利用api exitWindowsex()
在click里写上就ok了;
exitWindowsex(EWX_SHUTDOWN,0)
具体的介绍如下:
ExitWindowsEx function either logs off, shuts down, or shuts down and restarts the system. BOOL ExitWindowsEx( UINT uFlags, // shutdown operation
DWORD dwReserved // reserved
);
ParametersuFlagsSpecifies the type of shutdown. This parameter must be some combination of the following values: Value Meaning
EWX_FORCE Forces processes to terminate. When this flag is set, Windows does not send the messages WM_QUERYENDSESSION and WM_ENDSESSION to the applications currently running in the system. This can cause the applications to lose data. Therefore, you should only use this flag in an emergency.
EWX_LOGOFF Shuts down all processes running in the security context of the process that called the ExitWindowsEx function. Then it logs the user off.
EWX_POWEROFF Shuts down the system and turns off the power. The system must support the power-off feature.Windows NT: The calling process must have the SE_SHUTDOWN_NAME privilege. For more information, see the following Res section. Windows 95: Security privileges are not supported or required.
EWX_REBOOT Shuts down the system and then restarts the system. Windows NT: The calling process must have the SE_SHUTDOWN_NAME privilege. For more information, see the following Res section. Windows 95: Security privileges are not supported or required.
EWX_SHUTDOWN Shuts down the system to a point at which it is safe to turn off the power. All file buffers have been flushed to disk, and all running processes have stopped. Windows NT: The calling process must have the SE_SHUTDOWN_NAME privilege. For more information, see the following Res section. Windows 95: Security privileges are not supported or required.
dwReservedReserved; this parameter is ignored. Return ValuesIf the function succeeds, the return value is nonzero.
If the function fails, the return value is zero. To get extended error information, call GetLastError. ResThe ExitWindowsEx function returns as soon as it has initiated the shutdown. The shutdown or logoff then proceeds asynchronously.
During a shutdown or log-off operation, applications that are shut down are allowed a specific amount of time to respond to the shutdown request. If the time expires, Windows displays a dialog box that allows the user to forcibly shut down the application, to retry the shutdown, or to cancel the shutdown request. If the EWX_FORCE value is specified, Windows always forces applications to close and does not display the dialog box. The ExitWindowsEx function sends a separate notification message, CTRL_SHUTDOWN_EVENT or CTRL_LOGOFF_EVENT as the situation warrants, to console processes. A console process routes these messages to its HandlerRoutine functions, which are added and removed by calls to the SetConsoleCtrlHandler function. ExitWindowsEx sends these notification messages asynchronously; thus, an application cannot assume that the console notification messages have been handled when a call to ExitWindowsEx returns. Windows NT: To shut down or restart the system, the calling process must use the AdjustTokenPrivileges function to enable the SE_SHUTDOWN_NAME privilege. For more information about security privileges, see Privileges.
Windows 95: Security privileges are not supported or required.
在click里写上就ok了;
exitWindowsex(EWX_SHUTDOWN,0)
具体的介绍如下:
ExitWindowsEx function either logs off, shuts down, or shuts down and restarts the system. BOOL ExitWindowsEx( UINT uFlags, // shutdown operation
DWORD dwReserved // reserved
);
ParametersuFlagsSpecifies the type of shutdown. This parameter must be some combination of the following values: Value Meaning
EWX_FORCE Forces processes to terminate. When this flag is set, Windows does not send the messages WM_QUERYENDSESSION and WM_ENDSESSION to the applications currently running in the system. This can cause the applications to lose data. Therefore, you should only use this flag in an emergency.
EWX_LOGOFF Shuts down all processes running in the security context of the process that called the ExitWindowsEx function. Then it logs the user off.
EWX_POWEROFF Shuts down the system and turns off the power. The system must support the power-off feature.Windows NT: The calling process must have the SE_SHUTDOWN_NAME privilege. For more information, see the following Res section. Windows 95: Security privileges are not supported or required.
