楼主先直接在sql2005中测试,该存储过程还返回查询用时; 例如:有表名为patent,字段有Patent_id,country_id等,在sql2005中测试语句为: declare @a int declare @b int exec Pg_Paging1 'patent','*','patent_id desc,country_id desc','',10,1,@a output,@b output select @a,@b @a--返回总记录数 @b--返回查询用时,单位豪秒 存储过程代码 CREATE PROCEDURE [dbo].[Pg_Paging1] ( @TableName varchar(50), --表名 @ReFieldsStr varchar(500) = '*', --字段名(全部字段为*) @OrderString varchar(200), --排序字段支持多字段不用加order by)((必须要有该项) @WhereString varchar(MAX) =N'', --条件语句(不用加where) @PageSize int, --每页多少条记录 @PageIndex int = 1 , --指定当前为第几页 @TotalRecord int output, --返回总记录数 @SearchTime decimal(18,4) output --返回用时 ) AS BEGIN --处理开始点和结束点 Declare @StartRecord int; Declare @EndRecord int; Declare @TotalCountSql nvarchar(500); Declare @SqlString nvarchar(MAX); set @StartRecord = (@PageIndex-1)*@PageSize + 1; set @EndRecord = @StartRecord + @PageSize - 1 ; SET @TotalCountSql= N'select @TotalRecord = count(*) from ' + @TableName;--总记录数语句 SET @SqlString = N'(select row_number() over (order by '+ @OrderString +') as rowId,'+@ReFieldsStr+' from '+ @TableName;--查询语句 -- IF (@WhereString! = '' or @WhereString!=null) BEGIN SET @TotalCountSql=@TotalCountSql + ' with(nolock) where '+ @WhereString; SET @SqlString =@SqlString+ ' with(nolock) where '+ @WhereString; END declare @d datetime set @d=getdate() --第一次执行得到 --IF(@TotalRecord is null) -- BEGIN EXEC sp_executesql @totalCountSql,N'@TotalRecord int out',@TotalRecord output;--返回总记录数 -- END ----执行主语句 set @SqlString ='select * from ' + @SqlString + ') as t where rowId between ' + ltrim(str(@StartRecord)) + ' and ' + ltrim(str(@EndRecord)); Exec(@SqlString) set @SearchTime = datediff(ms,@d,getdate()) END
/*--用存储过程实现的分页程序 显示指定表、视图、查询结果的第X页 对于表中主键或标识列的情况,直接从原表取数查询,其它情况使用临时表的方法 如果视图或查询结果中有主键,不推荐此方法--邹建 2003.09(引用请保留此信息)--*//*--调用示例 exec p_show '地区资料' exec p_show '地区资料',5,3,'地区编号,地区名称,助记码','地区编号' --*/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[p_show]') and OBJECTPROPERTY(id, N'IsProcedure') = 1) drop procedure [dbo].[p_show] GOCREATE Proc p_show @QueryStr nvarchar(4000), --表名、视图名、查询语句 @PageSize int=10, --每页的大小(行数) @PageCurrent int=1, --要显示的页 @FdShow nvarchar (4000)='',--要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段 @FdOrder nvarchar (1000)='' --排序字段列表 as declare @FdName nvarchar(250) --表中的主键或表、临时表中的标识列名 ,@Id1 varchar(20),@Id2 varchar(20) --开始和结束的记录号 ,@Obj_ID int --对象ID --表中有复合主键的处理 declare @strfd nvarchar(2000) --复合主键列表 ,@strjoin nvarchar(4000) --连接字段 ,@strwhere nvarchar(2000) --查询条件 select @Obj_ID=object_id(@QueryStr) ,@FdShow=case isnull(@FdShow,'') when '' then ' *' else ' '+@FdShow end ,@FdOrder=case isnull(@FdOrder,'') when '' then '' else ' order by '+@FdOrder end ,@QueryStr=case when @Obj_ID is not null then ' '+@QueryStr else ' ('+@QueryStr+') a' end--如果显示第一页,可以直接用top来完成 if @PageCurrent=1 begin select @Id1=cast(@PageSize as varchar(20)) exec('select top '+@Id1+@FdShow+' from '+@QueryStr+@FdOrder) return end--如果是表,则检查表中是否有标识更或主键 if @Obj_ID is not null and objectproperty(@Obj_ID,'IsTable')=1 begin select @Id1=cast(@PageSize as varchar(20)) ,@Id2=cast((@PageCurrent-1)*@PageSize as varchar(20)) select @FdName=name from syscolumns where id=@Obj_ID and status=0x80 if @@rowcount=0 --如果表中无标识列,则检查表中是否有主键 begin if not exists(select 1 from sysobjects where parent_obj=@Obj_ID and xtype='PK') goto lbusetemp --如果表中无主键,则用临时表处理 select @FdName=name from syscolumns where id=@Obj_ID and colid in( select colid from sysindexkeys where @Obj_ID=id and indid in( select indid from sysindexes where @Obj_ID=id and name in( select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID ))) if @@rowcount>1 --检查表中的主键是否为复合主键 begin select @strfd='',@strjoin='',@strwhere='' select @strfd=@strfd+',['+name+']' ,@strjoin=@strjoin+' and a.