C#调用超级终端

网上找的
using System;
using System.Runtime.InteropServices;namespace Suntom.SMSService
{
/// <summary>
/// mycom 的摘要说明。
/// </summary>
public class MyCom
{
public MyCom()
{
//
// TODO: 在此处添加构造函数逻辑
//
}
public string PortNum; //1,2,3,4
public int BaudRate; //1200,2400,4800,9600
public byte ByteSize; //8 bits
public byte Parity; // 0-4=no,odd,even,,space
public byte StopBits; // 0,1,2 = 1, 1.5, 2
public int ReadTimeout; //10

//comm port win32 file handle
private int hComm = -1;

public bool Opened = false;

//win32 api constants
private const uint GENERIC_READ = 0x80000000;
private const uint GENERIC_WRITE = 0x40000000;
private const int OPEN_EXISTING = 3;
private const int INVALID_HANDLE_VALUE = -1;

[StructLayout(LayoutKind.Sequential)]
private struct DCB
{
//taken from c struct in platform sdk
public int DCBlength;           // sizeof(DCB)
public int BaudRate;            // current baud rate
public int fBinary;          // binary mode, no EOF check
public int fParity;          // enable parity checking
public int fOutxCtsFlow;      // CTS output flow control
public int fOutxDsrFlow;      // DSR output flow control
public int fDtrControl;       // DTR flow control type
public int fDsrSensitivity;   // DSR sensitivity
public int fTXContinueOnXoff; // XOFF continues Tx
public int fOutX;          // XON/XOFF out flow control
public int fInX;           // XON/XOFF in flow control
public int fErrorChar;     // enable error replacement
public int fNull;          // enable null stripping
public int fRtsControl;     // RTS flow control
public int fAbortOnError;   // abort on error
public int fDummy2;        // reserved
public ushort wReserved;          // not currently used
public ushort XonLim;             // transmit XON threshold
public ushort XoffLim;            // transmit XOFF threshold
public byte ByteSize;           // number of bits/byte, 4-8
public byte Parity;             // 0-4=no,odd,even,,space
public byte StopBits;           // 0,1,2 = 1, 1.5, 2
public char XonChar;            // Tx and Rx XON character
public char XoffChar;           // Tx and Rx XOFF character
public char ErrorChar;          // error replacement character
public char EofChar;            // end of input character
public char EvtChar;            // received event character
public ushort wReserved1;         // reserved; do not use
} [StructLayout(LayoutKind.Sequential)]
private struct COMMTIMEOUTS
{
public int ReadIntervalTimeout;
public int ReadTotalTimeoutMultiplier;
public int ReadTotalTimeoutConstant;
public int WriteTotalTimeoutMultiplier;
public int WriteTotalTimeoutConstant;
}   [StructLayout(LayoutKind.Sequential)]
private struct OVERLAPPED
{
public int  Internal;
public int  InternalHigh;
public int  Offset;
public int  OffsetHigh;
public int hEvent;
}

[DllImport("kernel32.dll")]
private static extern int CreateFile(
string lpFileName,                         // file name
uint dwDesiredAccess,                      // access mode
int dwShareMode,                          // share mode
int lpSecurityAttributes, // SD
int dwCreationDisposition,                // how to create
int dwFlagsAndAttributes,                 // file attributes
int hTemplateFile                        // handle to template file
);
[DllImport("kernel32.dll")]
private static extern bool GetCommState(
int hFile,  // handle to communications device
ref DCB lpDCB    // device-control block
);
[DllImport("kernel32.dll")]
private static extern bool BuildCommDCB(
string lpDef,  // device-control string
ref DCB lpDCB     // device-control block
);
[DllImport("kernel32.dll")]
private static extern bool SetCommState(
int hFile,  // handle to communications device
ref DCB lpDCB    // device-control block
);
[DllImport("kernel32.dll")]
private static extern bool GetCommTimeouts(
int hFile,                  // handle to comm device
ref COMMTIMEOUTS lpCommTimeouts  // time-out values
);
[DllImport("kernel32.dll")]
private static extern bool SetCommTimeouts(
int hFile,                  // handle to comm device
ref COMMTIMEOUTS lpCommTimeouts  // time-out values
);
[DllImport("kernel32.dll")]
private static extern bool ReadFile(
int hFile,                // handle to file
byte[] lpBuffer,             // data buffer
int nNumberOfBytesToRead,  // number of bytes to read
ref int lpNumberOfBytesRead, // number of bytes read
ref OVERLAPPED lpOverlapped    // overlapped buffer
);
[DllImport("kernel32.dll")]
private static extern bool WriteFile(
int hFile,                    // handle to file
byte[] lpBuffer,                // data buffer
int nNumberOfBytesToWrite,     // number of bytes to write
ref int lpNumberOfBytesWritten,  // number of bytes written
ref OVERLAPPED lpOverlapped        // overlapped buffer
);
[DllImport("kernel32.dll")]
private static extern bool CloseHandle(
int hObject   // handle to object
);

public void Open()
{

DCB dcbCommPort = new DCB();
COMMTIMEOUTS ctoCommPort = new COMMTIMEOUTS();


// OPEN THE COMM PORT.
hComm = CreateFile(PortNum ,GENERIC_READ | GENERIC_WRITE,0, 0,OPEN_EXISTING,0,0);

// IF THE PORT CANNOT BE OPENED, BAIL OUT.
if(hComm == INVALID_HANDLE_VALUE)
{
throw(new ApplicationException("Comm Port Can Not Be Opened"));
}

// SET THE COMM TIMEOUTS.