EWX_REBOOT Shuts down the system and then restarts the system. Windows NT: The calling process must have the SE_SHUTDOWN_NAME privilege. For more information, see the following Res section. Windows 95: Security privileges are not supported or required.
EWX_SHUTDOWN Shuts down the system to a point at which it is safe to turn off the power. All file buffers have been flushed to disk, and all running processes have stopped. Windows NT: The calling process must have the SE_SHUTDOWN_NAME privilege. For more information, see the following Res section. Windows 95: Security privileges are not supported or required.
dwReservedReserved; this parameter is ignored. Return ValuesIf the function succeeds, the return value is nonzero.
If the function fails, the return value is zero. To get extended error information, call GetLastError. ResThe ExitWindowsEx function returns as soon as it has initiated the shutdown. The shutdown or logoff then proceeds asynchronously.
During a shutdown or log-off operation, applications that are shut down are allowed a specific amount of time to respond to the shutdown request. If the time expires, Windows displays a dialog box that allows the user to forcibly shut down the application, to retry the shutdown, or to cancel the shutdown request. If the EWX_FORCE value is specified, Windows always forces applications to close and does not display the dialog box. The ExitWindowsEx function sends a separate notification message, CTRL_SHUTDOWN_EVENT or CTRL_LOGOFF_EVENT as the situation warrants, to console processes. A console process routes these messages to its HandlerRoutine functions, which are added and removed by calls to the SetConsoleCtrlHandler function. ExitWindowsEx sends these notification messages asynchronously; thus, an application cannot assume that the console notification messages have been handled when a call to ExitWindowsEx returns. Windows NT: To shut down or restart the system, the calling process must use the AdjustTokenPrivileges function to enable the SE_SHUTDOWN_NAME privilege. For more information about security privileges, see Privileges.
Windows 95: Security privileges are not supported or required.
解决方案 »
- delphi怎么创建二次开发呢?
- PrintDbGridEh控件的打印预览有的时候是中文有的时候是英文,怎么回事啊
- 奇怪的DCOM代码转COM+出现的异常,"DLLHOST.exe 地址异常错误",请高手作答!
- 有对条码枪编程经验的请进,紧急求助
- 有关自定义消息响应过程
- 刚接触Delphi,想知道Delphi7里面重载方法怎么个弄法
- dephi 中有无这样的属性功能?????
- 请问如何打印dbgrid
- Form上有许多矩形区域,要使鼠标移到这些区域内时就beep,应该怎么做?
- 关于资源文件的操作
- DBlookupcombobox等的问题?
- 我想编一个游戏,可是我什么也不会!谁能给我做一个?我的分数全都给他!!
Declare Function ExitWindowsEx Lib "user32" Alias "ExitWindowsEx" (ByVal uFlags As Long, ByVal dwReserved As Long) As Long
说明
退出windows,并用特定的选项重新启动
返回值
Long,非零表示成功,零表示失败。会设置GetLastError
参数表
参数 类型及说明
uFlags Long,指定下述一个或多个标志(用OR运算符合并到一起)
EWX_FORCE 强迫中止没有响应的进程
EWX_LOGOFF 中止进程,然后注销
EWX_SHUTDOWN 关掉系统电源(如果可能的话,ATX电源就可以)
EWX_REBOOT 重新引导系统
EWX_SHUTDOWN 关闭系统
dwReserved Long,保留,设为零
注解
这个函数调用后会立刻返回,系统关闭过程是在后台进行的。注意先中止自己的应用程序,使关闭过程更显平顺。当然,您的进程必须有足够的优先权,否则也不能执行这种操作
exitwindowsex(ewx_reboot+ewx_force,0);
这样最好了!!!!!谢谢了,给分吧
你还写的真全阿!
ExitWindowsEx(EWX_REBOOT,0);
WinExec('Rundll.exe User.exe,ExitWindowsExec', SW_NORMAL);