deploy. -> [Help 1]
org.apache.maven.lifecycle.NoGoalSpecifiedException: No goals have been specified for this build. You must specify a valid lifecycle phase or a goal in the format <plugin-prefix>:<goal> or <plugin-group-id>:<plugin-artifact-id>[:<plugin-version>]:<goal>. Available lifecycle phases are: validate, initialize, generate-sources, process-sources, generate-resources, process-resources, compile, process-classes, generate-test-sources, process-test-sources, generate-test-resources, process-test-resources, test-compile, process-test-classes, test, prepare-package, package, pre-integration-test, integration-test, post-integration-test, verify, install, deploy, pre-clean, clean, post-clean, pre-site, site, post-site, site-deploy.
at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:104)
at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:316)
at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:153)
at org.apache.maven.cli.MavenCli.execute(MavenCli.java:451)
at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:188)
at org.apache.maven.cli.MavenCli.main(MavenCli.java:134)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290)
at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230)
at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409)
at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352)
[ERROR] 
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR] 
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/NoGoalSpecifiedException查过教程由说是http://wenku.baidu.com/view/5934b80c844769eae009eded.html
本地仓库位置问题。说让改settings。xml文件。但具体怎么改还不太确定。希望谁有例子发一下。(我就写了一个简单的hello world 程序。谢谢现在有些乱。如果问题信息不详细我再补充。

解决方案 »

  1.   

    No goals have been specified for this build.你执行了啥命令?好像是 goal 错误试下: mvn clean test
      

  2.   

    maven不需要配置本地库地址 默认是在用户名下/.m2/repository下面的. 如果你环境变量和插件安装正确的话。写完pom.xml直接安装就行了。这个错误没遇到过。呵呵
      

  3.   

    clean    
    install
    compile
    integration-test
    netbeans-freeform:generate-netbeans-project
    package
    process-resources
    deploy
    process-sources
    site
    test
    eclipse:add-maven-repo
    test-compile
    eclipse:clean                                tomcat:deploy
    eclipse:eclipse                              tomcat:run
    generate-resources                           tomcat:run-war
    generate-sources                             validate
    idea:idea                                    verify
      

  4.   

    You must specify a valid lifecycle phase or a goal in the format <plugin-prefix>:<goal> or <plugin-group-id>:<plugin-artifact-id>[:<plugin-version>]:<goal>. Available lifecycle phases are: validate, initialize, generate-sources, process-sources, generate-resources, process-resources, compile, process-classes, generate-test-sources, process-test-sources, generate-test-resources, process-test-resources, test-compile, process-test-classes, test, prepare-package, package, pre-integration-test, integration-test, post-integration-test, verify, install, deploy, pre-clean, clean, post-clean, pre-site, site, post-site, site-deploy.
      

  5.   


    mvn clean test测试成功了,但还不知道是为什么maven 的插件还没有安装,在网上找到也有类似说明那个,但是配置方法还不确定
      

  6.   

