先感谢上面2位的回复 我php.ini的配置 已经把所有的extension=XXXXX 的选项//都去掉! 他还是不行!下面是我的配置 由于太长 分段发上来!麻烦帮忙看看 谢谢!!!! [PHP];;;;;;;;;;; ; WARNING ; ;;;;;;;;;;; ; This is the default settings file for new PHP installations. ; By default, PHP installs itself with a configuration suitable for ; development purposes, and *NOT* for production purposes. ; For several security-oriented considerations that should be taken ; before going online with your site, please consult php.ini-recommended ; and http://php.net/manual/en/security.php. ;;;;;;;;;;;;;;;;;;; ; About php.ini ; ;;;;;;;;;;;;;;;;;;; ; This file controls many aspects of PHP's behavior. In order for PHP to ; read it, it must be named 'php.ini'. PHP looks for it in the current ; working directory, in the path designated by the environment variable ; PHPRC, and in the path that was defined in compile time (in that order). ; Under Windows, the compile-time path is the Windows directory. The ; path in which the php.ini file is looked for can be overridden using ; the -c argument in command line mode. ; ; The syntax of the file is extremely simple. Whitespace and Lines ; beginning with a semicolon are silently ignored (as you probably guessed). ; Section headers (e.g. [Foo]) are also silently ignored, even though ; they might mean something in the future. ; ; Directives are specified using the following syntax: ; directive = value ; Directive names are *case sensitive* - foo=bar is different from FOO=bar. ; ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo"). ; ; Expressions in the INI file are limited to bitwise operators and parentheses: ; | bitwise OR ; & bitwise AND ; ~ bitwise NOT ; ! boolean NOT ; ; Boolean flags can be turned on using the values 1, On, True or Yes. ; They can be turned off using the values 0, Off, False or No. ; ; An empty string can be denoted by simply not writing anything after the equal ; sign, or by using the None keyword: ; ; foo = ; sets foo to an empty string ; foo = none ; sets foo to an empty string ; foo = "none" ; sets foo to the string 'none' ; ; If you use constants in your value, and these constants belong to a ; dynamically loaded extension (either a PHP extension or a Zend extension), ; you may only use these constants *after* the line that loads the extension. ; ; ;;;;;;;;;;;;;;;;;;; ; About this file ; ;;;;;;;;;;;;;;;;;;; ; All the values in the php.ini-dist file correspond to the builtin ; defaults (that is, if no php.ini is used, or if you delete these lines, ; the builtin defaults will be identical). ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;;; Enable the PHP scripting language engine under Apache. engine = On; Enable compatibility mode with Zend Engine 1 (PHP 4.x) zend.ze1_compatibility_mode = Off; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized. ; NOTE: Using short tags should be avoided when developing applications or ; libraries that are meant for redistribution, or deployment on PHP ; servers which are not under your control, because short tags may not ; be supported on the target server. For portable, redistributable code, ; be sure not to use short tags. short_open_tag = On; Allow ASP-style <% %> tags. asp_tags = Off; The number of significant digits displayed in floating point numbers. precision = 12; Enforce year 2000 compliance (will cause problems with non-compliant browsers) y2k_compliance = On; Output buffering allows you to send header lines (including cookies) even ; after you send body content, at the price of slowing PHP's output layer a ; bit. You can enable output buffering during runtime by calling the output ; buffering functions. You can also enable output buffering for all files by ; setting this directive to On. If you wish to limit the size of the buffer ; to a certain size - you can use a maximum number of bytes instead of 'On', as ; a value for this directive (e.g., output_buffering=4096). output_buffering = Off; You can redirect all of the output of your scripts to a function. For ; example, if you set output_handler to "mb_output_handler", character ; encoding will be transparently converted to the specified encoding. ; Setting any output handler automatically turns on output buffering. ; Note: People who wrote portable scripts should not depend on this ini ; directive. Instead, explicitly set the output handler using ob_start(). ; Using this ini directive may cause problems unless you know what script ; is doing. ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" ; and you cannot use both "ob_gzhandler" and "zlib.output_compression". ; Note: output_handler must be empty if this is set 'On' !!!! ; Instead you must use zlib.output_handler. ;output_handler =; Transparent output compression using the zlib library ; Valid values for this option are 'off', 'on', or a specific buffer size ; to be used for compression (default is 4KB) ; Note: Resulting chunk size may vary due to nature of compression. PHP ; outputs chunks that are few hundreds bytes each as a result of ; compression. If you prefer a larger chunk size for better ; performance, enable output_buffering in addition. ; Note: You need to use zlib.output_handler instead of the standard ; output_handler, or otherwise the output will be corrupted. zlib.output_compression = Off ;zlib.output_compression_level = -1; You cannot specify additional output handlers if zlib.output_compression ; is activated here. This setting does the same as output_handler but in ; a different order. ;zlib.output_handler =; Implicit flush tells PHP to tell the output layer to flush itself ; automatically after every output block. This is equivalent to calling the ; PHP function flush() after each and every call to print() or echo() and each ; and every HTML block. Turning this option on has serious performance ; implications and is generally recommended for debugging purposes only. implicit_flush = Off; The unserialize callback function will be called (with the undefined class' ; name as parameter), if the unserializer finds an undefined class ; which should be instantiated. ; A warning appears if the specified function is not defined, or if the ; function doesn't include/implement the missing class. ; So only set this entry, if you really want to implement such a ; callback-function. unserialize_callback_func=; When floats & doubles are serialized store serialize_precision significant ; digits after the floating point. The default value ensures that when floats ; are decoded with unserialize, the data will remain the same. serialize_precision = 100; Whether to enable the ability to force arguments to be passed by reference ; at function call time. This method is deprecated and is likely to be ; unsupported in future versions of PHP/Zend. The encouraged method of ; specifying which arguments should be passed by reference is in the function ; declaration. You're encouraged to try and turn this option Off and make ; sure your scripts work properly with it in order to ensure they will work ; with future versions of the language (you will receive a warning each time ; you use this feature, and the argument will be passed by value instead of by ; reference). allow_call_time_pass_reference = On
