create proc getpage (@sqlstr nvarchar(4000), --查询字符串 @pagecount int=1, --第N页 @pagesize int=99999999) --每页行数 as begin set nocount on declare @P1 int--P1是游标的id set @pagecount=(@pagecount-1)*@pagesize+1 exec sp_cursoropen @P1 output,@sqlstr exec sp_cursorfetch @P1,16,@pagecount,@pagesize exec sp_cursorclose @P1 end 用法: exec getpage 'SELECT * FROM TAB WHERE ...... ',10,100
在前台使用时选择第二个RECORDSET
看看下面代码,可以得到记录总行数。总页数。当前页。你自已改改吧,比你那个简单多了。 declare @sqlstr nvarchar(4000), --查询字符串 @pagecount int, --第N页 @pagesize int , --每页行 @rowcount int select @pagecount=3,@pagesize=100 set @sqlstr='select * from sysobjects' set nocount on declare @P1 int--P1是游标的id exec sp_cursoropen @P1 output,@sqlstr,@scrollopt=1,@ccopt=1,@rowcount=@rowcount OUTPUT select @rowcount as 总行数,ceiling(1.0*@rowcount/@pagesize) as 页数,@pagecount as 当前页 set @pagecount=(@pagecount-1)*@pagesize+1 exec sp_cursorfetch @P1,16,@pagecount,@pagesize exec sp_cursorclose @P1
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[p_show]') and OBJECTPROPERTY(id, N'IsProcedure') = 1) drop procedure [dbo].[p_show] GO/*--实现分页的通用存储过程 显示指定表、视图、查询结果的第X页 对于表中主键或标识列的情况,直接从原表取数查询,其它情况使用临时表的方法 如果视图或查询结果中有主键,不推荐此方法 如果使用查询语句,而且查询语句使用了order by,则查询语句必须包含top 语句--邹建 2003.09--*//*--调用示例 exec p_show '地区资料' exec p_show 'select top 100 percent * from 地区资料 order by 地区名称',5,3,'地区编号,地区名称,助记码' --*/ CREATE Proc p_show @QueryStr nvarchar(4000), --表名、视图名、查询语句 @PageSize int=10, --每页的大小(行数) @PageCurrent int=1, --要显示的页 @FdShow nvarchar (4000)='', --要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段 @FdOrder nvarchar (1000)='' --排序字段列表 as declare @FdName nvarchar(250) --表中的主键或表、临时表中的标识列名 ,@Id1 varchar(20),@Id2 varchar(20) --开始和结束的记录号 ,@Obj_ID int --对象ID --表中有复合主键的处理 declare @strfd nvarchar(2000) --复合主键列表 ,@strjoin nvarchar(4000) --连接字段 ,@strwhere nvarchar(2000) --查询条件 select @Obj_ID=object_id(@QueryStr) ,@FdShow=case isnull(@FdShow,'') when '' then ' *' else ' '+@FdShow end ,@FdOrder=case isnull(@FdOrder,'') when '' then '' else ' order by '+@FdOrder end ,@QueryStr=case when @Obj_ID is not null then ' '+@QueryStr else ' ('+@QueryStr+') a' end--如果显示第一页,可以直接用top来完成 if @PageCurrent=1 begin select @Id1=cast(@PageSize as varchar(20)) exec('select top '+@Id1+@FdShow+' from '+@QueryStr+@FdOrder) return end--如果是表,则检查表中是否有标识更或主键 if @Obj_ID is not null and objectproperty(@Obj_ID,'IsTable')=1 begin select @Id1=cast(@PageSize as varchar(20)) ,@Id2=cast((@PageCurrent-1)*@PageSize as varchar(20)) select @FdName=name from syscolumns where id=@Obj_ID and status=0x80 if @@rowcount=0 --如果表中无标识列,则检查表中是否有主键 begin if not exists(select 1 from sysobjects where parent_obj=@Obj_ID and xtype='PK') goto lbusetemp --如果表中无主键,则用临时表处理 select @FdName=name from syscolumns where id=@Obj_ID and colid in( select colid from sysindexkeys where @Obj_ID=id and indid in( select indid from sysindexes where @Obj_ID=id and name in( select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID ))) if @@rowcount>1 --检查表中的主键是否为复合主键 begin select @strfd='',@strjoin='',@strwhere='' select @strfd=@strfd+',['+name+']' ,@strjoin=@strjoin+' and a.