GetCommTimeouts(hComm,ref ctoCommPort);
ctoCommPort.ReadTotalTimeoutConstant = ReadTimeout;
ctoCommPort.ReadTotalTimeoutMultiplier = 0;
ctoCommPort.WriteTotalTimeoutMultiplier = 0;
ctoCommPort.WriteTotalTimeoutConstant = 0;
SetCommTimeouts(hComm,ref ctoCommPort);

// SET BAUD RATE, PARITY, WORD SIZE, AND STOP BITS.
// THERE ARE OTHER WAYS OF DOING SETTING THESE BUT THIS IS THE EASIEST.
// IF YOU WANT TO LATER ADD CODE FOR OTHER BAUD RATES, REMEMBER
// THAT THE ARGUMENT FOR BuildCommDCB MUST BE A POINTER TO A STRING.
// ALSO NOTE THAT BuildCommDCB() DEFAULTS TO NO HANDSHAKING.

dcbCommPort.DCBlength = Marshal.SizeOf(dcbCommPort);
GetCommState(hComm, ref dcbCommPort);
dcbCommPort.BaudRate=BaudRate;
dcbCommPort.Parity=Parity;
dcbCommPort.ByteSize=ByteSize;
dcbCommPort.StopBits=StopBits;
SetCommState(hComm, ref dcbCommPort);

Opened = true;

}

public void Close()
{
if (hComm!=INVALID_HANDLE_VALUE)
{
CloseHandle(hComm);
Opened=false;
}
}

public byte[] Read(int NumBytes)
{
byte[] BufBytes;
byte[] OutBytes;
BufBytes = new byte[NumBytes];
if (hComm!=INVALID_HANDLE_VALUE)
{
OVERLAPPED ovlCommPort = new OVERLAPPED();
int BytesRead=0;
ReadFile(hComm,BufBytes,NumBytes,ref BytesRead,ref ovlCommPort);
OutBytes = new byte[BytesRead];
Array.Copy(BufBytes,OutBytes,BytesRead);
}
else
{
throw(new ApplicationException("Comm Port Not Open"));
}
return OutBytes;
}

public int Write(byte[] WriteBytes)
{
int BytesWritten = 0;
if (hComm!=INVALID_HANDLE_VALUE)
{
OVERLAPPED ovlCommPort = new OVERLAPPED();
WriteFile(hComm,WriteBytes,WriteBytes.Length,ref BytesWritten,ref ovlCommPort);
}
else
{
throw(new ApplicationException("Comm Port Not Open"));
}
return BytesWritten;
}
}
}
发送at指令可以这样
string decodedSMS = sms.smsDecodedsms(m_CenterNo, mobile, content);
byte[] buf =Encoding.ASCII.GetBytes(String.Format("AT+CMGS={0}\r",sms.nLength));
ss_myCom.Write(buf);
用c#串口控件就可以了
#region Initialize Drive
        public void IniDrv(string sPort, int nBaud)
        {
            string sBack = "";
            try
            {
                bool bOpen = false;
                bOpen = InitCom(sPort, nBaud);                if (bOpen)
                {
                    //GET Modem Model
                    sBack = WriteAtCommand("AT+CGMI\r");
                    //check drive run status
                    if (sBack.IndexOf("ERROR") < 0 && sBack.Length > 17)
                    {
                        for (int i = 0; i <= 60; i++)
                        {
                            sBack = WriteAtCommand("AT+CMGF=0\r");
                            if (sBack.IndexOf("ERROR") < 0)
                            {
                                break;
                            }
                            else
                            {
                                Thread.Sleep(1000);
                                if (i == 60)
                                {
                                    throw new Exception("Initialize SMS Modem Fail!");
                                }
                            }
                        }
                        WriteAtCommand("AT+CNMI=0,1,0,0,0\r");
                        //set sms center number;
                        GetMsgCenterNumber();
                    }
                    else
                    {
                        throw new Exception("Initialize SMS Modem Fail!");
                    }
                }
            }
            catch (Exception e)
            {
                FreeDrv();
                throw e;
            }
        }
        private bool InitCom(string PortName, int PortNum)//初始化建串口类实例
        {
            try
            {
                sp = new SerialPort(PortName, PortNum, Parity.None, 8);
                sp.ReceivedBytesThreshold = 10;
                sp.Handshake = Handshake.RequestToSend;
                sp.Parity = Parity.None;
                sp.ReadTimeout = 600;
                sp.WriteTimeout = 600;
                if (!sp.IsOpen)
                {
                  sp.Open();
                }
                return true;
            }
            catch
            {
                throw new Exception("Serial Port Can't Open!");
            }
        }        #endregion        #region Free Drive
        public void FreeDrv()
        {
            if (sp != null)
            {
                sp.Dispose();
                sp.Close();
            }
        }
        #endregion

调试易

C#调用超级终端

解决方案 »