解决方案 »

  1.   

    用了另外一种方式实现!还是有bug
      

  2.   

    7.0以上会崩溃 ,6.0可以显示 但是需要选择一次方向才能可以!
    崩溃时的错误描述?Supported orientations has no common orientation with the application, and shouldAutorotate is returning YES
      

  3.   

    7.0以上会崩溃 ,6.0可以显示 但是需要选择一次方向才能可以!
    崩溃时的错误描述?Supported orientations has no common orientation with the application, and shouldAutorotate is returning YES
    这是因为你修改了工程的全局设置吧?那里相当于总开关,你这种情况,应该把横、竖屏都打开
      

  4.   

    7.0以上会崩溃 ,6.0可以显示 但是需要选择一次方向才能可以!
    崩溃时的错误描述?Supported orientations has no common orientation with the application, and shouldAutorotate is returning YES
    这是因为你修改了工程的全局设置吧?那里相当于总开关,你这种情况,应该把横、竖屏都打开
    这个不是我能控制的,我要做的是要进兼容这种程序!所以我才蛋疼!能自己控制就不会这么难了!
      

  5.   

    7.0以上会崩溃 ,6.0可以显示 但是需要选择一次方向才能可以!
    崩溃时的错误描述?Supported orientations has no common orientation with the application, and shouldAutorotate is returning YES
    这是因为你修改了工程的全局设置吧?那里相当于总开关,你这种情况,应该把横、竖屏都打开
    这个不是我能控制的,我要做的是要进兼容这种程序!所以我才蛋疼!能自己控制就不会这么难了!
    我好像有印象了
      

  6.   

    7.0以上会崩溃 ,6.0可以显示 但是需要选择一次方向才能可以!
    崩溃时的错误描述?Supported orientations has no common orientation with the application, and shouldAutorotate is returning YES
    这是因为你修改了工程的全局设置吧?那里相当于总开关,你这种情况,应该把横、竖屏都打开
    这个不是我能控制的,我要做的是要进兼容这种程序!所以我才蛋疼!能自己控制就不会这么难了!
    我好像有印象了
    大神,要怎么搞?跪求啊!