想把一个form 的 TextBox里面的输入内容和一些其它字符发到PC的并口(lpt1),请各位大哥指教.
解决方案 »
- GridView添加事件无效
- 急!,Enterprise Library配置问题,谢谢高手帮助一下。
- 请问C#是不是脚本语言?
- 请问VSS6.0C在哪儿下载?谢谢
- spread控件怎么得到选择多行的值?大哥们帮帮忙。
- C# 控制 WndProc()接收处理消息的频率
- C#如何打开新窗口并设置控件。
- 求问诸位大神,如何用VS2012将C#代码中的十六进制代码替换为10进制
- 100分求可反射带参数方法的动态反射代码
- 哪位好心人有邮件发送和接收的源程序给小弟一份,分不是问题!!
- C# 刷新数据库的问题?
- 如何让客户端按下“文件更新”按钮后,从服务器上Copy指定目录下的所有文件覆盖客户机上指定目录下的文件(不需要版本比较,覆盖就可了)
ss_port.PortNum = COM1; //端口号
ss_port.BaudRate = 19200; //串口通信波特率
ss_port.ByteSize = 8; //数据位
ss_port.Parity = 0; //奇偶校验
ss_port.StopBits = 1;//停止位
ss_port.ReadTimeout = 1000; //读超时
try
{
if (ss_port.Opened)
{
ss_port.Close();
ss_port.Open(); //打开串口
}
else
{
ss_port.Open();//打开串口
}
return true;
}
catch(Exception e)
{
MessageBox.Show("错误:" + e.Message);
return false;
} 写串口: 函数原型:public void Write(byte[] WriteBytes) WriteBytes 就是你的写入的字节,注意,字符串要转换成字节数组才能进行通信 示例: ss_port.Write(Encoding.ASCII.GetBytes("AT+CGMI\r")); //获取手机品牌 读串口: 函数原型:public byte[] Read(int NumBytes) NumBytes 读入缓存数,注意读取来的是字节数组,要实际应用中要进行字符转换 示例: string response = Encoding.ASCII.GetString(ss_port.Read(128)); //读取128个字节缓存 关闭串口: 函数原型:ss_port.Close() 示例: ss_port.Close(); 整合代码:
using System;
using System.Runtime.InteropServices; namespace JustinIO {
class CommPort { public int PortNum;
public int BaudRate;
public byte ByteSize;
public byte Parity; // 0-4=no,odd,even,,space
public byte StopBits; // 0,1,2 = 1, 1.5, 2
public int ReadTimeout; //comm port win32 file handle
private int hComm = -1; public bool Opened = false; //win32 api constants
private const uint GENERIC_READ = 0x80000000;
private const uint GENERIC_WRITE = 0x40000000;
private const int OPEN_EXISTING = 3;
private const int INVALID_HANDLE_VALUE = -1; [StructLayout(LayoutKind.Sequential)]
public struct DCB {
//taken from c struct in platform sdk
public int DCBlength; // sizeof(DCB)
public int BaudRate; // current baud rate
/* these are the c struct bit fields, bit twiddle flag to set
public int fBinary; // binary mode, no EOF check
public int fParity; // enable parity checking
public int fOutxCtsFlow; // CTS output flow control
public int fOutxDsrFlow; // DSR output flow control
public int fDtrControl; // DTR flow control type
public int fDsrSensitivity; // DSR sensitivity
public int fTXContinueOnXoff; // XOFF continues Tx
public int fOutX; // XON/XOFF out flow control
public int fInX; // XON/XOFF in flow control
public int fErrorChar; // enable error replacement
public int fNull; // enable null stripping
public int fRtsControl; // RTS flow control
public int fAbortOnError; // abort on error
public int fDummy2; // reserved
*/
public uint flags;
public ushort wReserved; // not currently used
public ushort XonLim; // transmit XON threshold
public ushort XoffLim; // transmit XOFF threshold
public byte ByteSize; // number of bits/byte, 4-8
public byte Parity; // 0-4=no,odd,even,,space
public byte StopBits; // 0,1,2 = 1, 1.5, 2
public char XonChar; // Tx and Rx XON character
public char XoffChar; // Tx and Rx XOFF character
public char ErrorChar; // error replacement character
public char EofChar; // end of input character
public char EvtChar; // received event character
public ushort wReserved1; // reserved; do not use
} [StructLayout(LayoutKind.Sequential)]
private struct COMMTIMEOUTS {
public int ReadIntervalTimeout;
public int ReadTotalTimeoutMultiplier;
public int ReadTotalTimeoutConstant;
public int WriteTotalTimeoutMultiplier;
public int WriteTotalTimeoutConstant;
}
[StructLayout(LayoutKind.Sequential)]
private struct OVERLAPPED {
public int Internal;
public int InternalHigh;
public int Offset;
public int OffsetHigh;
public int hEvent;
} [DllImport("kernel32.dll")]
private static extern int CreateFile(
string lpFileName, // file name
uint dwDesiredAccess, // access mode
