表:F1 F2 F3 F4
4 2 1 1
5 2 2 1
6 2 1 1
7 2 2 1
8 2 1 1
9 2 2 1
如何用语句得出:
F1 F2 F3 F4
4 2 1 1
5 2 2 1 就是得出的结果中不允许F3有重复的数据
4 2 1 1
5 2 2 1
6 2 1 1
7 2 2 1
8 2 1 1
9 2 2 1
如何用语句得出:
F1 F2 F3 F4
4 2 1 1
5 2 2 1 就是得出的结果中不允许F3有重复的数据
调试欢乐多
from tb t
where
not exists(select 1 from tb where F3=t.F3 and F1<t.F1)
where not exists( select 1 from tb where f3=a.f3 and f1>a.f1)
select
*
from
tb t
where
not exists(select 1 from tb where F3=t.F3 and F1<t.F1)
/******************************************************************************************************************************************************
1、Num、Name相同的重复值记录,没有大小关系只保留一条
2、Name相同,ID有大小关系时,保留大或小其中一个记录
整理人:中国风(Roy)日期:2008.06.06
******************************************************************************************************************************************************/--1、用于查询重复处理记录(如果列没有大小关系时2000用生成自增列和临时表处理,SQL2005用row_number函数处理)--> --> (Roy)生成測試數據
if not object_id('Tempdb..#T') is null
drop table #T
Go
Create table #T([ID] int,[Name] nvarchar(1),[Memo] nvarchar(2))
Insert #T
select 1,N'A',N'A1' union all
select 2,N'A',N'A2' union all
select 3,N'A',N'A3' union all
select 4,N'B',N'B1' union all
select 5,N'B',N'B2'
Go
--I、Name相同ID最小的记录(推荐用1,2,3),方法3在SQl05时,效率高于1、2
方法1:
Select * from #T a where not exists(select 1 from #T where Name=a.Name and ID<a.ID)方法2:
select a.* from #T a join (select min(ID)ID,Name from #T group by Name) b on a.Name=b.Name and a.ID=b.ID方法3:
select * from #T a where ID=(select min(ID) from #T where Name=a.Name)方法4:
select a.* from #T a join #T b on a.Name=b.Name and a.ID>=b.ID group by a.ID,a.Name,a.Memo having count(1)=1 方法5:
select * from #T a group by ID,Name,Memo having ID=(select min(ID)from #T where Name=a.Name)方法6:
select * from #T a where (select count(1) from #T where Name=a.Name and ID<a.ID)=0方法7:
select * from #T a where ID=(select top 1 ID from #T where Name=a.name order by ID)方法8:
select * from #T a where ID!>all(select ID from #T where Name=a.Name)方法9(注:ID为唯一时可用):
select * from #T a where ID in(select min(ID) from #T group by Name)--SQL2005:方法10:
select ID,Name,Memo from (select *,min(ID)over(partition by Name) as MinID from #T a)T where ID=MinID方法11:select ID,Name,Memo from (select *,row_number()over(partition by Name order by ID) as MinID from #T a)T where MinID=1生成结果:
/*
ID Name Memo
----------- ---- ----
1 A A1
4 B B1(2 行受影响)
*/
from tb t
where
F1 = (select top 1 F1 from tb where F3=t.F3 order by F1)
--(爱新觉罗.毓华(十八年风雨,守得冰山雪莲花开) 2007-10-23于浙江杭州)
/*
数据如下:
name val(成绩) memo(科目)
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3:
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3:
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name,a.val
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name , a.val
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
--七,如果整行数据有重复,所有的列都相同。
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 1 a1--a的第一个值
a 3 a3:a的第三个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--在sql server 2000中只能用一个临时表来解决,生成一个自增列,先对val取最大或最小,然后再通过自增列来取数据。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
goselect * , px = identity(int,1,1) into tmp from tbselect m.name,m.val,m.memo from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) m where px = (select min(px) from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) n where n.name = m.name)drop table tb,tmp/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值(2 行受影响)
*/
--在sql server 2005中可以使用row_number函数,不需要使用临时表。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
goselect m.name,m.val,m.memo from
(
select * , px = row_number() over(order by name , val) from tb
) m where px = (select min(px) from
(
select * , px = row_number() over(order by name , val) from tb
) n where n.name = m.name)drop table tb/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值(2 行受影响)
*/
-->Author:wufeng4552【水族杰纶】
-->Date :2009-08-25 14:36:57
declare @t table([F1] int,[F2] int,[F3] int,[F4] int)
Insert @t
select 4,2,1,1 union all
select 5,2,2,1 union all
select 6,2,1,1 union all
select 7,2,2,1 union all
select 8,2,1,1 union all
select 9,2,2,1
select * from
( select *,cnt=row_number()over (partition by [F3]order by [f1])from @t
)t
where cnt=1
/*
F1 F2 F3 F4 cnt
----------- ----------- ----------- ----------- --------------------
4 2 1 1 1
5 2 2 1 1(2 個資料列受到影響)*/
if object_id('[tb]') is not null drop table [tb]
create table [tb]([F1] int,[F2] int,[F3] int,[F4] int)
insert [tb]
select 4,2,1,1 union all
select 5,2,2,1 union all
select 6,2,1,1 union all
select 7,2,2,1 union all
select 8,2,1,1 union all
select 9,2,2,1select * from [tb] a
where f1 in (select min(f1) from tb group by f3)/*
F1 F2 F3 F4
----------- ----------- ----------- -----------
4 2 1 1
5 2 2 1(2 行受影响)
*/