Alter table tablename add id IDENTITY(int, 1,1) selete * from tablename where id>=100 and id<=200
Alter table tablename add id IDENTITY(int, 1,1) selete * from tablename where id>=100 and id<=200 Alter table tablename add id IDENTITY(int, 1,1) selete * from tablename where id between 100 and 200 哪个效率高啊
select IDENTITY(int,1,1) as ID, a.* into #tableName from tableName aselect col1,col2,col3,col4,.... from #tableName where id>=100 and id<=200 go用临时表比较好。
最基本的处理方法:如果表中有主键(记录不重复的字段也可以),可以用类似下面的方法,当然x,y要换成具体的数字,不能用变量:select top y * from 表 where 主键 not in(select top (x-1)*y 主键 from 表)如果表中无主键,可以用临时表,加标识字段解决.这里的x,y可以用变量.select id=identity(int,1,1),* into #tb from 表 select * from #tb where id between (x-1)*y and x*y-1
--完善一点的,用存储过程实现的通用过程./*--用存储过程实现的分页程序 显示指定查询结果的第X页 此存储过程针对无主键的情况,使用临时表的方法 如果有主键,不推荐此方法--邹建 2003.09--*//*--调用示例 exec p_show 'select * from xzkh_new..地区资料' exec p_show 'select * from xzkh_new..地区资料',5,2,'地区编号,地区名称,助记码','地区编号' --*/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[p_show]') and OBJECTPROPERTY(id, N'IsProcedure') = 1) drop procedure [dbo].[p_show] GOCREATE Proc p_show @QueryStr nvarchar(1000), --查询语句,如果查询表,用:select * from 表 @PageSize int=10, --每页的大小(行数) @PageCurrent int=1, --要显示的页 @FdShow nvarchar (1000)='', --要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段 @FdOrder nvarchar (1000)='' --排序字段列表 as declare @FdName nvarchar(50) --标识列名 ,@Id1 varchar(20),@Id2 varchar(20) --开始和结束的记录号 select @FdName='[ID_'+cast(newid() as varchar(40))+']' ,@Id1=cast(@PageSize*(@PageCurrent-1) as varchar(20)) ,@Id2=cast(@PageSize*@PageCurrent-1 as varchar(20)) ,@FdShow=case isnull(@FdShow,'') when '' then '*' else @FdShow end ,@FdOrder=case isnull(@FdOrder,'') when '' then '' else ' order by '+@FdOrder endexec('select '+@FdName+'=identity(int,0,1),'+@FdShow+' into #tb from('+@QueryStr+') a '+@FdOrder+' select '+@FdShow+' from #tb where '+@FdName+' between ' +@Id1+' and '+@Id2 ) GO
--上面的只适用于SQL查询,不适用于表,视图(要写成 select * from 表 的形式),下面更完善也更复杂. /*--用存储过程实现的分页程序 显示指定表、视图、查询结果的第X页 对于表中主键或标识列的情况,直接从原表取数查询,其它情况使用临时表的方法 如果视图或查询结果中有主键,不推荐此方法--邹建 2003.09--*//*--调用示例 exec p_show '地区资料' exec p_show '地区资料',5,3,'地区编号,地区名称,助记码','地区编号' --*/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[p_show]') and OBJECTPROPERTY(id, N'IsProcedure') = 1) drop procedure [dbo].[p_show] GOCREATE Proc p_show @QueryStr nvarchar(4000), --表名、视图名、查询语句 @PageSize int=10, --每页的大小(行数) @PageCurrent int=1, --要显示的页 @FdShow nvarchar (4000)='', --要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段 @FdOrder nvarchar (1000)='' --排序字段列表 as declare @FdName nvarchar(250) --表中的主键或表、临时表中的标识列名 ,@Id1 varchar(20),@Id2 varchar(20) --开始和结束的记录号 ,@Obj_ID int --对象ID --表中有复合主键的处理 declare @strfd nvarchar(2000) --复合主键列表 ,@strjoin nvarchar(4000) --连接字段 ,@strwhere nvarchar(2000) --查询条件 select @Obj_ID=object_id(@QueryStr) ,@FdShow=case isnull(@FdShow,'') when '' then ' *' else ' '+@FdShow end ,@FdOrder=case isnull(@FdOrder,'') when '' then '' else ' order by '+@FdOrder end ,@QueryStr=case when @Obj_ID is not null then ' '+@QueryStr else ' ('+@QueryStr+') a' end--如果显示第一页,可以直接用top来完成 if @PageCurrent=1 begin select @Id1=cast(@PageSize as varchar(20)) exec('select top '+@Id1+@FdShow+' from '+@QueryStr+@FdOrder) return end--如果是表,则检查表中是否有标识更或主键 if @Obj_ID is not null and objectproperty(@Obj_ID,'IsTable')=1 begin select @Id1=cast(@PageSize as varchar(20)) ,@Id2=cast((@PageCurrent-1)*@PageSize as varchar(20)) select @FdName=name from syscolumns where id=@Obj_ID and status=0x80 if @@rowcount=0 --如果表中无标识列,则检查表中是否有主键 begin if not exists(select 1 from sysobjects where parent_obj=@Obj_ID and xtype='PK') goto lbusetemp --如果表中无主键,则用临时表处理 select @FdName=name from syscolumns where id=@Obj_ID and colid in( select colid from sysindexkeys where @Obj_ID=id and indid in( select indid from sysindexes where @Obj_ID=id and name in( select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID ))) if @@rowcount>1 --检查表中的主键是否为复合主键 begin select @strfd='',@strjoin='',@strwhere='' select @strfd=@strfd+',['+name+']' ,@strjoin=@strjoin+' and a.['+name+']=b.['+name+']' ,@strwhere=@strwhere+' and b.['+name+'] is null' from syscolumns where id=@Obj_ID and colid in( select colid from sysindexkeys where @Obj_ID=id and indid in( select indid from sysindexes where @Obj_ID=id and name in( select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID ))) select @strfd=substring(@strfd,2,2000) ,@strjoin=substring(@strjoin,5,4000) ,@strwhere=substring(@strwhere,5,4000) goto lbusepk end end end else goto lbusetemp/*--使用标识列或主键为单一字段的处理方法--*/ lbuseidentity: exec('select top '+@Id1+@FdShow+' from '+@QueryStr +' where '+@FdName+' not in(select top ' +@Id2+' '+@FdName+' from '+@QueryStr+@FdOrder +')'+@FdOrder ) return/*--表中有复合主键的处理方法--*/ lbusepk: exec('select '+@FdShow+' from(select top '+@Id1+' a.* from (select top 100 percent * from '+@QueryStr+@FdOrder+') a left join (select top '+@Id2+' '+@strfd+' from '+@QueryStr+@FdOrder+') b on '+@strjoin+' where '+@strwhere+') a' ) return/*--用临时表处理的方法--*/ lbusetemp: select @FdName='[ID_'+cast(newid() as varchar(40))+']' ,@Id1=cast(@PageSize*(@PageCurrent-1) as varchar(20)) ,@Id2=cast(@PageSize*@PageCurrent-1 as varchar(20))exec('select '+@FdName+'=identity(int,0,1),'+@FdShow+' into #tb from'+@QueryStr+@FdOrder+' select '+@FdShow+' from #tb where '+@FdName+' between ' +@Id1+' and '+@Id2 )GO
谢谢上面的回复 我的表里有一个字增长字段 但是根据查询条件所得 此字段并不是连续的 而且过期的记录也常常被删除 “select top y * from 表 where 主键 not in(select top (x-1)*y 主键 from 表)” 我现在用的就是这种方法 感觉效率不高 我的表里有几十万条记录 我的查询条件的字段都没有索引 可能这也是原因 后面这存储过程的方法看起来就更复杂了 据说mysql里只是用limit 100 200好像就可以了 看来现在我是没什么简单的办法用了
