--按某一字段分组取最大(小)值所在行的数据(2007-10-23于浙江杭州)
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3:
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3:
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3:
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3:
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
解决方案 »
- SQL2005问题:将截断字符串或二进制数据,急等解决
- 两个表关联的问题
- SQL数据更新问题。
- 特别急-MSSQL2005 数据库不能启动问题-牛人过来
- 請問下在SQL數據庫中如何把一個字段串字段當作時間來查詢
- 数据库中表都清空了,为什么还有500M那么大??
- 多次查询group by的问题,或者建立临时表?
- 数据库中有近2000个表,有一个非常重要的字段(如:物料编码)它可能存在许多表中,并有许多关联,如何把数据库中所有表中的这个字段都增
- 在不安装sql server客户端的情况下,在vc中使用ado联接sql server数据库
- mysql2005按年月分组
- SQL 2005 转换到 SQL 2000 求助
- 求一条数据匹配的SQL语句
from table a
where not exists(select 1 from table where class = a.class and id > a.id)
要把属于同一类(class)里质量(quality)最高的的id号查出来,大约几百类 select * from 表名 t where not exists(
select 1 from 表名 where class=t.class and id>t.id
)
/******************************************************************************************************************************************************
Name相同ID最小或最大的记录整理人:中国风(Roy)日期:2008.06.06
******************************************************************************************************************************************************/--> --> (Roy)生成測試數據
if not object_id('Tempdb..#T') is null
drop table #T
Go
Create table #T([ID] int,[Name] nvarchar(1),[Memo] nvarchar(2))
Insert #T
select 1,N'A',N'A1' union all
select 2,N'A',N'A2' union all
select 3,N'A',N'A3' union all
select 4,N'B',N'B1' union all
select 5,N'B',N'B2'
Go
--1、Name相同ID最小的记录(推荐用1,2,3),方法3在SQl05时,效率高于1、2
方法1:
Select * from #T a where not exists(select 1 from #T where Name=a.Name and ID<a.ID)方法2:
select a.* from #T a join (select min(ID)ID,Name from #T group by Name) b on a.Name=b.Name and a.ID=b.ID方法3:
select * from #T a where ID=(select min(ID) from #T where Name=a.Name)方法4:
select a.* from #T a join #T b on a.Name=b.Name and a.ID>=b.ID group by a.ID,a.Name,a.Memo having count(1)=1 方法5:
select * from #T a group by ID,Name,Memo having ID=(select min(ID)from #T where Name=a.Name)方法6:
select * from #T a where (select count(1) from #T where Name=a.Name and ID<a.ID)=0方法7:
select * from #T a where ID=(select top 1 ID from #T where Name=a.name order by ID)方法8:
select * from #T a where ID!>all(select ID from #T where Name=a.Name)方法9:
select * from #T a where ID in(select min(ID) from #T group by Name)--SQL2005:方法10:
select ID,Name,Memo from (select *,min(ID)over(partition by Name) as MinID from #T a)T where ID=MinID
生成结果:
/*
ID Name Memo
----------- ---- ----
1 A A1
4 B B1(2 行受影响)
*/
--2、Name相同ID最大的记录,与min相反:
方法1:
Select * from #T a where not exists(select 1 from #T where Name=a.Name and ID>a.ID)方法2:
select a.* from #T a join (select max(ID)ID,Name from #T group by Name) b on a.Name=b.Name and a.ID=b.ID order by ID方法3:
select * from #T a where ID=(select max(ID) from #T where Name=a.Name) order by ID方法4:
select a.* from #T a join #T b on a.Name=b.Name and a.ID<=b.ID group by a.ID,a.Name,a.Memo having count(1)=1 方法5:
select * from #T a group by ID,Name,Memo having ID=(select max(ID)from #T where Name=a.Name)方法6:
select * from #T a where (select count(1) from #T where Name=a.Name and ID>a.ID)=0方法7:
select * from #T a where ID=(select top 1 ID from #T where Name=a.name order by ID desc)方法8:
select * from #T a where ID!<all(select ID from #T where Name=a.Name)方法9:
select * from #T a where ID in(select max(ID) from #T group by Name)--SQL2005:方法10:
select ID,Name,Memo from (select *,max(ID)over(partition by Name) as MinID from #T a)T where ID=MinID生成结果2:
/*
ID Name Memo
----------- ---- ----
3 A A3
5 B B2(2 行受影响)
*/
where a.class=b.class and a.quality=b.quality
分数比较少,就只好给第一个回复的wzy_love_sly了
谢谢各位!