先感谢上面2位的回复 我php.ini的配置 已经把所有的extension=XXXXX 的选项//都去掉! 他还是不行!下面是我的配置 由于太长 分段发上来!麻烦帮忙看看 谢谢!!!! [PHP];;;;;;;;;;; ; WARNING ; ;;;;;;;;;;; ; This is the default settings file for new PHP installations. ; By default, PHP installs itself with a configuration suitable for ; development purposes, and *NOT* for production purposes. ; For several security-oriented considerations that should be taken ; before going online with your site, please consult php.ini-recommended ; and http://php.net/manual/en/security.php. ;;;;;;;;;;;;;;;;;;; ; About php.ini ; ;;;;;;;;;;;;;;;;;;; ; This file controls many aspects of PHP's behavior. In order for PHP to ; read it, it must be named 'php.ini'. PHP looks for it in the current ; working directory, in the path designated by the environment variable ; PHPRC, and in the path that was defined in compile time (in that order). ; Under Windows, the compile-time path is the Windows directory. The ; path in which the php.ini file is looked for can be overridden using ; the -c argument in command line mode. ; ; The syntax of the file is extremely simple. Whitespace and Lines ; beginning with a semicolon are silently ignored (as you probably guessed). ; Section headers (e.g. [Foo]) are also silently ignored, even though ; they might mean something in the future. ; ; Directives are specified using the following syntax: ; directive = value ; Directive names are *case sensitive* - foo=bar is different from FOO=bar. ; ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo"). ; ; Expressions in the INI file are limited to bitwise operators and parentheses: ; | bitwise OR ; & bitwise AND ; ~ bitwise NOT ; ! boolean NOT ; ; Boolean flags can be turned on using the values 1, On, True or Yes. ; They can be turned off using the values 0, Off, False or No. ; ; An empty string can be denoted by simply not writing anything after the equal ; sign, or by using the None keyword: ; ; foo = ; sets foo to an empty string ; foo = none ; sets foo to an empty string ; foo = "none" ; sets foo to the string 'none' ; ; If you use constants in your value, and these constants belong to a ; dynamically loaded extension (either a PHP extension or a Zend extension), ; you may only use these constants *after* the line that loads the extension. ; ; ;;;;;;;;;;;;;;;;;;; ; About this file ; ;;;;;;;;;;;;;;;;;;; ; All the values in the php.ini-dist file correspond to the builtin ; defaults (that is, if no php.ini is used, or if you delete these lines, ; the builtin defaults will be identical). ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;;; Enable the PHP scripting language engine under Apache. engine = On; Enable compatibility mode with Zend Engine 1 (PHP 4.x) zend.ze1_compatibility_mode = Off; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized. ; NOTE: Using short tags should be avoided when developing applications or ; libraries that are meant for redistribution, or deployment on PHP ; servers which are not under your control, because short tags may not ; be supported on the target server. For portable, redistributable code, ; be sure not to use short tags. short_open_tag = On; Allow ASP-style <% %> tags. asp_tags = Off; The number of significant digits displayed in floating point numbers. precision = 12; Enforce year 2000 compliance (will cause problems with non-compliant browsers) y2k_compliance = On; Output buffering allows you to send header lines (including cookies) even ; after you send body content, at the price of slowing PHP's output layer a ; bit. You can enable output buffering during runtime by calling the output ; buffering functions. You can also enable output buffering for all files by ; setting this directive to On. If you wish to limit the size of the buffer ; to a certain size - you can use a maximum number of bytes instead of 'On', as ; a value for this directive (e.g., output_buffering=4096). output_buffering = Off; You can redirect all of the output of your scripts to a function. For ; example, if you set output_handler to "mb_output_handler", character ; encoding will be transparently converted to the specified encoding. ; Setting any output handler automatically turns on output buffering. ; Note: People who wrote portable scripts should not depend on this ini ; directive. Instead, explicitly set the output handler using ob_start(). ; Using this ini directive may cause problems unless you know what script ; is doing. ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" ; and you cannot use both "ob_gzhandler" and "zlib.output_compression". ; Note: output_handler must be empty if this is set 'On' !!!! ; Instead you must use zlib.output_handler. ;output_handler =; Transparent output compression using the zlib library ; Valid values for this option are 'off', 'on', or a specific buffer size ; to be used for compression (default is 4KB) ; Note: Resulting chunk size may vary due to nature of compression. PHP ; outputs chunks that are few hundreds bytes each as a result of ; compression. If you prefer a larger chunk size for better ; performance, enable output_buffering in addition. ; Note: You need to use zlib.output_handler instead of the standard ; output_handler, or otherwise the output will be corrupted. zlib.output_compression = Off ;zlib.output_compression_level = -1; You cannot specify additional output handlers if zlib.output_compression ; is activated here. This setting does the same as output_handler but in ; a different order. ;zlib.output_handler =; Implicit flush tells PHP to tell the output layer to flush itself ; automatically after every output block. This is equivalent to calling the ; PHP function flush() after each and every call to print() or echo() and each ; and every HTML block. Turning this option on has serious performance ; implications and is generally recommended for debugging purposes only. implicit_flush = Off; The unserialize callback function will be called (with the undefined class' ; name as parameter), if the unserializer finds an undefined class ; which should be instantiated. ; A warning appears if the specified function is not defined, or if the ; function doesn't include/implement the missing class. ; So only set this entry, if you really want to implement such a ; callback-function. unserialize_callback_func=; When floats & doubles are serialized store serialize_precision significant ; digits after the floating point. The default value ensures that when floats ; are decoded with unserialize, the data will remain the same. serialize_precision = 100; Whether to enable the ability to force arguments to be passed by reference ; at function call time. This method is deprecated and is likely to be ; unsupported in future versions of PHP/Zend. The encouraged method of ; specifying which arguments should be passed by reference is in the function ; declaration. You're encouraged to try and turn this option Off and make ; sure your scripts work properly with it in order to ensure they will work ; with future versions of the language (you will receive a warning each time ; you use this feature, and the argument will be passed by value instead of by ; reference). allow_call_time_pass_reference = On