int dwShareMode, // share mode
int lpSecurityAttributes, // SD
int dwCreationDisposition, // how to create
int dwFlagsAndAttributes, // file attributes
int hTemplateFile // handle to template file
);
[DllImport("kernel32.dll")]
private static extern bool GetCommState(
int hFile, // handle to communications device
ref DCB lpDCB // device-control block
);
[DllImport("kernel32.dll")]
private static extern bool BuildCommDCB(
string lpDef, // device-control string
ref DCB lpDCB // device-control block
);
[DllImport("kernel32.dll")]
private static extern bool SetCommState(
int hFile, // handle to communications device
ref DCB lpDCB // device-control block
);
[DllImport("kernel32.dll")]
private static extern bool GetCommTimeouts(
int hFile, // handle to comm device
ref COMMTIMEOUTS lpCommTimeouts // time-out values
);
[DllImport("kernel32.dll")]
private static extern bool SetCommTimeouts(
int hFile, // handle to comm device
ref COMMTIMEOUTS lpCommTimeouts // time-out values
);
[DllImport("kernel32.dll")]
private static extern bool ReadFile(
int hFile, // handle to file
byte[] lpBuffer, // data buffer
int nNumberOfBytesToRead, // number of bytes to read
ref int lpNumberOfBytesRead, // number of bytes read
ref OVERLAPPED lpOverlapped // overlapped buffer
);
[DllImport("kernel32.dll")]
private static extern bool WriteFile(
int hFile, // handle to file
byte[] lpBuffer, // data buffer
int nNumberOfBytesToWrite, // number of bytes to write
ref int lpNumberOfBytesWritten, // number of bytes written
ref OVERLAPPED lpOverlapped // overlapped buffer
);
[DllImport("kernel32.dll")]
private static extern bool CloseHandle(
int hObject // handle to object
);
[DllImport("kernel32.dll")]
private static extern uint GetLastError(); public void Open() { DCB dcbCommPort = new DCB();
COMMTIMEOUTS ctoCommPort = new COMMTIMEOUTS();
// OPEN THE COMM PORT.
hComm = CreateFile("COM" + PortNum ,GENERIC_READ | GENERIC_WRITE,0, 0,OPEN_EXISTING,0,0); // IF THE PORT CANNOT BE OPENED, BAIL OUT.
if(hComm == INVALID_HANDLE_VALUE) {
throw(new ApplicationException("Comm Port Can Not Be Opened"));
} // SET THE COMM TIMEOUTS. GetCommTimeouts(hComm,ref ctoCommPort);
ctoCommPort.ReadTotalTimeoutConstant = ReadTimeout;
ctoCommPort.ReadTotalTimeoutMultiplier = 0;
ctoCommPort.WriteTotalTimeoutMultiplier = 0;
ctoCommPort.WriteTotalTimeoutConstant = 0;
SetCommTimeouts(hComm,ref ctoCommPort); // SET BAUD RATE, PARITY, WORD SIZE, AND STOP BITS.
GetCommState(hComm, ref dcbCommPort);
dcbCommPort.BaudRate=BaudRate;
dcbCommPort.flags=0;
//dcb.fBinary=1;
dcbCommPort.flags|=1;
if (Parity>0)
{
//dcb.fParity=1
dcbCommPort.flags|=2;
}
dcbCommPort.Parity=Parity;
dcbCommPort.ByteSize=ByteSize;
dcbCommPort.StopBits=StopBits;
if (!SetCommState(hComm, ref dcbCommPort))
{
//uint ErrorNum=GetLastError();
throw(new ApplicationException("Comm Port Can Not Be Opened"));
}
//unre to see if setting took correctly
//DCB dcbCommPort2 = new DCB();
//GetCommState(hComm, ref dcbCommPort2);
Opened = true; } public void Close() {
if (hComm!=INVALID_HANDLE_VALUE) {
CloseHandle(hComm);
}
}
public byte[] Read(int NumBytes) {
byte[] BufBytes;
byte[] OutBytes;
BufBytes = new byte[NumBytes];
if (hComm!=INVALID_HANDLE_VALUE) {
OVERLAPPED ovlCommPort = new OVERLAPPED();
int BytesRead=0;
ReadFile(hComm,BufBytes,NumBytes,ref BytesRead,ref ovlCommPort);
OutBytes = new byte[BytesRead];
Array.Copy(BufBytes,OutBytes,BytesRead);
}
else {
throw(new ApplicationException("Comm Port Not Open"));
}
return OutBytes;
} public void Write(byte[] WriteBytes) {
if (hComm!=INVALID_HANDLE_VALUE) {
OVERLAPPED ovlCommPort = new OVERLAPPED();
int BytesWritten = 0;
WriteFile(hComm,WriteBytes,WriteBytes.Length,ref BytesWritten,ref ovlCommPort);
}
else {
throw(new ApplicationException("Comm Port Not Open"));
}
}
} }
}