create table test(id int identity(1,1))IDENTITY(属性)
在表中创建一个标识列。该属性与 CREATE TABLE 及 ALTER TABLE Transact-SQL 语句一起使用。说明 IDENTITY 属性与 SQL-DMO Identity 属性不同,后者表现列的行标识属性。
语法
IDENTITY [ ( seed , increment ) ]参数
seed装载到表中的第一个行所使用的值。increment增量值,该值被添加到前一个已装载的行的标识值上。必须同时指定种子和增量,或者二者都不指定。如果二者都未指定,则取默认值 (1,1)。注释
如果在经常进行删除操作的表中存在着标识列,那么在标识值之间可能会产生差距。如果这构成了问题,那么请不要使用 IDENTITY 属性。但是,为了确保未产生差距,或者为了弥补现有的差距,在用 SET IDENTITY_INSERT ON 显式地输入标识值之前,请先对现有的标识值进行计算。如果重新使用已删除的标识值,那么请使用示例 B 中的示例代码进行检查,以获得下一个可用的标识值。请用您的表名、标识列数据类型以及(该数据类型的)最大可允许值的数值 –1 替换 tablename、column_type 和 max(column_type) – 1。使用 DBCC CHECKIDENT 检查当前的标识值,并将其与标识列中的最大值进行比较。 当将 IDENTITY 属性与 CREATE TABLE 一起使用时,Microsoft® SQL Server™ 使用 CREATE TABLE 的 NOT FOR REPLICATION 选项替代标识列的自动增加。通常,SQL Server 给插入表中的每个新行指派一个值,该值比前面的最高值要大出某些增量。但是,如果新行是由另一个数据源复制过来的,那么标识值必须保持与其在数据源中完全相同。示例
A. 将 IDENTITY 属性与 CREATE TABLE 一起使用
下面的示例创建一个新表,该表将 IDENTITY 属性用于获得自动增加的标识号。USE pubs
IF EXISTS(SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'new_employees')
DROP TABLE new_employees
GO
CREATE TABLE new_employees
(
id_num int IDENTITY(1,1),
fname varchar (20),
minit char(1),
lname varchar(30)
)INSERT new_employees
(fname, minit, lname)
VALUES
('Karin', 'F', 'Josephs')INSERT new_employees
(fname, minit, lname)
VALUES
('Pirkko', 'O', 'Koskitalo')B. 使用一般语法查找标识值中的差距
下面的示例显示一般的语法,当删除数据时,可以使用该语法查找标识值中的差距。说明 下面的 Transact-SQL 脚本中的第一部分只用作示范说明。可以运行以下面的注释开始的 Transact-SQL 脚本:- - Create the img table.
-- Here is the generic syntax for finding identity value gaps in data.
-- This is the beginning of the illustrative example.
SET IDENTITY_INSERT tablename ONDECLARE @minidentval column_type
DECLARE @nextidentval column_type
SELECT @minidentval = MIN(IDENTITYCOL) FROM tablename
IF @minidentval = IDENT_SEED('tablename')
SELECT @nextidentval = MIN(IDENTITYCOL) + IDENT_INCR('tablename')
FROM tablename t1
WHERE IDENTITYCOL BETWEEN IDENT_SEED('tablename') AND
MAX(column_type) AND
NOT EXISTS (SELECT * FROM tablename t2
WHERE t2.IDENTITYCOL = t1.IDENTITYCOL +
IDENT_INCR('tablename'))
ELSE
SELECT @nextidentval = IDENT_SEED('tablename')
SET IDENTITY_INSERT tablename OFF
-- Here is an example to find gaps in the actual data.
-- The table is called img and has two columns: the first column
-- called id_num, which is an increasing identification number, and the
-- second column called company_name.
-- This is the end of the illustration example.-- Create the img table.
-- If the img table already exists, drop it.
-- Create the img table.
IF EXISTS(SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'img')
DROP TABLE img
GO
CREATE TABLE img (id_num int IDENTITY(1,1), company_name sysname)
INSERT img(company_name) VALUES ('New Moon Books')
INSERT img(company_name) VALUES ('Lucerne Publishing')
-- SET IDENTITY_INSERT ON and use in img table.