晕 4楼是我贴重了 实在对不起!!! ; ; Safe Mode ; safe_mode = Off; By default, Safe Mode does a UID compare check when ; opening files. If you want to relax this to a GID compare, ; then turn on safe_mode_gid. safe_mode_gid = Off; When safe_mode is on, UID/GID checks are bypassed when ; including files from this directory and its subdirectories. ; (directory must also be in include_path or full path must ; be used when including) safe_mode_include_dir =; When safe_mode is on, only executables located in the safe_mode_exec_dir ; will be allowed to be executed via the exec family of functions. safe_mode_exec_dir =; Setting certain environment variables may be a potential security breach. ; This directive contains a comma-delimited list of prefixes. In Safe Mode, ; the user may only alter environment variables whose names begin with the ; prefixes supplied here. By default, users will only be able to set ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). ; ; Note: If this directive is empty, PHP will let the user modify ANY ; environment variable! safe_mode_allowed_env_vars = PHP_; This directive contains a comma-delimited list of environment variables that ; the end user won't be able to change using putenv(). These variables will be ; protected even if safe_mode_allowed_env_vars is set to allow to change them. safe_mode_protected_env_vars = LD_LIBRARY_PATH; open_basedir, if set, limits all file operations to the defined directory ; and below. This directive makes most sense if used in a per-directory ; or per-virtualhost web server configuration file. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ;open_basedir =; This directive allows you to disable certain functions for security reasons. ; It receives a comma-delimited list of function names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. disable_functions =; This directive allows you to disable certain classes for security reasons. ; It receives a comma-delimited list of class names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. disable_classes =; Colors for Syntax Highlighting mode. Anything that's acceptable in ; <span style="color: ???????"> would work. ;highlight.string = #DD0000 ;highlight.comment = #FF9900 ;highlight.keyword = #007700 ;highlight.bg = #FFFFFF ;highlight.default = #0000BB ;highlight.html = #000000; If enabled, the request will be allowed to complete even if the user aborts ; the request. Consider enabling it if executing long request, which may end up ; being interrupted by the user or a browser timing out. ; ignore_user_abort = On; Determines the size of the realpath cache to be used by PHP. This value should ; be increased on systems where PHP opens many files to reflect the quantity of ; the file operations performed. ; realpath_cache_size=16k; Duration of time, in seconds for which to cache realpath information for a given ; file or directory. For systems with rarely changing files, consider increasing this ; value. ; realpath_cache_ttl=120; ; Misc ; ; Decides whether PHP may expose the fact that it is installed on the server ; (e.g. by adding its signature to the Web server header). It is no security ; threat in any way, but it makes it possible to determine whether you use PHP ; on your server or not. expose_php = On ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;;max_execution_time = 30 ; Maximum execution time of each script, in seconds max_input_time = 60 ; Maximum amount of time each script may spend parsing request data ;max_input_nesting_level = 64 ; Maximum input variable nesting level memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; error_reporting is a bit-field. Or each number up to get desired error ; reporting level ; E_ALL - All errors and warnings (doesn't include E_STRICT) ; E_ERROR - fatal run-time errors ; E_RECOVERABLE_ERROR - almost fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often result ; from a bug in your code, but it's possible that it was ; intentional (e.g., using an uninitialized variable and ; relying on the fact it's automatically initialized to an ; empty string) ; E_STRICT - run-time notices, enable to have PHP suggest changes ; to your code which will ensure the best interoperability ; and forward compatibility of your code ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; ; Examples: ; ; - Show all errors, except for notices and coding standards warnings ; ;error_reporting = E_ALL & ~E_NOTICE ; ; - Show all errors, except for notices ; ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT ; ; - Show only errors ; ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR ; ; - Show all errors except for notices and coding standards warnings ; error_reporting = E_ALL & ~E_NOTICE; Print out errors (as a part of the output). For production web sites, ; you're strongly encouraged to turn this feature off, and use error logging ; instead (see below). Keeping display_errors enabled on a production web site ; may reveal security information to end users, such as file paths on your Web ; server, your database schema or other information. ; ; possible values for display_errors: ; ; Off - Do not display any errors ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!) ; ;display_errors = "stderr" ; ; stdout (On) - Display errors to STDOUT ; display_errors = On; Even when display_errors is on, errors that occur during PHP's startup ; sequence are not displayed. It's strongly recommended to keep ; display_startup_errors off, except for when debugging. display_startup_errors = Off; Log errors into a log file (server-specific log, stderr, or error_log (below)) ; As stated above, you're strongly advised to use error logging in place of ; error displaying on production web sites. log_errors = Off; Set maximum length of log_errors. In error_log information about the source is ; added. The default is 1024 and 0 allows to not apply any maximum length at all. log_errors_max_len = 1024; Do not log repeated messages. Repeated errors must occur in same file on same ; line until ignore_repeated_source is set true. ignore_repeated_errors = Off; Ignore source of message when ignoring repeated messages. When this setting ; is On you will not log errors with repeated messages from different files or ; source lines. ignore_repeated_source = Off; If this parameter is set to Off, then memory leaks will not be shown (on ; stdout or in the log). This has only effect in a debug compile, and if ; error reporting includes E_WARNING in the allowed list report_memleaks = On;report_zend_debug = 0; Store the last error/warning message in $php_errormsg (boolean). track_errors = Off; Disable the inclusion of HTML tags in error messages. ; Note: Never use this feature for production boxes. ;html_errors = Off; If html_errors is set On PHP produces clickable error messages that direct ; to a page describing the error or function causing the error in detail. ; You can download a copy of the PHP manual from http://www.php.net/docs.php ; and change docref_root to the base URL of your local copy including the ; leading '/'. You must also specify the file extension being used including ; the dot. ; Note: Never use this feature for production boxes. ;docref_root = "/phpmanual/" ;docref_ext = .html; String to output before an error message. ;error_prepend_string = "<font color=ff0000>"; String to output after an error message. ;error_append_string = "</font>"; Log errors to specified file. ;error_log = filename; Log errors to syslog (Event Log on NT, not valid in Windows 95). ;error_log = syslog ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; ; ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3; The separator used in PHP generated URLs to separate arguments. ; Default is "&". ;arg_separator.output = "&"; List of separator(s) used by PHP to parse input URLs into variables. ; Default is "&". ; NOTE: Every character in this directive is considered as separator! ;arg_separator.input = ";&"; This directive describes the order in which PHP registers GET, POST, Cookie, ; Environment and Built-in variables (G, P, C, E & S respectively, often ; referred to as EGPCS or GPC). Registration is done from left to right, newer ; values override older values. variables_order = "EGPCS"; Whether or not to register the EGPCS variables as global variables. You may ; want to turn this off if you don't want to clutter your scripts' global scope ; with user data. This makes most sense when coupled with track_vars - in which ; case you can access all of the GPC variables through the $HTTP_*_VARS[], ; variables. ; ; You should do your best to write your scripts so that they do not require ; register_globals to be on; Using form variables as globals can easily lead ; to possible security problems, if the