['+name+']=b.['+name+']' ,@strwhere=@strwhere+' and b.['+name+'] is null' from syscolumns where id=@Obj_ID and colid in( select colid from sysindexkeys where @Obj_ID=id and indid in( select indid from sysindexes where @Obj_ID=id and name in( select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID ))) select @strfd=substring(@strfd,2,2000) ,@strjoin=substring(@strjoin,5,4000) ,@strwhere=substring(@strwhere,5,4000) goto lbusepk end end end else goto lbusetemp/*--使用标识列或主键为单一字段的处理方法--*/ lbuseidentity: exec('select top '+@Id1+@FdShow+' from '+@QueryStr +' where '+@FdName+' not in(select top ' +@Id2+' '+@FdName+' from '+@QueryStr+@FdOrder +')'+@FdOrder ) return/*--表中有复合主键的处理方法--*/ lbusepk: exec('select '+@FdShow+' from(select top '+@Id1+' a.* from (select top 100 percent * from '+@QueryStr+@FdOrder+') a left join (select top '+@Id2+' '+@strfd+' from '+@QueryStr+@FdOrder+') b on '+@strjoin+' where '+@strwhere+') a' ) return/*--用临时表处理的方法--*/ lbusetemp: select @FdName='[ID_'+cast(newid() as varchar(40))+']' ,@Id1=cast(@PageSize*(@PageCurrent-1) as varchar(20)) ,@Id2=cast(@PageSize*@PageCurrent-1 as varchar(20))exec('select '+@FdName+'=identity(int,0,1),'+@FdShow+' into #tb from'+@QueryStr+@FdOrder+' select '+@FdShow+' from #tb where '+@FdName+' between ' +@Id1+' and '+@Id2 )GO
(@sqlstr nvarchar(4000), --查询字符串
@pagecount int=1, --第N页
@pagesize int=99999999) --每页行数
as
begin
set nocount on
declare @P1 int--P1是游标的id
set @pagecount=(@pagecount-1)*@pagesize+1
exec sp_cursoropen @P1 output,@sqlstr
exec sp_cursorfetch @P1,16,@pagecount,@pagesize
exec sp_cursorclose @P1
end
用法:
exec getpage 'SELECT * FROM TAB WHERE ...... ',10,100
declare
@sqlstr nvarchar(4000), --查询字符串
@pagecount int, --第N页
@pagesize int , --每页行
@rowcount int
select @pagecount=3,@pagesize=100
set @sqlstr='select * from sysobjects'
set nocount on
declare @P1 int--P1是游标的id
exec sp_cursoropen @P1 output,@sqlstr,@scrollopt=1,@ccopt=1,@rowcount=@rowcount OUTPUT
select @rowcount as 总行数,ceiling(1.0*@rowcount/@pagesize) as 页数,@pagecount as 当前页
set @pagecount=(@pagecount-1)*@pagesize+1
exec sp_cursorfetch @P1,16,@pagecount,@pagesize
exec sp_cursorclose @P1
drop procedure [dbo].[p_show]
GO/*--实现分页的通用存储过程 显示指定表、视图、查询结果的第X页
对于表中主键或标识列的情况,直接从原表取数查询,其它情况使用临时表的方法
如果视图或查询结果中有主键,不推荐此方法
如果使用查询语句,而且查询语句使用了order by,则查询语句必须包含top 语句--邹建 2003.09--*//*--调用示例
exec p_show '地区资料' exec p_show 'select top 100 percent * from 地区资料 order by 地区名称',5,3,'地区编号,地区名称,助记码'
--*/
CREATE Proc p_show
@QueryStr nvarchar(4000), --表名、视图名、查询语句
@PageSize int=10, --每页的大小(行数)
@PageCurrent int=1, --要显示的页
@FdShow nvarchar (4000)='', --要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段
@FdOrder nvarchar (1000)='' --排序字段列表
as
