我用超级终端向设备发送命令,想做个中间程序,监听其中发送与返回的数据,能否给个思路? 另外我用VSPM虚拟串口调试助手虚拟了一个COM5,通过超级终端发送数据,我在超级终端是写什么,调试助手就接受什么(不需要按回车,如我输入“open”,调试助手接受栏里就是"open",想在超级终端输入AT命令,依然不是想要的结果,为什么?比如我在超级终端输入AT,应该在超级终端上显示OK....不太理解超级终端的机制,想监听数据也不知道怎么做...
调试欢乐多
http://download.cnet.com/ComTrace/3000-2218_4-75156892.html?tag=mncol感觉好别忘了给个review(评论),谢谢!FAQ
How to use it?
1.Run ComTrace
2.Select serial port name(e.g. COM1)
3.Run serial port application program that you want to debug(e.g. Windows HyperTerminal)
4.debug......(e.g. press any key in Windows HyperTerminal, then watch the data that is captured.)
5.Close application program(e.g. Windows HyperTerminal)
6.Close ComTraceNotice: You must operate by the order, only support Win2000 and WinXp(32 bit) system!