code is not very well thought of. register_globals = Off; Whether or not to register the old-style input arrays, HTTP_GET_VARS ; and friends. If you're not using them, it's recommended to turn them off, ; for performance reasons. register_long_arrays = On; This directive tells PHP whether to declare the argv&argc variables (that ; would contain the GET information). If you don't use these variables, you ; should turn it off for increased performance. register_argc_argv = On; When enabled, the SERVER and ENV variables are created when they're first ; used (Just In Time) instead of when the script starts. If these variables ; are not used within a script, having this directive on will result in a ; performance gain. The PHP directives register_globals, register_long_arrays, ; and register_argc_argv must be disabled for this directive to have any affect. auto_globals_jit = On; Maximum size of POST data that PHP will accept. post_max_size = 8M; Magic quotes ;; Magic quotes for incoming GET/POST/Cookie data. magic_quotes_gpc = On; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. magic_quotes_runtime = Off; Use Sybase-style magic quotes (escape ' with '' instead of \'). magic_quotes_sybase = Off; Automatically add files before or after any PHP document. auto_prepend_file = auto_append_file =; As of 4.0b4, PHP always outputs a character encoding by default in ; the Content-type: header. To disable sending of the charset, simply ; set it to be empty. ; ; PHP's built-in default is text/html default_mimetype = "text/html" ;default_charset = "iso-8859-1"; Always populate the $HTTP_RAW_POST_DATA variable. ;always_populate_raw_post_data = On
;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;;; UNIX: "/path1:/path2" ;include_path = "E:/php/includes" ; ; Windows: "\path1;\path2" ;include_path = ".;c:\php\includes"; The root of the PHP pages, used only if nonempty. ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root ; if you are running php as a CGI under any web server (other than IIS) ; see documentation for security issues. The alternate is to use the ; cgi.force_redirect configuration below doc_root = E:\Apache2.2\htdocs; The directory under which PHP opens the script using /~username used only ; if nonempty. user_dir =; Directory in which the loadable extensions (modules) reside. extension_dir = E:/php; Whether or not to enable the dl() function. The dl() function does NOT work ; properly in multithreaded servers, such as IIS or Zeus, and is automatically ; disabled on them. enable_dl = On; cgi.force_redirect is necessary to provide security running PHP as a CGI under ; most web servers. Left undefined, PHP turns this on by default. You can ; turn it off here AT YOUR OWN RISK ; **You CAN safely turn this off for IIS, in fact, you MUST.** ; cgi.force_redirect = 1; if cgi.nph is enabled it will force cgi to always sent Status: 200 with ; every request. ; cgi.nph = 1; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP ; will look for to know it is OK to continue execution. Setting this variable MAY ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. ; cgi.redirect_status_env = ;; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. ; cgi.fix_pathinfo=0; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate ; security tokens of the calling client. This allows IIS to define the ; security context that the request runs under. mod_fastcgi under Apache ; does not currently support this feature (03/17/2002) ; Set to 1 if running under IIS. Default is zero. ; fastcgi.impersonate = 1;; Disable logging through FastCGI connection ; fastcgi.logging = 0; cgi.rfc2616_headers configuration option tells PHP what type of headers to ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that ; is supported by Apache. When this option is set to 1 PHP will send ; RFC2616 compliant header. ; Default is zero. ;cgi.rfc2616_headers = 0 ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;;; Whether to allow HTTP file uploads. file_uploads = On; Temporary directory for HTTP uploaded files (will use system default if not ; specified). ;upload_tmp_dir =; Maximum allowed size for uploaded files. upload_max_filesize = 2M ;;;;;;;;;;;;;;;;;; ; Fopen wrappers ; ;;;;;;;;;;;;;;;;;;; Whether to allow the treatment of URLs (like http:// or ftp://) as files. allow_url_fopen = On; Whether to allow include/require to open URLs (like http:// or ftp://) as files. allow_url_include = Off; Define the anonymous ftp password (your email address) ;from="[email protected]"; Define the User-Agent string ; user_agent="PHP"; Default timeout for socket based streams (seconds) default_socket_timeout = 60; If your scripts have to deal with files from Macintosh systems, ; or you are running on a Mac and need to deal with files from ; unix or win32 systems, setting this flag will cause PHP to ; automatically detect the EOL character in those files so that ; fgets() and file() will work regardless of the source of the file. ; auto_detect_line_endings = Off ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; ; ; If you wish to have an extension loaded automatically, use the following ; syntax: ; ; extension=modulename.extension ; ; For example, on Windows: ; extension=msql.dll ; ; ... or under UNIX: ; ; extension=msql.so ; ; Note that it should be the name of the module only; no directory information ; needs to go here. Specify the location of the extension with the ; extension_dir directive above. ; Windows Extensions ; Note that ODBC support is built in, so no dll is needed for it. ; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) ; extension folders as well as the separate PECL DLL download (PHP 5). ; Be sure to appropriately set the extension_dir directive.extension=php_bz2.dll extension=php_curl.dll extension=php_dba.dll extension=php_dbase.dll extension=php_exif.dll extension=php_fdf.dll extension=php_gd2.dll extension=php_gettext.dll extension=php_gmp.dll extension=php_ifx.dll extension=php_imap.dll extension=php_interbase.dll extension=php_ldap.dll extension=php_mbstring.dll extension=php_mcrypt.dll extension=php_mhash.dll extension=php_mime_magic.dll extension=php_ming.dll extension=php_msql.dll extension=php_mssql.dll extension=php_mysql.dll extension=php_mysqli.dll extension=php_oci8.dll extension=php_openssl.dll extension=php_pdo.dll extension=php_pdo_firebird.dll extension=php_pdo_mssql.dll extension=php_pdo_mysql.dll extension=php_pdo_oci.dll extension=php_pdo_oci8.dll extension=php_pdo_odbc.dll extension=php_pdo_pgsql.dll extension=php_pdo_sqlite.dll extension=php_pgsql.dll extension=php_pspell.dll extension=php_shmop.dll extension=php_snmp.dll extension=php_soap.dll extension=php_sockets.dll extension=php_sqlite.dll extension=php_sybase_ct.dll extension=php_tidy.dll extension=php_xmlrpc.dll extension=php_xsl.dll extension=php_zip.dll