selete * from tablename where id>=100 and id<=200
selete * from tablename where id>=100 and id<=200
Alter table tablename add id IDENTITY(int, 1,1)
selete * from tablename where id between 100 and 200
哪个效率高啊
a.* into #tableName from tableName aselect col1,col2,col3,col4,.... from #tableName where id>=100 and id<=200
go用临时表比较好。
最基本的处理方法:如果表中有主键(记录不重复的字段也可以),可以用类似下面的方法,当然x,y要换成具体的数字,不能用变量:select top y * from 表 where 主键 not in(select top (x-1)*y 主键 from 表)如果表中无主键,可以用临时表,加标识字段解决.这里的x,y可以用变量.select id=identity(int,1,1),* into #tb from 表
select * from #tb where id between (x-1)*y and x*y-1
--完善一点的,用存储过程实现的通用过程./*--用存储过程实现的分页程序 显示指定查询结果的第X页
此存储过程针对无主键的情况,使用临时表的方法
如果有主键,不推荐此方法--邹建 2003.09--*//*--调用示例
exec p_show 'select * from xzkh_new..地区资料' exec p_show 'select * from xzkh_new..地区资料',5,2,'地区编号,地区名称,助记码','地区编号'
--*/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[p_show]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[p_show]
GOCREATE Proc p_show
@QueryStr nvarchar(1000), --查询语句,如果查询表,用:select * from 表
@PageSize int=10, --每页的大小(行数)
@PageCurrent int=1, --要显示的页
@FdShow nvarchar (1000)='', --要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段
@FdOrder nvarchar (1000)='' --排序字段列表
as
declare @FdName nvarchar(50) --标识列名
,@Id1 varchar(20),@Id2 varchar(20) --开始和结束的记录号
select @FdName='[ID_'+cast(newid() as varchar(40))+']'
,@Id1=cast(@PageSize*(@PageCurrent-1) as varchar(20))
,@Id2=cast(@PageSize*@PageCurrent-1 as varchar(20))
,@FdShow=case isnull(@FdShow,'') when '' then '*' else @FdShow end
,@FdOrder=case isnull(@FdOrder,'') when '' then '' else ' order by '+@FdOrder endexec('select '+@FdName+'=identity(int,0,1),'+@FdShow+'
into #tb from('+@QueryStr+') a '+@FdOrder+'
select '+@FdShow+' from #tb where '+@FdName+' between '
+@Id1+' and '+@Id2
)
GO
--上面的只适用于SQL查询,不适用于表,视图(要写成 select * from 表 的形式),下面更完善也更复杂.
/*--用存储过程实现的分页程序 显示指定表、视图、查询结果的第X页
对于表中主键或标识列的情况,直接从原表取数查询,其它情况使用临时表的方法
如果视图或查询结果中有主键,不推荐此方法--邹建 2003.09--*//*--调用示例
exec p_show '地区资料' exec p_show '地区资料',5,3,'地区编号,地区名称,助记码','地区编号'
--*/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[p_show]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[p_show]
GOCREATE Proc p_show
@QueryStr nvarchar(4000), --表名、视图名、查询语句
@PageSize int=10, --每页的大小(行数)
@PageCurrent int=1, --要显示的页
@FdShow nvarchar (4000)='', --要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段
@FdOrder nvarchar (1000)='' --排序字段列表
as
declare @FdName nvarchar(250) --表中的主键或表、临时表中的标识列名
,@Id1 varchar(20),@Id2 varchar(20) --开始和结束的记录号
,@Obj_ID int --对象ID
--表中有复合主键的处理
declare @strfd nvarchar(2000) --复合主键列表
,@strjoin nvarchar(4000) --连接字段
,@strwhere nvarchar(2000) --查询条件
select @Obj_ID=object_id(@QueryStr)
