select a.* from tb a where not exists (select 1 from tb where 字段1 = a.字段1 and 字段2> a.字段2)
SQL code--按某一字段分组取最大(小)值所在行的数据 (爱新觉罗.毓华 2007-10-23于浙江杭州) /* 数据如下: name val memo a 2 a2(a的第二个值) a 1 a1--a的第一个值 a 3 a3:a的第三个值 b 1 b1--b的第一个值 b 3 b3:b的第三个值 b 2 b2b2b2b2 b 4 b4b4 b 5 b5b5b5b5b5 */ --创建表并插入数据: create table tb(name varchar(10),val int,memo varchar(20)) insert into tb values('a', 2, 'a2(a的第二个值)') insert into tb values('a', 1, 'a1--a的第一个值') insert into tb values('a', 3, 'a3:a的第三个值') insert into tb values('b', 1, 'b1--b的第一个值') insert into tb values('b', 3, 'b3:b的第三个值') insert into tb values('b', 2, 'b2b2b2b2') insert into tb values('b', 4, 'b4b4') insert into tb values('b', 5, 'b5b5b5b5b5') go--一、按name分组取val最大的值所在行的数据。 --方法1: select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name --方法2: select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val) --方法3: select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name --方法4: select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name --方法5 select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name /* name val memo ---------- ----------- -------------------- a 3 a3:a的第三个值 b 5 b5b5b5b5b5 */--二、按name分组取val最小的值所在行的数据。 --方法1: select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name --方法2: select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val) --方法3: select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name --方法4: select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name --方法5 select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name /* name val memo ---------- ----------- -------------------- a 1 a1--a的第一个值 b 1 b1--b的第一个值 */--三、按name分组取第一次出现的行所在的数据。 select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name /* name val memo ---------- ----------- -------------------- a 2 a2(a的第二个值) b 1 b1--b的第一个值 */--四、按name分组随机取一条数据。 select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name /* name val memo ---------- ----------- -------------------- a 1 a1--a的第一个值 b 5 b5b5b5b5b5 */--五、按name分组取最小的两个(N个)val select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name /* name val memo ---------- ----------- -------------------- a 1 a1--a的第一个值 a 2 a2(a的第二个值) b 1 b1--b的第一个值 b 2 b2b2b2b2 */--六、按name分组取最大的两个(N个)val select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name /* name val memo ---------- ----------- -------------------- a 2 a2(a的第二个值) a 3 a3:a的第三个值 b 4 b4b4 b 5 b5b5b5b5b5 */ --七,如果整行数据有重复,所有的列都相同。 /* 数据如下: name val memo a 2 a2(a的第二个值) a 1 a1--a的第一个值 a 1 a1--a的第一个值 a 3 a3:a的第三个值 a 3 a3:a的第三个值 b 1 b1--b的第一个值 b 3 b3:b的第三个值 b 2 b2b2b2b2 b 4 b4b4 b 5 b5b5b5b5b5 */ --在sql server 2000中只能用一个临时表来解决,生成一个自增列,先对val取最大或最小,然后再通过自增列来取数据。 --创建表并插入数据: create table tb(name varchar(10),val int,memo varchar(20)) insert into tb values('a', 2, 'a2(a的第二个值)') insert into tb values('a', 1, 'a1--a的第一个值') insert into tb values('a', 1, 'a1--a的第一个值') insert into tb values('a', 3, 'a3:a的第三个值') insert into tb values('a', 3, 'a3:a的第三个值') insert into tb values('b', 1, 'b1--b的第一个值') insert into tb values('b', 3, 'b3:b的第三个值') insert into tb values('b', 2, 'b2b2b2b2') insert into tb values('b', 4, 'b4b4') insert into tb values('b', 5, 'b5b5b5b5b5') goselect * , px = identity(int,1,1) into tmp from tbselect m.name,m.val,m.memo from ( select t.* from tmp t where val = (select min(val) from tmp where name = t.name) ) m where px = (select min(px) from ( select t.* from tmp t where val = (select min(val) from tmp where name = t.name) ) n where n.name = m.name)drop table tb,tmp/* name val memo ---------- ----------- -------------------- a 1 a1--a的第一个值 b 1 b1--b的第一个值(2 行受影响) */ --在sql server 2005中可以使用row_number函数,不需要使用临时表。 --创建表并插入数据: create table tb(name varchar(10),val int,memo varchar(20)) insert into tb values('a', 2, 'a2(a的第二个值)') insert into tb values('a', 1, 'a1--a的第一个值') insert into tb values('a', 1, 'a1--a的第一个值') insert into tb values('a', 3, 'a3:a的第三个值') insert into tb values('a', 3, 'a3:a的第三个值') insert into tb values('b', 1, 'b1--b的第一个值') insert into tb values('b', 3, 'b3:b的第三个值') insert into tb values('b', 2, 'b2b2b2b2') insert into tb values('b', 4, 'b4b4') insert into tb values('b', 5, 'b5b5b5b5b5') goselect m.name,m.val,m.memo from ( select * , px = row_number() over(order by name , val) from tb ) m where px = (select min(px) from ( select * , px = row_number() over(order by name , val) from tb ) n where n.name = m.name)drop table tb/* name val memo ---------- ----------- -------------------- a 1 a1--a的第一个值 b 1 b1--b的第一个值(2 行受影响) */
select a.* from tb a where not exists (select * from tb where 字段1 = a.字段1 and 字段2> a.字段2)
简单的分组取大就可以了。 select 字段1,max(字段2)as 字段2 from 有一表 group by 字段1
select 字段1,max(字段2)as 字段2 from 有一表 group by 字段1
select 字段1,max(字段2)as 字段2 from 有一表 group by 字段1
select a.* from tb a where not exists (select * from tb where 字段1 = a.字段1 and 字段2> a.字段2) 这种我具种好些
declare @sql nvarchar(4000) set @sql=N'中国rm共和,国,中央RENMING政府'while patindex('%[吖-做]%' collate chinese_prc_cs_as_ks_ws,@sql )>=1 select @sql=stuff(@sql,patindex('%[吖-做]%' collate chinese_prc_cs_as_ks_ws,@sql),1,N'') select @sql as 结果 /* 结果 rm,,RENMING */ if OBJECT_ID('tb') is not null drop table tb create table tb(a varchar(10),b int) insert tb select 'A1', 9 union all select 'A1' ,8 union all select 'A1', 8 union all select 'B1', 6 union all select 'B1', 5 union all select 'C1', 8 union all select 'C1', 8 union all select 'C1', 7 select distinct a.* from tb a where not exists(select 1 from tb where a=a.a and b>a.b)
/* a b A1 9 B1 6 C1 8 */select a.a,MAX(a.b) as b from tb a group by a.a /* a b A1 9 B1 6 C1 8 */
not exists
(select 1 from tb where 字段1 = a.字段1
and 字段2> a.字段2)
(爱新觉罗.毓华 2007-10-23于浙江杭州)
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3:
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3:
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
--七,如果整行数据有重复,所有的列都相同。
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 1 a1--a的第一个值
a 3 a3:a的第三个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--在sql server 2000中只能用一个临时表来解决,生成一个自增列,先对val取最大或最小,然后再通过自增列来取数据。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
goselect * , px = identity(int,1,1) into tmp from tbselect m.name,m.val,m.memo from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) m where px = (select min(px) from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) n where n.name = m.name)drop table tb,tmp/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值(2 行受影响)
*/
--在sql server 2005中可以使用row_number函数,不需要使用临时表。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
goselect m.name,m.val,m.memo from
(
select * , px = row_number() over(order by name , val) from tb
) m where px = (select min(px) from
(
select * , px = row_number() over(order by name , val) from tb
) n where n.name = m.name)drop table tb/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值(2 行受影响)
*/
select a.* from tb a where
not exists
(select * from tb where 字段1 = a.字段1
and 字段2> a.字段2)
select 字段1,max(字段2)as 字段2 from 有一表 group by 字段1
select 字段1,max(字段2)as 字段2 from 有一表 group by 字段1
not exists
(select * from tb where 字段1 = a.字段1
and 字段2> a.字段2)
这种我具种好些
set @sql=N'中国rm共和,国,中央RENMING政府'while patindex('%[吖-做]%' collate chinese_prc_cs_as_ks_ws,@sql )>=1
select @sql=stuff(@sql,patindex('%[吖-做]%' collate chinese_prc_cs_as_ks_ws,@sql),1,N'')
select @sql as 结果
/*
结果
rm,,RENMING
*/
if OBJECT_ID('tb') is not null drop table tb
create table tb(a varchar(10),b int)
insert tb
select 'A1', 9
union all select 'A1' ,8
union all select 'A1', 8
union all select 'B1', 6
union all select 'B1', 5
union all select 'C1', 8
union all select 'C1', 8
union all select 'C1', 7 select distinct a.*
from tb a
where not exists(select 1 from tb where a=a.a and b>a.b)
/*
a b
A1 9
B1 6
C1 8
*/select a.a,MAX(a.b) as b from tb a group by a.a
/*
a b
A1 9
B1 6
C1 8
*/