原文如下： Before you can use JDataStore, you must enter your development license information. Please note that the JDataStore development license key is separate from any license key you may have for JBuilder 谁有这个key，帮帮我吧
JBuilder 5JBuilder 5 is the most comprehensive set of award-winning, visual development tools for creating Pure Java, platform-independent business applications, applets, servlets, and JavaBeans for the Java 2 platform.System Requirements * Microsoft(R) Windows 98, 2000, or NT 4.0 (Service Pack 3 or higher) * Intel(R) Pentium(R) II 233MHz or compatible (recommended minimum) * 128 MB (recommended minimum) * 256 MB (recommended) * 115-250 MB hard disk space (depending on features installed)Please read these instructions entirely before installing JBuilder 5. 1. Install JBuilder 5. 2. Run JBuilder 5. 3. Run JDataStore 4.Installation of the Borland AppServer is required for Enterprise JavaBeans (EJB) development. * See the instructions in Borland AppServer 4.5 release notes for information on installing and configuring the Borland AppServer. * Make certain that you enter the serial number and license key for Borland AppServer provided in the Installation and Licensing Instructions pamphlet in your JBuilder 5 product box. Otherwise, Borland AppServer will be installed with a 60-day trial license. * When running JBuilder Enterprise for the first time, run Tools|Enterprise Setup in order to enable EJB functionality in JBuilder.For additional information on: * Configuring and using JBuilder 5, please see the Release Notes. * New features available in this version of JBuilder 5, see What's New in JBuilder 5. ------------------------------------------------------------------------Installing JBuilder 5JBuilder 5 contains a version of JDK 1.3 (which includes JPDA). You should use this version instead of any earlier version that you might have.Installation OptionsThe JBuilder 5 installation programs provides these installation options: Installation Installs the following components Full * JBuilder 5 Enterprise Installation Features * Borland AppServer 4.5 Only the components that you select. By default, the Custom following will be installed: Installation * JBuilder 5 Enterprise Features * Borland AppServer 4.5Install JBuilder 5 1. If the installation launcher is not running, double-click on install_windows.exe in the root directory of your JBuilder 5 CD to start it. 2. Select the installation options you want. 3. Click Install to begin installation. 4. If needed, change the default language for JBuilder 5, then click OK. 5. Follow the prompts and click Next. 6. Accept the license agreement when prompted, then click Next. 7. Choose the directory where you want JBuilder 5 installed, then click Next. Do not choose a directory that contains spaces in its name. JBuilder will not run if the name of the directory in which it is installed contains spaces. 8. When the installation program is completed, click Done.Installation Notes * Problems using the main installation launcher If you encounter errors when installing JBuilder 5 using the main installation launcher, you can install each component separately. The sequence of installation is important, so install them in this order: 1. windows\ent_install.exe 2. bas\install\bas\Windows_NT_x86\setup.exe (required for EJB development) * If you encounter problems using the main installation program, an alternate installation is available. Click here for additional information.[return to top of page] ------------------------------------------------------------------------Running JBuilder 5When you run JBuilder 5 for the first time, you will need the serial number and registration key provided with your copy of the product. 1. Start JBuilder 5 by doing one of the following: o Choose Start|Programs|JBuilder 5|JBuilder 5. o From the File Manager: In the bin folder under the folder you installed JBuilder 5 to, double-click on jbuilder.exe. o From the command line: Enter jbuilder5\bin\jbuilder. Note: If you did not install JBuilder 5 to the default directory, then substitute your own path and directory name. 2. When the License Manager appears, enter your name and your company name, then click Add. 3. Enter the serial number and license key from your JBuilder 5 product CD, then click OK. 4. Read and accept the license agreement when prompted, then click OK. 5. When the Register JBuilder 5 dialog appears, select one of the options: o I have an Internet connection Select this option to use your Internet connection to complete the product registration process. 1. Click Next. 2. When the Borland Community Member dialog appears, select one of the options: + I am a Borland Community Member 1. Click Next. 2. Enter either your Borland Community User Name or your e-mail address. 3. Enter your Borland Community Password. + I am not a Member, but I have a Software Registration Account 1. Click Next. 2. Enter either your Software Registration Account User Name or your e-mail address. 3. Enter your Software Registration Account Password. + I am not a Member and I do not have an Account 1. Click Next. 2. Enter a User Name for your Software Registration Account. 3. Enter a Password for your Software Registration Account. 4. Verify the Password for your Software Registration Account by entering it again. 5. Enter your e-mail address. 6. Click Next. 7. Complete the Additional Information. 3. Click Next. 4. If you use a proxy to connect to the Internet, then enter your proxy settings when the Proxy Settings dialog appears. Otherwise, click Next. (If don't know whether you use a proxy or your proxy settings, check with your System Administrator.) 