;;;;;;;;;;;;;;;;;;; ; Module Settings ; ;;;;;;;;;;;;;;;;;;;[Date] ; Defines the default timezone used by the date functions ;date.timezone =;date.default_latitude = 31.7667 ;date.default_longitude = 35.2333;date.sunrise_zenith = 90.583333 ;date.sunset_zenith = 90.583333[filter] ;filter.default = unsafe_raw ;filter.default_flags =[iconv] ;iconv.input_encoding = ISO-8859-1 ;iconv.internal_encoding = ISO-8859-1 ;iconv.output_encoding = ISO-8859-1[sqlite] ;sqlite.assoc_case = 0[xmlrpc] ;xmlrpc_error_number = 0 ;xmlrpc_errors = 0[Pcre] ;PCRE library backtracking limit. ;pcre.backtrack_limit=100000;PCRE library recursion limit. ;Please note that if you set this value to a high number you may consume all ;the available process stack and eventually crash PHP (due to reaching the ;stack size limit imposed by the Operating System). ;pcre.recursion_limit=100000[Syslog] ; Whether or not to define the various syslog variables (e.g. $LOG_PID, ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In ; runtime, you can define these variables by calling define_syslog_variables(). define_syslog_variables = Off[mail function] ; For Win32 only. SMTP = localhost smtp_port = 25; For Win32 only. ;sendmail_from = [email protected]; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). ;sendmail_path =; Force the addition of the specified parameters to be passed as extra parameters ; to the sendmail binary. These parameters will always replace the value of ; the 5th parameter to mail(), even in safe mode. ;mail.force_extra_parameters =[SQL] sql.safe_mode = Off[ODBC] ;odbc.default_db = Not yet implemented ;odbc.default_user = Not yet implemented ;odbc.default_pw = Not yet implemented; Allow or prevent persistent links. odbc.allow_persistent = On; Check that a connection is still valid before reuse. odbc.check_persistent = On; Maximum number of persistent links. -1 means no limit. odbc.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit. odbc.max_links = -1; Handling of LONG fields. Returns number of bytes to variables. 0 means ; passthru. odbc.defaultlrl = 4096; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation ; of uodbc.defaultlrl and uodbc.defaultbinmode odbc.defaultbinmode = 1[MySQL] ; Allow or prevent persistent links. mysql.allow_persistent = On; Maximum number of persistent links. -1 means no limit. mysql.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit. mysql.max_links = -1; Default port number for mysql_connect(). If unset, mysql_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. mysql.default_port =; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. mysql.default_socket =; Default host for mysql_connect() (doesn't apply in safe mode). mysql.default_host =; Default user for mysql_connect() (doesn't apply in safe mode). mysql.default_user =; Default password for mysql_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. mysql.default_password =; Maximum time (in seconds) for connect timeout. -1 means no limit mysql.connect_timeout = 60; Trace mode. When trace_mode is active (=On), warnings for table/index scans and ; SQL-Errors will be displayed. mysql.trace_mode = Off[MySQLi]; Maximum number of links. -1 means no limit. mysqli.max_links = -1; Default port number for mysqli_connect(). If unset, mysqli_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. mysqli.default_port = 3306; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. mysqli.default_socket =; Default host for mysql_connect() (doesn't apply in safe mode). mysqli.default_host =; Default user for mysql_connect() (doesn't apply in safe mode). mysqli.default_user =; Default password for mysqli_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. mysqli.default_pw =; Allow or prevent reconnect mysqli.reconnect = Off[mSQL] ; Allow or prevent persistent links. msql.allow_persistent = On; Maximum number of persistent links. -1 means no limit. msql.max_persistent = -1; Maximum number of links (persistent+non persistent). -1 means no limit. msql.max_links = -1[OCI8] ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA) ;oci8.privileged_connect = Off; Connection: The maximum number of persistent OCI8 connections per ; process. Using -1 means no limit. ;oci8.max_persistent = -1; Connection: The maximum number of seconds a process is allowed to ; maintain an idle persistent connection. Using -1 means idle ; persistent connections will be maintained forever. ;oci8.persistent_timeout = -1; Connection: The number of seconds that must pass before issuing a ; ping during oci_pconnect() to check the connection validity. When ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables ; pings completely. ;oci8.ping_interval = 60; Tuning: This option enables statement caching, and specifies how ; many statements to cache. Using 0 disables statement caching. ;oci8.statement_cache_size = 20; Tuning: Enables statement prefetching and sets the default number of ; rows that will be fetched automatically after statement execution. ;oci8.default_prefetch = 10; Compatibility. Using On means oci_close() will not close ; oci_connect() and oci_new_connect() connections. ;oci8.old_oci_close_semantics = Off[PostgresSQL] ; Allow or prevent persistent links. pgsql.allow_persistent = On; Detect broken persistent links always with pg_pconnect(). ; Auto reset feature requires a little overheads. pgsql.auto_reset_persistent = Off; Maximum number of persistent links. -1 means no limit. pgsql.max_persistent = -1; Maximum number of links (persistent+non persistent). -1 means no limit. pgsql.max_links = -1; Ignore PostgreSQL backends Notice message or not. ; Notice message logging require a little overheads. pgsql.ignore_notice = 0; Log PostgreSQL backends Noitce message or not. ; Unless pgsql.ignore_notice=0, module cannot log notice message. pgsql.log_notice = 0
[Sybase] ; Allow or prevent persistent links. sybase.allow_persistent = On; Maximum number of persistent links. -1 means no limit. sybase.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit. sybase.max_links = -1;sybase.interface_file = "/usr/sybase/interfaces"; Minimum error severity to display. sybase.min_error_severity = 10; Minimum message severity to display. sybase.min_message_severity = 10; Compatibility mode with old versions of PHP 3.0. ; If on, this will cause PHP to automatically assign types to results according ; to their Sybase type, instead of treating them all as strings. This ; compatibility mode will probably not stay around forever, so try applying ; whatever necessary changes to your code, and turn it off. sybase.compatability_mode = Off[Sybase-CT] ; Allow or prevent persistent links. sybct.allow_persistent = On; Maximum number of persistent links. -1 means no limit. sybct.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit. sybct.max_links = -1; Minimum server message severity to display. sybct.min_server_severity = 10; Minimum client message severity to display. sybct.min_client_severity = 10[bcmath] ; Number of decimal digits for all bcmath functions. bcmath.scale = 0[browscap] ;browscap = extra/browscap.ini[Informix] ; Default host for ifx_connect() (doesn't apply in safe mode). ifx.default_host =; Default user for ifx_connect() (doesn't apply in safe mode). ifx.default_user =; Default password for ifx_connect() (doesn't apply in safe mode). ifx.default_password =; Allow or prevent persistent links. ifx.allow_persistent = On; Maximum number of persistent links. -1 means no limit. ifx.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit. ifx.max_links = -1; If on, select statements return the contents of a text blob instead of its id. ifx.textasvarchar = 0; If on, select statements return the contents of a byte blob instead of its id. ifx.byteasvarchar = 0; Trailing blanks are stripped from fixed-length char columns. May help the ; life of Informix SE users. ifx.charasvarchar = 0; If on, the contents of text and byte blobs are dumped to a file instead of ; keeping them in memory. ifx.blobinfile = 0; NULL's are returned as empty strings, unless this is set to 1. In that case, ; NULL's are returned as string 'NULL'. ifx.nullformat = 0