SET IDENTITY_INSERT img ONDECLARE @minidentval smallint
DECLARE @nextidentval smallint
SELECT @minidentval = MIN(IDENTITYCOL) FROM img
IF @minidentval = IDENT_SEED('img')
SELECT @nextidentval = MIN(IDENTITYCOL) + IDENT_INCR('img')
FROM img t1
WHERE IDENTITYCOL BETWEEN IDENT_SEED('img') AND 32766 AND
NOT EXISTS (SELECT * FROM img t2
WHERE t2.IDENTITYCOL = t1.IDENTITYCOL + IDENT_INCR('img'))
ELSE
SELECT @nextidentval = IDENT_SEED('img')
SET IDENTITY_INSERT img OFF
在表中创建一个标识列。该属性与 CREATE TABLE 及 ALTER TABLE Transact-SQL 语句一起使用。说明 IDENTITY 属性与 SQL-DMO Identity 属性不同,后者表现列的行标识属性。
语法
IDENTITY [ ( seed , increment ) ]参数
seed装载到表中的第一个行所使用的值。increment增量值,该值被添加到前一个已装载的行的标识值上。必须同时指定种子和增量,或者二者都不指定。如果二者都未指定,则取默认值 (1,1)。注释
如果在经常进行删除操作的表中存在着标识列,那么在标识值之间可能会产生差距。如果这构成了问题,那么请不要使用 IDENTITY 属性。但是,为了确保未产生差距,或者为了弥补现有的差距,在用 SET IDENTITY_INSERT ON 显式地输入标识值之前,请先对现有的标识值进行计算。如果重新使用已删除的标识值,那么请使用示例 B 中的示例代码进行检查,以获得下一个可用的标识值。请用您的表名、标识列数据类型以及(该数据类型的)最大可允许值的数值 –1 替换 tablename、column_type 和 max(column_type) – 1。使用 DBCC CHECKIDENT 检查当前的标识值,并将其与标识列中的最大值进行比较。 当将 IDENTITY 属性与 CREATE TABLE 一起使用时,Microsoft® SQL Server™ 使用 CREATE TABLE 的 NOT FOR REPLICATION 选项替代标识列的自动增加。通常,SQL Server 给插入表中的每个新行指派一个值,该值比前面的最高值要大出某些增量。但是,如果新行是由另一个数据源复制过来的,那么标识值必须保持与其在数据源中完全相同。示例
A. 将 IDENTITY 属性与 CREATE TABLE 一起使用
下面的示例创建一个新表,该表将 IDENTITY 属性用于获得自动增加的标识号。USE pubs
IF EXISTS(SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'new_employees')
DROP TABLE new_employees
GO
CREATE TABLE new_employees
(
id_num int IDENTITY(1,1),
fname varchar (20),
minit char(1),
lname varchar(30)
)INSERT new_employees
(fname, minit, lname)
VALUES
('Karin', 'F', 'Josephs')INSERT new_employees
(fname, minit, lname)
VALUES
('Pirkko', 'O', 'Koskitalo')B. 使用一般语法查找标识值中的差距
下面的示例显示一般的语法,当删除数据时,可以使用该语法查找标识值中的差距。说明 下面的 Transact-SQL 脚本中的第一部分只用作示范说明。可以运行以下面的注释开始的 Transact-SQL 脚本:- - Create the img table.
-- Here is the generic syntax for finding identity value gaps in data.
-- This is the beginning of the illustrative example.
SET IDENTITY_INSERT tablename ONDECLARE @minidentval column_type
DECLARE @nextidentval column_type
SELECT @minidentval = MIN(IDENTITYCOL) FROM tablename
IF @minidentval = IDENT_SEED('tablename')
SELECT @nextidentval = MIN(IDENTITYCOL) + IDENT_INCR('tablename')
FROM tablename t1
WHERE IDENTITYCOL BETWEEN IDENT_SEED('tablename') AND
MAX(column_type) AND
NOT EXISTS (SELECT * FROM tablename t2
WHERE t2.IDENTITYCOL = t1.IDENTITYCOL +
IDENT_INCR('tablename'))
ELSE
SELECT @nextidentval = IDENT_SEED('tablename')
SET IDENTITY_INSERT tablename OFF
-- Here is an example to find gaps in the actual data.
-- The table is called img and has two columns: the first column
-- called id_num, which is an increasing identification number, and the
-- second column called company_name.
-- This is the end of the illustration example.-- Create the img table.
-- If the img table already exists, drop it.
-- Create the img table.
IF EXISTS(SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = 'img')
DROP TABLE img
GO
CREATE TABLE img (id_num int IDENTITY(1,1), company_name sysname)
INSERT img(company_name) VALUES ('New Moon Books')
INSERT img(company_name) VALUES ('Lucerne Publishing')
-- SET IDENTITY_INSERT ON and use in img table.
SET IDENTITY_INSERT img ONDECLARE @minidentval smallint
DECLARE @nextidentval smallint
SELECT @minidentval = MIN(IDENTITYCOL) FROM img
IF @minidentval = IDENT_SEED('img')
SELECT @nextidentval = MIN(IDENTITYCOL) + IDENT_INCR('img')
FROM img t1
WHERE IDENTITYCOL BETWEEN IDENT_SEED('img') AND 32766 AND
NOT EXISTS (SELECT * FROM img t2
WHERE t2.IDENTITYCOL = t1.IDENTITYCOL + IDENT_INCR('img'))
ELSE
SELECT @nextidentval = IDENT_SEED('img')
SET IDENTITY_INSERT img OFF
Set mcnn = New Connection
Dim iTemp As Long
If mcnn.State = adStateOpen Then mcnn.Close
mcnn.Open cnnstring
Set mrs = New Recordset
If mrs.State = adStateOpen Then mrs.Close
mrs.Open "select abid from " & tablename & " order by abid asc", mcnn, adOpenStatic, adLockReadOnly
If mrs.RecordCount < 1 Then
fGetIndex = 0
Exit Function
Else
mrs.MoveFirst
For iTemp = 1 To mrs.RecordCount - 1
If iTemp < mrs!abid Then
fGetIndex = iTemp
Exit Function
End If
mrs.MoveNext
Next iTemp
iTemp = iTemp + 1
End If
不过程序还有错,帮我改改?呵呵。
Public Function fGetIndex(ByVal tablename As String, ByVal cnnstring As String) As Integer
Set mcnn = New Connection
Dim iTemp As Long
If mcnn.State = adStateOpen Then mcnn.Close
mcnn.Open cnnstring
Set mrs = New Recordset
If mrs.State = adStateOpen Then mrs.Close
mrs.Open "select abid from " & tablename & " order by abid asc", mcnn, adOpenStatic, adLockReadOnly
If mrs.RecordCount < 1 Then
fGetIndex = 1
Exit Function
Else
mrs.MoveFirst
For iTemp = 1 To mrs.RecordCount - 1
If iTemp < mrs!abid Then
fGetIndex = iTemp
Exit Function
End If
mrs.MoveNext
Next iTemp
iTemp = iTemp + 1
fGetIndex = iTemp
End If
End Function