Select Identity(....) ...Into #temp.... Order by ....select top N ... from #temp呢?
解决方案 »
- 网络正常,但检索不到数据
- SQL 月份相加问题
- [请问]在Sql Server2000中,可以设置让Sql Server每天的某个固定时间自动检查某个表中的日期,然后符合某种条件,就执行某个命令吗?
- 谁还记得那个关于SQL Server 对象命名的链接?(好像是邹建或是大力发起的帖)
- 挑战数据库管理方面高手的难题,为什么建设据库维护计划时,生产服务器已经根据调度生成日志备份,但是生产服务器却没有把日志文件传到备
- distinct消除重复数据
- 这是为什么呢?
- 请教SQLSERVER数据库文件达到20多G原因
- 员工照片(BLOB型)单独存到另一个表好,还是与员工数据存到一个表好?
- 这样的2个表应该怎么操作 60分全部献上了
- txlicenhe(马可)
- VB的select case语句替换成SQL Server的简单case函数,怎么写?
对于表中主键或标识列的情况,直接从原表取数查询,其它情况使用临时表的方法
如果视图或查询结果中有主键,不推荐此方法
如果使用查询语句,而且查询语句使用了order by,则查询语句必须包含top 语句--邹建 2003.09--*//*--调用示例
exec p_show '地区资料' exec p_show 'select top 100 percent * from 地区资料 order by 地区名称',5,3,'地区编号,地区名称,助记码'
--*/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[p_show]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[p_show]
GOCREATE Proc p_show
@QueryStr nvarchar(4000), --表名、视图名、查询语句
@PageSize int=10, --每页的大小(行数)
@PageCurrent int=1, --要显示的页
@FdShow nvarchar (4000)='', --要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段
@FdOrder nvarchar (1000)='' --排序字段列表
as
declare @FdName nvarchar(250) --表中的主键或表、临时表中的标识列名
,@Id1 varchar(20),@Id2 varchar(20) --开始和结束的记录号
,@Obj_ID int --对象ID
--表中有复合主键的处理
declare @strfd nvarchar(2000) --复合主键列表
,@strjoin nvarchar(4000) --连接字段
,@strwhere nvarchar(2000) --查询条件
select @Obj_ID=object_id(@QueryStr)
,@FdShow=case isnull(@FdShow,'') when '' then ' *' else ' '+@FdShow end
,@FdOrder=case isnull(@FdOrder,'') when '' then '' else ' order by '+@FdOrder end
,@QueryStr=case when @Obj_ID is not null then ' '+@QueryStr else ' ('+@QueryStr+') a' end--如果显示第一页,可以直接用top来完成
if @PageCurrent=1
begin
select @Id1=cast(@PageSize as varchar(20))
exec('select top '+@Id1+@FdShow+' from '+@QueryStr+@FdOrder)
return
end--如果是表,则检查表中是否有标识更或主键
if @Obj_ID is not null and objectproperty(@Obj_ID,'IsTable')=1
begin
select @Id1=cast(@PageSize as varchar(20))
,@Id2=cast((@PageCurrent-1)*@PageSize as varchar(20)) select @FdName=name from syscolumns where id=@Obj_ID and status=0x80
if @@rowcount=0 --如果表中无标识列,则检查表中是否有主键
begin
if not exists(select 1 from sysobjects where parent_obj=@Obj_ID and xtype='PK')
goto lbusetemp --如果表中无主键,则用临时表处理 select @FdName=name from syscolumns where id=@Obj_ID and colid in(
select colid from sysindexkeys where @Obj_ID=id and indid in(
select indid from sysindexes where @Obj_ID=id and name in(
select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID
)))
if @@rowcount>1 --检查表中的主键是否为复合主键
begin
select @strfd='',@strjoin='',@strwhere=''
select @strfd=@strfd+',['+name+']'
,@strjoin=@strjoin+' and a.['+name+']=b.['+name+']'
,@strwhere=@strwhere+' and b.['+name+'] is null'
from syscolumns where id=@Obj_ID and colid in(
select colid from sysindexkeys where @Obj_ID=id and indid in(
select indid from sysindexes where @Obj_ID=id and name in(
select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID
)))
select @strfd=substring(@strfd,2,2000)
,@strjoin=substring(@strjoin,5,4000)
,@strwhere=substring(@strwhere,5,4000)
goto lbusepk
end
end
end
else
goto lbusetemp/*--使用标识列或主键为单一字段的处理方法--*/
lbuseidentity:
exec('select top '+@Id1+@FdShow+' from '+@QueryStr
+' where '+@FdName+' not in(select top '
+@Id2+' '+@FdName+' from '+@QueryStr+@FdOrder
+')'+@FdOrder
)
return/*--表中有复合主键的处理方法--*/
lbusepk:
exec('select '+@FdShow+' from(select top '+@Id1+' a.* from
(select top 100 percent * from '+@QueryStr+@FdOrder+') a
left join (select top '+@Id2+' '+@strfd+'
from '+@QueryStr+@FdOrder+') b on '+@strjoin+'
where '+@strwhere+') a'
)
return/*--用临时表处理的方法--*/
lbusetemp:
select @FdName='[ID_'+cast(newid() as varchar(40))+']'
,@Id1=cast(@PageSize*(@PageCurrent-1) as varchar(20))
,@Id2=cast(@PageSize*@PageCurrent-1 as varchar(20))exec('select '+@FdName+'=identity(int,0,1),'+@FdShow+'
into #tb from'+@QueryStr+@FdOrder+'
select '+@FdShow+' from #tb where '+@FdName+' between '
+@Id1+' and '+@Id2
)GO
不用top n ,把你要分页显示的数据一次性放到#temp表里,然后
从#temp表里取得时候在使用top n 或使用between
如:
declare @n int
set @n=1--你每次可以通过给变量@n赋值,来得到纪录。
select top 20 * from #temp where id<=20*@n order by id --1倒20记录
select top 0 * into #t from tableinsert #t select * from table where .... order by .....