['+name+']=b.['+name+']' ,@strwhere=@strwhere+' and b.['+name+'] is null' from syscolumns where id=@Obj_ID and colid in( select colid from sysindexkeys where @Obj_ID=id and indid in( select indid from sysindexes where @Obj_ID=id and name in( select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID ))) select @strfd=substring(@strfd,2,2000) ,@strjoin=substring(@strjoin,5,4000) ,@strwhere=substring(@strwhere,5,4000) goto lbusepk end end end else goto lbusetemp/*--使用标识列或主键为单一字段的处理方法--*/ lbuseidentity: exec('select top '+@Id1+@FdShow+' from '+@QueryStr +' where '+@FdName+' not in(select top ' +@Id2+' '+@FdName+' from '+@QueryStr+@FdOrder +')'+@FdOrder ) return/*--表中有复合主键的处理方法--*/ lbusepk: exec('select '+@FdShow+' from(select top '+@Id1+' a.* from (select top 100 percent * from '+@QueryStr+@FdOrder+') a left join (select top '+@Id2+' '+@strfd+' from '+@QueryStr+@FdOrder+') b on '+@strjoin+' where '+@strwhere+') a' ) return/*--用临时表处理的方法--*/ lbusetemp: select @FdName='[ID_'+cast(newid() as varchar(40))+']' ,@Id1=cast(@PageSize*(@PageCurrent-1) as varchar(20)) ,@Id2=cast(@PageSize*@PageCurrent-1 as varchar(20))exec('select '+@FdName+'=identity(int,0,1),'+@FdShow+' into #tb from'+@QueryStr+@FdOrder+' select '+@FdShow+' from #tb where '+@FdName+' between ' +@Id1+' and '+@Id2 ) GO本文来自CSDN博客,转载请标明出处:http://blog.csdn.net/fredrickhu/archive/2009/09/18/4566261.aspx
例如:有表名为patent,字段有Patent_id,country_id等,在sql2005中测试语句为: declare @a int
declare @b int
exec Pg_Paging1 'patent','*','patent_id desc,country_id desc','',10,1,@a output,@b output
select @a,@b @a--返回总记录数
@b--返回查询用时,单位豪秒 存储过程代码
CREATE PROCEDURE [dbo].[Pg_Paging1]
(
@TableName varchar(50), --表名
@ReFieldsStr varchar(500) = '*', --字段名(全部字段为*)
@OrderString varchar(200), --排序字段支持多字段不用加order by)((必须要有该项)
@WhereString varchar(MAX) =N'', --条件语句(不用加where)
@PageSize int, --每页多少条记录
@PageIndex int = 1 , --指定当前为第几页
@TotalRecord int output, --返回总记录数
@SearchTime decimal(18,4) output --返回用时
)
AS
BEGIN --处理开始点和结束点
Declare @StartRecord int;
Declare @EndRecord int;
Declare @TotalCountSql nvarchar(500);
Declare @SqlString nvarchar(MAX);
set @StartRecord = (@PageIndex-1)*@PageSize + 1;
set @EndRecord = @StartRecord + @PageSize - 1 ;
SET @TotalCountSql= N'select @TotalRecord = count(*) from ' + @TableName;--总记录数语句
SET @SqlString = N'(select row_number() over (order by '+ @OrderString +') as rowId,'+@ReFieldsStr+' from '+ @TableName;--查询语句
--
IF (@WhereString! = '' or @WhereString!=null)
BEGIN
SET @TotalCountSql=@TotalCountSql + ' with(nolock) where '+ @WhereString;
SET @SqlString =@SqlString+ ' with(nolock) where '+ @WhereString;
END declare @d datetime
set @d=getdate()
--第一次执行得到
--IF(@TotalRecord is null)
-- BEGIN
EXEC sp_executesql @totalCountSql,N'@TotalRecord int out',@TotalRecord output;--返回总记录数
-- END
----执行主语句
set @SqlString ='select * from ' + @SqlString + ') as t where rowId between ' + ltrim(str(@StartRecord)) + ' and ' + ltrim(str(@EndRecord));
Exec(@SqlString) set @SearchTime = datediff(ms,@d,getdate())
END
显示指定表、视图、查询结果的第X页
对于表中主键或标识列的情况,直接从原表取数查询,其它情况使用临时表的方法