,@FdShow=case isnull(@FdShow,'') when '' then ' *' else ' '+@FdShow end
,@FdOrder=case isnull(@FdOrder,'') when '' then '' else ' order by '+@FdOrder end
,@QueryStr=case when @Obj_ID is not null then ' '+@QueryStr else ' ('+@QueryStr+') a' end--如果显示第一页,可以直接用top来完成
if @PageCurrent=1
begin
select @Id1=cast(@PageSize as varchar(20))
exec('select top '+@Id1+@FdShow+' from '+@QueryStr+@FdOrder)
return
end--如果是表,则检查表中是否有标识更或主键
if @Obj_ID is not null and objectproperty(@Obj_ID,'IsTable')=1
begin
select @Id1=cast(@PageSize as varchar(20))
,@Id2=cast((@PageCurrent-1)*@PageSize as varchar(20)) select @FdName=name from syscolumns where id=@Obj_ID and status=0x80
if @@rowcount=0 --如果表中无标识列,则检查表中是否有主键
begin
if not exists(select 1 from sysobjects where parent_obj=@Obj_ID and xtype='PK')
goto lbusetemp --如果表中无主键,则用临时表处理 select @FdName=name from syscolumns where id=@Obj_ID and colid in(
select colid from sysindexkeys where @Obj_ID=id and indid in(
select indid from sysindexes where @Obj_ID=id and name in(
select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID
)))
if @@rowcount>1 --检查表中的主键是否为复合主键
begin
select @strfd='',@strjoin='',@strwhere=''
select @strfd=@strfd+',['+name+']'
,@strjoin=@strjoin+' and a.['+name+']=b.['+name+']'
,@strwhere=@strwhere+' and b.['+name+'] is null'
from syscolumns where id=@Obj_ID and colid in(
select colid from sysindexkeys where @Obj_ID=id and indid in(
select indid from sysindexes where @Obj_ID=id and name in(
select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID
)))
select @strfd=substring(@strfd,2,2000)
,@strjoin=substring(@strjoin,5,4000)
,@strwhere=substring(@strwhere,5,4000)
goto lbusepk
end
end
end
else
goto lbusetemp/*--使用标识列或主键为单一字段的处理方法--*/
lbuseidentity:
exec('select top '+@Id1+@FdShow+' from '+@QueryStr
+' where '+@FdName+' not in(select top '
+@Id2+' '+@FdName+' from '+@QueryStr+@FdOrder
+')'+@FdOrder
)
return/*--表中有复合主键的处理方法--*/
lbusepk:
exec('select '+@FdShow+' from(select top '+@Id1+' a.* from
(select top 100 percent * from '+@QueryStr+@FdOrder+') a
left join (select top '+@Id2+' '+@strfd+'
from '+@QueryStr+@FdOrder+') b on '+@strjoin+'
where '+@strwhere+') a'
)
return/*--用临时表处理的方法--*/
lbusetemp:
select @FdName='[ID_'+cast(newid() as varchar(40))+']'
,@Id1=cast(@PageSize*(@PageCurrent-1) as varchar(20))
,@Id2=cast(@PageSize*@PageCurrent-1 as varchar(20))exec('select '+@FdName+'=identity(int,0,1),'+@FdShow+'
into #tb from'+@QueryStr+@FdOrder+'
select '+@FdShow+' from #tb where '+@FdName+' between '
+@Id1+' and '+@Id2
)GO
查询第X页,每页Y条记录
http://expert.csdn.net/Expert/topic/2365/2365596.xml?temp=.9632074
“select top y * from 表 where 主键 not in(select top (x-1)*y 主键 from 表)”
我现在用的就是这种方法 感觉效率不高
我的表里有几十万条记录 我的查询条件的字段都没有索引 可能这也是原因
后面这存储过程的方法看起来就更复杂了
据说mysql里只是用limit 100 200好像就可以了 看来现在我是没什么简单的办法用了