    $HOME/.m2/settings.xml
    <?xml version="1.0" encoding="UTF-8"?><!--
    Licensed to the Apache Software Foundation (ASF) under one
    or more contributor license agreements.  See the NOTICE file
    distributed with this work for additional information
    regarding copyright ownership. The ASF licenses this file
    to you under the Apache License, Version 2.0 (the
    "License"); you may not use this file except in compliance
    with the License.  You may obtain a copy of the License athttp://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing,
    software distributed under the License is distributed on an
    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, either express or implied.  See the License for the
    specific language governing permissions and limitations
    under the License.
    --><!--
    | This is the configuration file for Maven. It can be specified at two levels:
    |
    |  1. User Level. This settings.xml file provides configuration for a single user,
    |   and is normally provided in ${user.home}/.m2/settings.xml.
    |
    |   NOTE: This location can be overridden with the CLI option:
    |
    |   -s /path/to/user/settings.xml
    |
    |  2. Global Level. This settings.xml file provides configuration for all Maven
    |   users on a machine (assuming they're all using the same Maven
    |   installation). It's normally provided in
    |   ${maven.home}/conf/settings.xml.
    |
    |   NOTE: This location can be overridden with the CLI option:
    |
    |   -gs /path/to/global/settings.xml
    |
    | The sections in this sample file are intended to give you a running start at
    | getting the most out of your Maven installation. Where appropriate, the default
    | values (values used when the setting is not specified) are provided.
    |
    |-->
    <settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
      <!-- localRepository
       | The path to the local repository maven will use to store artifacts.
       |
       | Default: ~/.m2/repository
       <localRepository>/path/to/local/repo</localRepository>
      -->  <!-- interactiveMode
       | This will determine whether maven prompts you when it needs input. If set to false,
       | maven will use a sensible default value, perhaps based on some other setting, for
       | the parameter in question.
       |
       | Default: true
       <interactiveMode>true</interactiveMode>
      -->  <!-- offline
       | Determines whether maven should attempt to connect to the network when executing a build.
       | This will have an effect on artifact downloads, artifact deployment, and others.
       |
       | Default: false
       <offline>false</offline>
      -->  <!-- pluginGroups
       | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
       | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
       | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
       |-->
      <pluginGroups>
    <!-- pluginGroup
     | Specifies a further group identifier to use for plugin lookup.
     <pluginGroup>com.your.plugins</pluginGroup>
    -->
      </pluginGroups>  <!-- proxies
       | This is a list of proxies which can be used on this machine to connect to the network.
       | Unless otherwise specified (by system property or command-line switch), the first proxy
       | specification in this list ed as active will be used.
       |-->
      <proxies>
    <!-- proxy
     | Specification for one proxy, to be used in connecting to the network.
     |
     <proxy>
     <id>optional</id>
     <active>true</active>
     <protocol>http</protocol>
     <username>proxyuser</username>
     <password>proxypass</password>
     <host>proxy.host.net</host>
     <port>80</port>
     <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
     </proxy>
    -->
      </proxies>  <!-- servers
       | This is a list of authentication profiles, keyed by the server-id used within the system.
       | Authentication profiles can be used whenever maven must make a connection to a remote server.
       |-->
      <servers>
    <!-- server
     | Specifies the authentication information to use when connecting to a particular server, identified by
     | a unique name within the system (referred to by the 'id' attribute below).
     |
     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
     |  used together.
     |
     <server>
     <id>deploymentRepo</id>
     <username>repouser</username>
     <password>repopwd</password>
     </server>
    --> <!-- Another sample, using keys to authenticate.
     <server>
     <id>siteServer</id>
     <privateKey>/path/to/private/key</privateKey>
     <passphrase>optional; leave empty if not used.</passphrase>
     </server>
    -->
      </servers>  <!-- mirrors
       | This is a list of mirrors to be used in downloading artifacts from remote repositories.
       |
       | It works like this: a POM may declare a repository to use in resolving certain artifacts.
       | However, this repository may have problems with heavy traffic at times, so people have mirrored
       | it to several places.
       |
       | That repository definition will have a unique id, so we can create a mirror reference for that
       | repository, to be used as an alternate download site. The mirror site will be the preferred
       | server for that repository.
       |-->
      <mirrors>
    <mirror>
      <id>uk</id>
      <mirrorOf>central</mirrorOf>
      <url>http://uk.maven.org/maven2/</url>
    </mirror>
      </mirrors>  <!-- profiles
       | This is a list of profiles which can be activated in a variety of ways, and which can modify
       | the build process. Profiles provided in the settings.xml are intended to provide local machine-
       | specific paths and repository locations which allow the build to work in the local environment.
       |
       | For example, if you have an integration testing plugin - like cactus - that needs to know where
       | your Tomcat instance is installed, you can provide a variable here such that the variable is
       | dereferenced during the build process to configure the cactus plugin.
       |
       | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
       | section of this document (settings.xml) - will be discussed later. Another way essentially
       | relies on the detection of a system property, either matching a particular value for the property,
       | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
       | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
       | Finally, the list of active profiles can be specified directly from the command line.
       |
       | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
       |    repositories, plugin repositories, and free-form properties to be used as configuration
       |    variables for plugins in the POM.
       |
       |-->
      <profiles>
    <profile>
      <id>jboss-public-repository</id>
      <repositories>
    <repository>
      <id>jboss-public-repository-group</id>
      <name>JBoss Public Maven Repository Group</name>
      <url>https://repository.jboss.org/nexus/content/groups/public-jboss/</url>
      <layout>default</layout>
      <releases>
    <enabled>true</enabled>
    <updatePolicy>never</updatePolicy>
      </releases>
      <snapshots>
    <enabled>true</enabled>
    <updatePolicy>never</updatePolicy>
      </snapshots>
    </repository>
      </repositories>
      <pluginRepositories>
    <pluginRepository>
      <id>jboss-public-repository-group</id>
      <name>JBoss Public Maven Repository Group</name>
      <url>https://repository.jboss.org/nexus/content/groups/public-jboss/</url>
      <layout>default</layout>
      <releases>
    <enabled>true</enabled>
    <updatePolicy>never</updatePolicy>
      </releases>
      <snapshots>
    <enabled>true</enabled>
    <updatePolicy>never</updatePolicy>
      </snapshots>
    </pluginRepository>
      </pluginRepositories>
    </profile>
      </profiles>
      <activeProfiles>
    <activeProfile>jboss-public-repository</activeProfile>
      </activeProfiles>
    </settings>
      

  7.   

    肯定要先装一个MAVEN插件,然后安装一个本地MAVEN客户端,最后有一个MAVEN服务器,再配置一下setting.xml配置文件,就可以正确的从MAVEN服务器下载依赖和编译项目了.
      

  8.   


    build.plugins.plugin.version' for org.apache.maven.plugins:maven-resources-plugin is missing
    现在提示maven-resources-plugin  这个插件没找到,项目构建不成功。     <plugin>  
           <groupId>org.apache.maven.plugins</groupId>  
           <artifactId>maven-resources-plugin</artifactId>  
                <configuration>  
                     <encoding>UTF-8</encoding>  
                 </configuration>  
           </plugin>  这是POM里添加的代码。
      

  9.   

     执行mvn clean test 命令时提示有一个错误