declare @FdName nvarchar(250) --表中的主键或表、临时表中的标识列名
,@Id1 varchar(20),@Id2 varchar(20) --开始和结束的记录号
,@Obj_ID int --对象ID
--表中有复合主键的处理
declare @strfd nvarchar(2000) --复合主键列表
,@strjoin nvarchar(4000) --连接字段
,@strwhere nvarchar(2000) --查询条件
select @Obj_ID=object_id(@QueryStr)
,@FdShow=case isnull(@FdShow,'') when '' then ' *' else ' '+@FdShow end
,@FdOrder=case isnull(@FdOrder,'') when '' then '' else ' order by '+@FdOrder end
,@QueryStr=case when @Obj_ID is not null then ' '+@QueryStr else ' ('+@QueryStr+') a' end--如果显示第一页,可以直接用top来完成
if @PageCurrent=1
begin
select @Id1=cast(@PageSize as varchar(20))
exec('select top '+@Id1+@FdShow+' from '+@QueryStr+@FdOrder)
return
end--如果是表,则检查表中是否有标识更或主键
if @Obj_ID is not null and objectproperty(@Obj_ID,'IsTable')=1
begin
select @Id1=cast(@PageSize as varchar(20))
,@Id2=cast((@PageCurrent-1)*@PageSize as varchar(20)) select @FdName=name from syscolumns where id=@Obj_ID and status=0x80
if @@rowcount=0 --如果表中无标识列,则检查表中是否有主键
begin
if not exists(select 1 from sysobjects where parent_obj=@Obj_ID and xtype='PK')
goto lbusetemp --如果表中无主键,则用临时表处理 select @FdName=name from syscolumns where id=@Obj_ID and colid in(
select colid from sysindexkeys where @Obj_ID=id and indid in(
select indid from sysindexes where @Obj_ID=id and name in(
select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID
)))
if @@rowcount>1 --检查表中的主键是否为复合主键
begin
select @strfd='',@strjoin='',@strwhere=''
select @strfd=@strfd+',['+name+']'
,@strjoin=@strjoin+' and a.['+name+']=b.['+name+']'
,@strwhere=@strwhere+' and b.['+name+'] is null'
from syscolumns where id=@Obj_ID and colid in(
select colid from sysindexkeys where @Obj_ID=id and indid in(
select indid from sysindexes where @Obj_ID=id and name in(
select name from sysobjects where xtype='PK' and parent_obj=@Obj_ID
)))
select @strfd=substring(@strfd,2,2000)
,@strjoin=substring(@strjoin,5,4000)
,@strwhere=substring(@strwhere,5,4000)
goto lbusepk
end
end
end
else
goto lbusetemp/*--使用标识列或主键为单一字段的处理方法--*/
lbuseidentity:
exec('select top '+@Id1+@FdShow+' from '+@QueryStr
+' where '+@FdName+' not in(select top '
+@Id2+' '+@FdName+' from '+@QueryStr+@FdOrder
+')'+@FdOrder
)
return/*--表中有复合主键的处理方法--*/
lbusepk:
exec('select '+@FdShow+' from(select top '+@Id1+' a.* from
(select top 100 percent * from '+@QueryStr+@FdOrder+') a
left join (select top '+@Id2+' '+@strfd+'
from '+@QueryStr+@FdOrder+') b on '+@strjoin+'
where '+@strwhere+') a'
)
return/*--用临时表处理的方法--*/
lbusetemp:
select @FdName='[ID_'+cast(newid() as varchar(40))+']'
,@Id1=cast(@PageSize*(@PageCurrent-1) as varchar(20))
,@Id2=cast(@PageSize*@PageCurrent-1 as varchar(20))exec('select '+@FdName+'=identity(int,0,1),'+@FdShow+'
into #tb from'+@QueryStr+@FdOrder+'
select '+@FdShow+' from #tb where '+@FdName+' between '
+@Id1+' and '+@Id2
)GO
请REALGZ遵守协议。
我今年有5篇任务。
http://expert.csdn.net/Expert/topic/2365/2365596.xml?temp=.8605615