5. When the Information Summary dialog appears, verify that the information to be registered is correct. If the information is correct, click Next. Otherwise, click Back and correct the information before proceeding. 6. Your registration information will now be transmitted and processed. When the message "Registration completed successfully!" is highlighted, click Next. 7. Click Finish. The registration process is completed. o I do not have an Internet connection Select this option if you do not have an Internet connection so you can complete the product registration process by telephone. 1. Click Next. 2. Select your location from the Telephone Number list. 3. Call the Customer Service number for your location. 4. Enter the Activation Key provided by the Customer Service representative. 5. Click Next. 6. Click Finish. The registration process is completed. o I will register later Select this option if you want to complete the product registration process at a later time. 1. Click Next. 2. Click Finish. 6. Click OK to close the License Information dialog. 7. JBuilder 5 is now running. 8. Run Tools|Enterprise Setup in order to enable EJB functionality in JBuilder.[return to top of page] ------------------------------------------------------------------------Running JDataStore 4Before you can use JDataStore, you must enter your license information: 1. Start the JDataStore Explorer in one of the following ways: o From the File Manager: In the bin folder under the folder you installed JBuilder 5 to, double-click on JdsExplorer.exe. o From the command line: Enter jbuilder5\bin\JdsExplorer.exe. Note: If you did not install JBuilder 5 to the default directory, then substitute your own path and directory name. o While running JBuilder 5: Select Tools|JDataStore Explorer: 2. From the JDataStore Explorer menu, select File|License Manager 3. When the License Manager appears, enter your name and your company name, then click Add. 4. Enter the following serial number and license key: Serial Number:xd63-9f5qn-7jpk5 License Key: egs-xcv 5. Click OK. 6. Accept the license agreement when prompted, then click OK. 7. Click OK to exit the License Manager.[return to top of page] ------------------------------------------------------------------------Uninstalling JBuilder 5To uninstall JBuilder 5, do one of the following: * Run the following from the directory where you installed JBuilder 5: UninstallEnterprise\UninstallEnterprise.exe. * Choose Start|Programs|JBuilder 5|Uninstall JBuilder 5 Enterprise. * Choose Settings|Control Panel|Add/Remove programs and select JBuilder 5 Enterprise from the list.[return to top of page]
Before you can use JDataStore, you must enter your development license information. Please note that the JDataStore development license key is separate from any license key you may have for JBuilder
谁有这个key，帮帮我吧
Borland JBuilder 4.0 JDataStore Serial number: xd62-2222y-qpgr? Key: c3t-mdz
我用这JB4的没有问题！
JDataStore的sn:xd63-9f5qn-7jpk5 key:egs-xcv
development tools for creating Pure Java, platform-independent business
applications, applets, servlets, and JavaBeans for the Java 2 platform.System Requirements * Microsoft(R) Windows 98, 2000, or NT 4.0 (Service Pack 3 or higher)
* Intel(R) Pentium(R) II 233MHz or compatible (recommended minimum)
* 128 MB (recommended minimum)
* 256 MB (recommended)
* 115-250 MB hard disk space (depending on features installed)Please read these instructions entirely before installing JBuilder 5. 1. Install JBuilder 5.
2. Run JBuilder 5.
3. Run JDataStore 4.Installation of the Borland AppServer is required for Enterprise JavaBeans
(EJB) development. * See the instructions in Borland AppServer 4.5 release notes for
information on installing and configuring the Borland AppServer.
* Make certain that you enter the serial number and license key for
Borland AppServer provided in the Installation and Licensing
Instructions pamphlet in your JBuilder 5 product box. Otherwise,
Borland AppServer will be installed with a 60-day trial license.
* When running JBuilder Enterprise for the first time, run
Tools|Enterprise Setup in order to enable EJB functionality in
JBuilder.For additional information on: * Configuring and using JBuilder 5, please see the Release Notes.
* New features available in this version of JBuilder 5, see What's New
in JBuilder 5. ------------------------------------------------------------------------Installing JBuilder 5JBuilder 5 contains a version of JDK 1.3 (which includes JPDA). You should
use this version instead of any earlier version that you might have.Installation OptionsThe JBuilder 5 installation programs provides these installation options: Installation Installs the following
components Full * JBuilder 5 Enterprise
Installation Features
* Borland AppServer 4.5 Only the components that you
select. By default, the
Custom following will be installed:
Installation
* JBuilder 5 Enterprise
Features
* Borland AppServer 4.5Install JBuilder 5 1. If the installation launcher is not running, double-click on
install_windows.exe in the root directory of your JBuilder 5 CD to
start it.
2. Select the installation options you want.
3. Click Install to begin installation.
4. If needed, change the default language for JBuilder 5, then click OK.
5. Follow the prompts and click Next.
6. Accept the license agreement when prompted, then click Next.
7. Choose the directory where you want JBuilder 5 installed, then click
Next. Do not choose a directory that contains spaces in its name.
