--按某一字段分组取最大(小)值所在行的数据
(爱新觉罗.毓华 2007-10-23于浙江杭州)
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3:
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3:
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
--七,如果整行数据有重复,所有的列都相同。
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 1 a1--a的第一个值
a 3 a3:a的第三个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--在sql server 2000中只能用一个临时表来解决,生成一个自增列,先对val取最大或最小,然后再通过自增列来取数据。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
goselect * , px = identity(int,1,1) into tmp from tbselect m.name,m.val,m.memo from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) m where px = (select min(px) from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) n where n.name = m.name)drop table tb,tmp/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值(2 行受影响)
*/
--在sql server 2005中可以使用row_number函数,不需要使用临时表。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
goselect m.name,m.val,m.memo from
(
select * , px = row_number() over(order by name , val) from tb
) m where px = (select min(px) from
(
select * , px = row_number() over(order by name , val) from tb
) n where n.name = m.name)drop table tb/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值(2 行受影响)
*/
(爱新觉罗.毓华 2007-10-23于浙江杭州)
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3:
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3:
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
--七,如果整行数据有重复,所有的列都相同。
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 1 a1--a的第一个值
a 3 a3:a的第三个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--在sql server 2000中只能用一个临时表来解决,生成一个自增列,先对val取最大或最小,然后再通过自增列来取数据。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
goselect * , px = identity(int,1,1) into tmp from tbselect m.name,m.val,m.memo from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) m where px = (select min(px) from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) n where n.name = m.name)drop table tb,tmp/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值(2 行受影响)
*/
--在sql server 2005中可以使用row_number函数,不需要使用临时表。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
goselect m.name,m.val,m.memo from
(
select * , px = row_number() over(order by name , val) from tb
) m where px = (select min(px) from
(
select * , px = row_number() over(order by name , val) from tb
) n where n.name = m.name)drop table tb/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值(2 行受影响)
*/
(
id int identity(1,1),
probarcode int,
pihao int,
sum_num int
)
insert into tb(probarcode,pihao,sum_num)
select
2001,200101,1 union
select
2001,200102,6 union
select
2002,200202,0 union
select
2002,200201,0 union
select
2003,200301,4 union
select
2003,200302,2 select tb.id,tb.probarcode,tb.pihao,tb.sum_num
from tb
inner join (select probarcode,max(sum_num) as sum_num
from tb
where sum_num > 0
group by probarcode) a on a.probarcode = tb.probarcode and a.sum_num = tb.sum_num
order by tb.idid probarcode pihao sum_num
----------- ----------- ----------- -----------
2 2001 200102 6
5 2003 200301 4(2 row(s) affected)
insert into tb(probarcode,pihao,sum_num)
select 2001,200101,1 union
select 2001,200102,6 union
select 2002,200202,0 union
select 2002,200201,0 union
select 2003,200301,4 union
select 2003,200302,2 select t.* from tb t where sum_num > 0 and sum_num = (select max(sum_num) from tb where sum_num > 0 and probarcode = t.probarcode) order by t.iddrop table tb/*
id probarcode pihao sum_num
----------- ----------- ----------- -----------
2 2001 200102 6
5 2003 200301 4(所影响的行数为 2 行)*/
select * from tb
select b.id,b.probarcode,tb.pihao,b.sum_num
from tb
inner join
(select min(tb.id) as id,tb.probarcode,tb.sum_num
from tb
inner join (select probarcode,max(sum_num) as sum_num
from tb
where sum_num > 0
group by probarcode) a on a.probarcode = tb.probarcode and a.sum_num = tb.sum_num
group by tb.probarcode,tb.sum_num) b on b.id = tb.id
order by tb.idid probarcode pihao sum_num
----------- ----------- ----------- -----------
2 2001 200102 6
6 2003 200301 4(2 row(s) affected)
追加一条
7,2001,200305,6 其结果仍是
2 2001 200102 6
5 2003 200301 4
where not exists(select 1 from tb where a.probarcode = probarcode
and (sum_num>a.sum_num or (sum_num=a.sum_num and id<a.id))
and not exists(select 1 from tb where a.probarcode = probarcode
and (sum_num>a.sum_num or (sum_num=a.sum_num and id<a.id))
select m.* from
(
select t.* from tb t where sum_num > 0 and sum_num = (select max(sum_num) from tb where sum_num > 0 and pihao = t.pihao)
) m where id = (select min(id) from
(
select t.* from tb t where sum_num > 0 and sum_num = (select max(sum_num) from tb where sum_num > 0 and pihao = t.pihao)
) n where pihao = n.pihao
)
insert into tb(probarcode,pihao,sum_num)
select 2001,200101,1 union
select 2001,200102,6 union
select 2002,200202,0 union
select 2002,200201,0 union
select 2003,200301,4 union
select 2003,200302,2 union
select 2001,200305,6select t.* from tb t where sum_num > 0 and sum_num = (select max(sum_num) from tb where sum_num > 0 and probarcode = t.probarcode) order by t.id
/*
id probarcode pihao sum_num
----------- ----------- ----------- -----------
2 2001 200102 6
3 2001 200305 6
6 2003 200301 4(所影响的行数为 3 行)
*/select m.* from
(
select t.* from tb t where sum_num > 0 and sum_num = (select max(sum_num) from tb where sum_num > 0 and probarcode = t.probarcode)
) m
where id = (select min(id) from
(
select t.* from tb t where sum_num > 0 and sum_num = (select max(sum_num) from tb where sum_num > 0 and probarcode = t.probarcode)
) n
where probarcode = m.probarcode
)
order by id
/*
id probarcode pihao sum_num
----------- ----------- ----------- -----------
2 2001 200102 6
6 2003 200301 4(所影响的行数为 2 行)
*/drop table tb
and (sum_num>a.sum_num or (sum_num=a.sum_num and id<a.id)))