如果视图或查询结果中有主键,不推荐此方法--邹建 2003.09(引用请保留此信息)--*//*--调用示例
exec p_show '地区资料' exec p_show '地区资料',5,3,'地区编号,地区名称,助记码','地区编号'
--*/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[p_show]')
and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[p_show]
GOCREATE Proc p_show
@QueryStr nvarchar(4000), --表名、视图名、查询语句
@PageSize int=10, --每页的大小(行数)
@PageCurrent int=1, --要显示的页
@FdShow nvarchar (4000)='',--要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段
@FdOrder nvarchar (1000)='' --排序字段列表
as
declare @FdName nvarchar(250) --表中的主键或表、临时表中的标识列名
,@Id1 varchar(20),@Id2 varchar(20) --开始和结束的记录号
,@Obj_ID int --对象ID
--表中有复合主键的处理
declare @strfd nvarchar(2000) --复合主键列表
,@strjoin nvarchar(4000) --连接字段
,@strwhere nvarchar(2000) --查询条件
select @Obj_ID=object_id(@QueryStr)
,@FdShow=case isnull(@FdShow,'') when '' then ' *' else ' '+@FdShow end
,@FdOrder=case isnull(@FdOrder,'') when '' then '' else ' order by '+@FdOrder end
,@QueryStr=case when @Obj_ID is not null then ' '+@QueryStr else ' ('+@QueryStr+') a' end--如果显示第一页,可以直接用top来完成
if @PageCurrent=1
begin
select @Id1=cast(@PageSize as varchar(20))
exec('select top '+@Id1+@FdShow+' from '+@QueryStr+@FdOrder)
return
end--如果是表,则检查表中是否有标识更或主键
if @Obj_ID is not null and objectproperty(@Obj_ID,'IsTable')=1
begin
select @Id1=cast(@PageSize as varchar(20))
,@Id2=cast((@PageCurrent-1)*@PageSize as varchar(20)) select @FdName=name from syscolumns where id=@Obj_ID and status=0x80
if @@rowcount=0 --如果表中无标识列,则检查表中是否有主键
begin
if not exists(select 1 from sysobjects where parent_obj=@Obj_ID and xtype='PK')
goto lbusetemp --如果表中无主键,则用临时表处理 select @FdName=name from syscolumns where id=@Obj_ID and colid in(
select colid from sysindexkeys where @Obj_ID=id and indid in(
select indid from sysindexes where @Obj_ID=id and name in(
select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID
)))
if @@rowcount>1 --检查表中的主键是否为复合主键
begin
select @strfd='',@strjoin='',@strwhere=''
select @strfd=@strfd+',['+name+']'
,@strjoin=@strjoin+' and a.['+name+']=b.['+name+']'
,@strwhere=@strwhere+' and b.['+name+'] is null'
from syscolumns where id=@Obj_ID and colid in(
select colid from sysindexkeys where @Obj_ID=id and indid in(
select indid from sysindexes where @Obj_ID=id and name in(
select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID
)))
select @strfd=substring(@strfd,2,2000)
,@strjoin=substring(@strjoin,5,4000)
,@strwhere=substring(@strwhere,5,4000)
goto lbusepk
end
end
end
else
goto lbusetemp/*--使用标识列或主键为单一字段的处理方法--*/
lbuseidentity:
exec('select top '+@Id1+@FdShow+' from '+@QueryStr
+' where '+@FdName+' not in(select top '
+@Id2+' '+@FdName+' from '+@QueryStr+@FdOrder
+')'+@FdOrder
)
return/*--表中有复合主键的处理方法--*/
lbusepk:
exec('select '+@FdShow+' from(select top '+@Id1+' a.* from
(select top 100 percent * from '+@QueryStr+@FdOrder+') a
left join (select top '+@Id2+' '+@strfd+'
from '+@QueryStr+@FdOrder+') b on '+@strjoin+'
where '+@strwhere+') a'
)
return/*--用临时表处理的方法--*/
lbusetemp:
select @FdName='[ID_'+cast(newid() as varchar(40))+']'
,@Id1=cast(@PageSize*(@PageCurrent-1) as varchar(20))
,@Id2=cast(@PageSize*@PageCurrent-1 as varchar(20))exec('select '+@FdName+'=identity(int,0,1),'+@FdShow+'
into #tb from'+@QueryStr+@FdOrder+'
select '+@FdShow+' from #tb where '+@FdName+' between '
+@Id1+' and '+@Id2
)
GO本文来自CSDN博客,转载请标明出处:http://blog.csdn.net/fredrickhu/archive/2009/09/18/4566261.aspx