[Session] ; Handler used to store/retrieve data. session.save_handler = files; Argument passed to save_handler. In the case of files, this is the path ; where data files are stored. Note: Windows users have to change this ; variable in order to use PHP's session functions. ; ; As of PHP 4.0.1, you can define the path as: ; ; session.save_path = E:\path ; ; where N is an integer. Instead of storing all the session files in ; /path, what this will do is use subdirectories N-levels deep, and ; store the session data in those directories. This is useful if you ; or your OS have problems with lots of files in one directory, and is ; a more efficient layout for servers that handle lots of sessions. ; ; NOTE 1: PHP will not create this directory structure automatically. ; You can use the script in the ext/session dir for that purpose. ; NOTE 2: See the section on garbage collection below if you choose to ; use subdirectories for session storage ; ; The file storage module creates files using mode 600 by default. ; You can change that by using ; ; session.save_path = "N;MODE;/path" ; ; where MODE is the octal representation of the mode. Note that this ; does not overwrite the process's umask. ;session.save_path = "/tmp"; Whether to use cookies. session.use_cookies = 1;session.cookie_secure = ; This option enables administrators to make their users invulnerable to ; attacks which involve passing session ids in URLs; defaults to 0. ; session.use_only_cookies = 1; Name of the session (used as cookie name). session.name = PHPSESSID; Initialize session on request startup. session.auto_start = 0; Lifetime in seconds of cookie or, if 0, until browser is restarted. session.cookie_lifetime = 0; The path for which the cookie is valid. session.cookie_path = /; The domain for which the cookie is valid. session.cookie_domain =; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. session.cookie_httponly = ; Handler used to serialize data. php is the standard serializer of PHP. session.serialize_handler = php; Define the probability that the 'garbage collection' process is started ; on every session initialization. ; The probability is calculated by using gc_probability/gc_divisor, ; e.g. 1/100 means there is a 1% chance that the GC process starts ; on each request.session.gc_probability = 1 session.gc_divisor = 100; After this number of seconds, stored data will be seen as 'garbage' and ; cleaned up by the garbage collection process. session.gc_maxlifetime = 1440; NOTE: If you are using the subdirectory option for storing session files ; (see session.save_path above), then garbage collection does *not* ; happen automatically. You will need to do your own garbage ; collection through a shell script, cron entry, or some other method. ; For example, the following script would is the equivalent of ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): ; cd /path/to/sessions; find -cmin +24 | xargs rm; PHP 4.2 and less have an undocumented feature/bug that allows you to ; to initialize a session variable in the global scope, albeit register_globals ; is disabled. PHP 4.3 and later will warn you, if this feature is used. ; You can disable the feature and the warning separately. At this time, ; the warning is only displayed, if bug_compat_42 is enabled.session.bug_compat_42 = 1 session.bug_compat_warn = 1; Check HTTP Referer to invalidate externally stored URLs containing ids. ; HTTP_REFERER has to contain this substring for the session to be ; considered as valid. session.referer_check =; How many bytes to read from the file. session.entropy_length = 0; Specified here to create the session id. session.entropy_file =;session.entropy_length = 16;session.entropy_file = /dev/urandom; Set to {nocache,private,public,} to determine HTTP caching aspects ; or leave this empty to avoid sending anti-caching headers. session.cache_limiter = nocache; Document expires after n minutes. session.cache_expire = 180; trans sid support is disabled by default. ; Use of trans sid may risk your users security. ; Use this option with caution. ; - User may send URL contains active session ID ; to other person via. email/irc/etc. ; - URL that contains active session ID may be stored ; in publically accessible computer. ; - User may access your site with the same session ID ; always using URL stored in browser's history or books. session.use_trans_sid = 0; Select a hash function ; 0: MD5 (128 bits) ; 1: SHA-1 (160 bits) session.hash_function = 0; Define how many bits are stored in each character when converting ; the binary hash data to something readable. ; ; 4 bits: 0-9, a-f ; 5 bits: 0-9, a-v ; 6 bits: 0-9, a-z, A-Z, "-", "," session.hash_bits_per_character = 4; The URL rewriter will look for URLs in a defined set of HTML tags. ; form/fieldset are special; if you include them here, the rewriter will ; add a hidden <input> field with the info which is otherwise appended ; to URLs. If you want XHTML conformity, remove the form entry. ; Note that all valid entries require a "=", even if no value follows. url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="[MSSQL] ; Allow or prevent persistent links. mssql.allow_persistent = On; Maximum number of persistent links. -1 means no limit. mssql.max_persistent = -1; Maximum number of links (persistent+non persistent). -1 means no limit. mssql.max_links = -1; Minimum error severity to display. mssql.min_error_severity = 10; Minimum message severity to display. mssql.min_message_severity = 10; Compatibility mode with old versions of PHP 3.0. mssql.compatability_mode = Off; Connect timeout ;mssql.connect_timeout = 5; Query timeout ;mssql.timeout = 60; Valid range 0 - 2147483647. Default = 4096. ;mssql.textlimit = 4096; Valid range 0 - 2147483647. Default = 4096. ;mssql.textsize = 4096; Limits the number of records in each batch. 0 = all records in one batch. ;mssql.batchsize = 0; Specify how datetime and datetim4 columns are returned ; On => Returns data converted to SQL server settings ; Off => Returns values as YYYY-MM-DD hh:mm:ss ;mssql.datetimeconvert = On; Use NT authentication when connecting to the server mssql.secure_connection = Off; Specify max number of processes. -1 = library default ; msdlib defaults to 25 ; FreeTDS defaults to 4096 ;mssql.max_procs = -1; Specify client character set. ; If empty or not set the client charset from freetds.comf is used ; This is only used when compiled with FreeTDS ;mssql.charset = "ISO-8859-1"[Assertion] ; Assert(expr); active by default. ;assert.active = On; Issue a PHP warning for each failed assertion. ;assert.warning = On; Don't bail out by default. ;assert.bail = Off; User-function to be called if an assertion fails. ;assert.callback = 0; Eval the expression with current error_reporting(). Set to true if you want ; error_reporting(0) around the eval(). ;assert.quiet_eval = 0
[COM] ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs ;com.typelib_file = ; allow Distributed-COM calls ;com.allow_dcom = true ; autoregister constants of a components typlib on com_load() ;com.autoregister_typelib = true ; register constants casesensitive ;com.autoregister_casesensitive = false ; show warnings on duplicate constant registrations ;com.autoregister_verbose = true[mbstring] ; language for internal character representation. ;mbstring.language = Japanese; internal/script encoding. ; Some encoding cannot work as internal encoding. ; (e.g. SJIS, BIG5, ISO-2022-*) ;mbstring.internal_encoding = EUC-JP; http input encoding. ;mbstring.http_input = auto; http output encoding. mb_output_handler must be ; registered as output buffer to function ;mbstring.http_output = SJIS; enable automatic encoding translation according to ; mbstring.internal_encoding setting. Input chars are ; converted to internal encoding by setting this to On. ; Note: Do _not_ use automatic encoding translation for ; portable libs/applications. ;mbstring.encoding_translation = Off; automatic encoding detection order. ; auto means ;mbstring.detect_order = auto; substitute_character used when character cannot be converted ; one from another ;mbstring.substitute_character = none;; overload(replace) single byte functions by mbstring functions. ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), ; etc. Possible values are 0,1,2,4 or combination of them. ; For example, 7 for overload everything. ; 0: No overload ; 1: Overload mail() function ; 2: Overload str*() functions ; 4: Overload ereg*() functions ;mbstring.func_overload = 0[FrontBase] ;fbsql.allow_persistent = On ;fbsql.autocommit = On ;fbsql.show_timestamp_decimals = Off ;fbsql.default_database = ;fbsql.default_database_password = ;fbsql.default_host = ;fbsql.default_password = ;fbsql.default_user = "_SYSTEM" ;fbsql.generate_warnings = Off ;fbsql.max_connections = 128 ;fbsql.max_links = 128 ;fbsql.max_persistent = -1 ;fbsql.max_results = 128[gd] ; Tell the jpeg decode to libjpeg warnings and try to create ; a gd image. The warning will then be displayed as notices ; disabled by default ;gd.jpeg_ignore_warning = 0[exif] ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. ; With mbstring support this will automatically be converted into the encoding ; given by corresponding encode setting. When empty mbstring.internal_encoding ; is used. For the decode settings you can distinguish between motorola and ; intel byte order. A decode setting cannot be empty. ;exif.encode_unicode = ISO-8859-15 ;exif.decode_unicode_motorola = UCS-2BE ;exif.decode_unicode_intel = UCS-2LE ;exif.encode_jis = ;exif.decode_jis_motorola = JIS ;exif.decode_jis_intel = JIS[Tidy] ; The path to a default tidy configuration file to use when using tidy ;tidy.default_config = /usr/local/lib/php/default.tcfg; Should tidy clean and repair output automatically? ; WARNING: Do not use this option if you are generating non-html content ; such as dynamic images tidy.clean_output = Off[soap] ; Enables or disables WSDL caching feature. soap.wsdl_cache_enabled=1 ; Sets the directory name where SOAP extension will put cache files. soap.wsdl_cache_dir="/tmp" ; (time to live) Sets the number of second while cached file will be used ; instead of original one. soap.wsdl_cache_ttl=86400; Local Variables: ; tab-width: 4 ; End:
;extension=php_mysql.dll
是否把前面的;去掉
我php.ini的配置 已经把所有的extension=XXXXX 的选项//都去掉! 他还是不行!下面是我的配置 由于太长 分段发上来!麻烦帮忙看看 谢谢!!!!
[PHP];;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.
;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;
;
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).
;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;; Enable the PHP scripting language engine under Apache.
engine = On; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On; Allow ASP-style <% %> tags.
asp_tags = Off; The number of significant digits displayed in floating point numbers.
precision = 12; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = Off; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
;zlib.output_compression_level = -1; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = On
我php.ini的配置 已经把所有的extension=XXXXX 的选项//都去掉! 他还是不行!下面是我的配置 由于太长 分段发上来!麻烦帮忙看看 谢谢!!!!
[PHP];;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.
;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;
;
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).
;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;; Enable the PHP scripting language engine under Apache.
engine = On; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On; Allow ASP-style <% %> tags.
asp_tags = Off; The number of significant digits displayed in floating point numbers.
precision = 12; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = Off; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
;zlib.output_compression_level = -1; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = On
;
; Safe Mode
;
safe_mode = Off; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
;open_basedir =; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <span style="color: ???????"> would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long request, which may end up
; being interrupted by the user or a browser timing out.
; ignore_user_abort = On; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; realpath_cache_size=16k; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; realpath_cache_ttl=120;
; Misc
;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On
;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;max_execution_time = 30 ; Maximum execution time of each script, in seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
;max_input_nesting_level = 64 ; Maximum input variable nesting level
memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings (doesn't include E_STRICT)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
;
; Examples:
;
; - Show all errors, except for notices and coding standards warnings
;
;error_reporting = E_ALL & ~E_NOTICE
;
; - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
;
; - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
;
; - Show all errors except for notices and coding standards warnings
;
error_reporting = E_ALL & ~E_NOTICE; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below). Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
;
; possible values for display_errors:
;
; Off - Do not display any errors
; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
;
;display_errors = "stderr"
;
; stdout (On) - Display errors to STDOUT
;
display_errors = On; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = Off; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
ignore_repeated_source = Off; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On;report_zend_debug = 0; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"; String to output after an error message.
;error_append_string = "</font>"; Log errors to specified file.
;error_log = filename; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right, newer
; values override older values.
variables_order = "EGPCS"; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn them off,
; for performance reasons.
register_long_arrays = On; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On; When enabled, the SERVER and ENV variables are created when they're first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
auto_globals_jit = On; Maximum size of POST data that PHP will accept.
post_max_size = 8M; Magic quotes
;; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = On; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;; UNIX: "/path1:/path2"
;include_path = "E:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root = E:\Apache2.2\htdocs; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =; Directory in which the loadable extensions (modules) reside.
extension_dir = E:/php; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; cgi.fix_pathinfo=0; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;; Disable logging through FastCGI connection
; fastcgi.logging = 0; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;; Whether to allow HTTP file uploads.
file_uploads = On; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =; Maximum allowed size for uploaded files.
upload_max_filesize = 2M
;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
allow_url_include = Off; Define the anonymous ftp password (your email address)
;from="[email protected]"; Define the User-Agent string
; user_agent="PHP"; Default timeout for socket based streams (seconds)
default_socket_timeout = 60; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off
;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename.extension
;
; For example, on Windows:
;
extension=msql.dll
;
; ... or under UNIX:
;
; extension=msql.so
;
; Note that it should be the name of the module only; no directory information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.
; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.extension=php_bz2.dll
extension=php_curl.dll
extension=php_dba.dll
extension=php_dbase.dll
extension=php_exif.dll
extension=php_fdf.dll
extension=php_gd2.dll
extension=php_gettext.dll
extension=php_gmp.dll
extension=php_ifx.dll
extension=php_imap.dll
extension=php_interbase.dll
extension=php_ldap.dll
extension=php_mbstring.dll
extension=php_mcrypt.dll
extension=php_mhash.dll
extension=php_mime_magic.dll
extension=php_ming.dll
extension=php_msql.dll
extension=php_mssql.dll
extension=php_mysql.dll
extension=php_mysqli.dll
extension=php_oci8.dll
extension=php_openssl.dll
extension=php_pdo.dll
extension=php_pdo_firebird.dll
extension=php_pdo_mssql.dll
extension=php_pdo_mysql.dll
extension=php_pdo_oci.dll
extension=php_pdo_oci8.dll
extension=php_pdo_odbc.dll
extension=php_pdo_pgsql.dll
extension=php_pdo_sqlite.dll
extension=php_pgsql.dll
extension=php_pspell.dll
extension=php_shmop.dll
extension=php_snmp.dll
extension=php_soap.dll
extension=php_sockets.dll
extension=php_sqlite.dll
extension=php_sybase_ct.dll
extension=php_tidy.dll
extension=php_xmlrpc.dll
extension=php_xsl.dll
extension=php_zip.dll
; Module Settings ;
;;;;;;;;;;;;;;;;;;;[Date]
; Defines the default timezone used by the date functions
;date.timezone =;date.default_latitude = 31.7667
;date.default_longitude = 35.2333;date.sunrise_zenith = 90.583333
;date.sunset_zenith = 90.583333[filter]
;filter.default = unsafe_raw
;filter.default_flags =[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1[sqlite]
;sqlite.assoc_case = 0[xmlrpc]
;xmlrpc_error_number = 0
;xmlrpc_errors = 0[Pcre]
;PCRE library backtracking limit.
;pcre.backtrack_limit=100000;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
;pcre.recursion_limit=100000[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables = Off[mail function]
; For Win32 only.
SMTP = localhost
smtp_port = 25; For Win32 only.
;sendmail_from = [email protected]; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path =; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =[SQL]
sql.safe_mode = Off[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented; Allow or prevent persistent links.
odbc.allow_persistent = On; Check that a connection is still valid before reuse.
odbc.check_persistent = On; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit.
odbc.max_links = -1; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit.
mysql.max_links = -1; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysql.default_port =; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =; Maximum time (in seconds) for connect timeout. -1 means no limit
mysql.connect_timeout = 60; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off[MySQLi]; Maximum number of links. -1 means no limit.
mysqli.max_links = -1; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =; Allow or prevent reconnect
mysqli.reconnect = Off[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1[OCI8]
; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
;oci8.privileged_connect = Off; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
;oci8.max_persistent = -1; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
;oci8.persistent_timeout = -1; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
;oci8.ping_interval = 60; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
;oci8.statement_cache_size = 20; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
;oci8.default_prefetch = 10; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
;oci8.old_oci_close_semantics = Off[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0
; Allow or prevent persistent links.
sybase.allow_persistent = On; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybase.max_links = -1;sybase.interface_file = "/usr/sybase/interfaces"; Minimum error severity to display.
sybase.min_error_severity = 10; Minimum message severity to display.
sybase.min_message_severity = 10; Compatibility mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings. This
; compatibility mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybct.max_links = -1; Minimum server message severity to display.
sybct.min_server_severity = 10; Minimum client message severity to display.
sybct.min_client_severity = 10[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0[browscap]
;browscap = extra/browscap.ini[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =; Allow or prevent persistent links.
ifx.allow_persistent = On; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1; Maximum number of links (persistent + non-persistent). -1 means no limit.
ifx.max_links = -1; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0; Trailing blanks are stripped from fixed-length char columns. May help the
; life of Informix SE users.
ifx.charasvarchar = 0; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0; NULL's are returned as empty strings, unless this is set to 1. In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0
; Handler used to store/retrieve data.
session.save_handler = files; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
;
; As of PHP 4.0.1, you can define the path as:
;
; session.save_path = E:\path
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = "N;MODE;/path"
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
;session.save_path = "/tmp"; Whether to use cookies.
session.use_cookies = 1;session.cookie_secure = ; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1; Name of the session (used as cookie name).
session.name = PHPSESSID; Initialize session on request startup.
session.auto_start = 0; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0; The path for which the cookie is valid.
session.cookie_path = /; The domain for which the cookie is valid.
session.cookie_domain =; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
session.cookie_httponly = ; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.session.gc_probability = 1
session.gc_divisor = 100; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.session.bug_compat_42 = 1
session.bug_compat_warn = 1; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =; How many bytes to read from the file.
session.entropy_length = 0; Specified here to create the session id.
session.entropy_file =;session.entropy_length = 16;session.entropy_file = /dev/urandom; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache; Document expires after n minutes.
session.cache_expire = 180; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or books.
session.use_trans_sid = 0; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
;
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 4; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1; Minimum error severity to display.
mssql.min_error_severity = 10; Minimum message severity to display.
mssql.min_message_severity = 10; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off; Connect timeout
;mssql.connect_timeout = 5; Query timeout
;mssql.timeout = 60; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On; Use NT authentication when connecting to the server
mssql.secure_connection = Off; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1; Specify client character set.
; If empty or not set the client charset from freetds.comf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"[Assertion]
; Assert(expr); active by default.
;assert.active = On; Issue a PHP warning for each failed assertion.
;assert.warning = On; Don't bail out by default.
;assert.bail = Off; User-function to be called if an assertion fails.
;assert.callback = 0; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constant registrations
;com.autoregister_verbose = true[mbstring]
; language for internal character representation.
;mbstring.language = Japanese; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP; http input encoding.
;mbstring.http_input = auto; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.show_timestamp_decimals = Off
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128[gd]
; Tell the jpeg decode to libjpeg warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
;gd.jpeg_ignore_warning = 0[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400; Local Variables:
; tab-width: 4
; End:
详细教程看上面的连接 有详细帮助php5因为版权问题,默认去掉了对mysql的内置支持