JBuilder will not run if the name of the directory in which it is
installed contains spaces.
8. When the installation program is completed, click Done.Installation Notes * Problems using the main installation launcher
If you encounter errors when installing JBuilder 5 using the main
installation launcher, you can install each component separately. The
sequence of installation is important, so install them in this order:
1. windows\ent_install.exe
2. bas\install\bas\Windows_NT_x86\setup.exe (required for EJB
development) * If you encounter problems using the main installation program, an
alternate installation is available. Click here for additional
information.[return to top of page] ------------------------------------------------------------------------Running JBuilder 5When you run JBuilder 5 for the first time, you will need the serial number
and registration key provided with your copy of the product. 1. Start JBuilder 5 by doing one of the following:
o Choose Start|Programs|JBuilder 5|JBuilder 5.
o From the File Manager: In the bin folder under the folder you
installed JBuilder 5 to, double-click on jbuilder.exe.
o From the command line: Enter jbuilder5\bin\jbuilder. Note: If you did not install JBuilder 5 to the default directory, then
substitute your own path and directory name.
2. When the License Manager appears, enter your name and your company
name, then click Add.
3. Enter the serial number and license key from your JBuilder 5 product
CD, then click OK.
4. Read and accept the license agreement when prompted, then click OK.
5. When the Register JBuilder 5 dialog appears, select one of the
options:
o I have an Internet connection
Select this option to use your Internet connection to complete
the product registration process.
1. Click Next.
2. When the Borland Community Member dialog appears, select one
of the options:
+ I am a Borland Community Member
1. Click Next.
2. Enter either your Borland Community User Name or
your e-mail address.
3. Enter your Borland Community Password.
+ I am not a Member, but I have a Software Registration
Account
1. Click Next.
2. Enter either your Software Registration Account
User Name or your e-mail address.
3. Enter your Software Registration Account Password.
+ I am not a Member and I do not have an Account
1. Click Next.
2. Enter a User Name for your Software Registration
Account.
3. Enter a Password for your Software Registration
Account.
4. Verify the Password for your Software Registration
Account by entering it again.
5. Enter your e-mail address.
6. Click Next.
7. Complete the Additional Information.
3. Click Next.
4. If you use a proxy to connect to the Internet, then enter
your proxy settings when the Proxy Settings dialog appears.
Otherwise, click Next. (If don't know whether you use a
proxy or your proxy settings, check with your System
Administrator.)
5. When the Information Summary dialog appears, verify that the
information to be registered is correct. If the information
is correct, click Next. Otherwise, click Back and correct
the information before proceeding.
6. Your registration information will now be transmitted and
processed. When the message "Registration completed
successfully!" is highlighted, click Next.
7. Click Finish. The registration process is completed.
o I do not have an Internet connection
Select this option if you do not have an Internet connection so
you can complete the product registration process by telephone.
1. Click Next.
2. Select your location from the Telephone Number list.
3. Call the Customer Service number for your location.
4. Enter the Activation Key provided by the Customer Service
representative.
5. Click Next.
6. Click Finish. The registration process is completed.
o I will register later
Select this option if you want to complete the product
registration process at a later time.
1. Click Next.
2. Click Finish.
6. Click OK to close the License Information dialog.
7. JBuilder 5 is now running.
8. Run Tools|Enterprise Setup in order to enable EJB functionality in
JBuilder.[return to top of page] ------------------------------------------------------------------------Running JDataStore 4Before you can use JDataStore, you must enter your license information: 1. Start the JDataStore Explorer in one of the following ways:
o From the File Manager: In the bin folder under the folder you
installed JBuilder 5 to, double-click on JdsExplorer.exe.
o From the command line: Enter jbuilder5\bin\JdsExplorer.exe.
Note: If you did not install JBuilder 5 to the default directory,
then substitute your own path and directory name.
o While running JBuilder 5: Select Tools|JDataStore Explorer:
2. From the JDataStore Explorer menu, select File|License Manager
3. When the License Manager appears, enter your name and your company
name, then click Add.
4. Enter the following serial number and license key:
Serial
Number:xd63-9f5qn-7jpk5
License
Key: egs-xcv
5. Click OK.
6. Accept the license agreement when prompted, then click OK.
7. Click OK to exit the License Manager.[return to top of page] ------------------------------------------------------------------------Uninstalling JBuilder 5To uninstall JBuilder 5, do one of the following: * Run the following from the directory where you installed JBuilder 5:
UninstallEnterprise\UninstallEnterprise.exe.
* Choose Start|Programs|JBuilder 5|Uninstall JBuilder 5 Enterprise.
* Choose Settings|Control Panel|Add/Remove programs and select JBuilder
5 Enterprise from the list.[return to top of page]