分页存储过程，

SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
--名称：分页存储过程
--使用示例 EXEC sp_PageIndex '*',' FROM StuSources ',2,10
--注意
--目前还没有对输入的参数进行严格的验证
--默认为输入都是合法有效的ALTER  PROC sp_PageIndex
@sqlSelect varchar(800) --SELECT 后面 FROM 前面的字段不用包含SELECT
,@sqlFrom varchar(800) --FROM 后面的字段包含FROM
,@countPerPage int -- 每页数据行数
,@toPage int --要转到的页码ASBEGIN
-- 根据每页数据行数和要转到的页码得到数据起止点
Declare @start int
Declare @end intset @end = @countPerPage * @toPage
set @start = @countPerPage * (@toPage - 1) + 1
-- 临时表名称可随机命名
Declare @tmpTable varchar(10)
SET @tmpTable ='#tmp'Declare @sqlStr varchar(800)
-- 创建数据源到临时表
SELECT @sqlStr = 'SELECT Identity(int,1,1) AS RowIndex,'
SELECT @sqlStr = @sqlStr + rtrim(@sqlSelect) + ' INTO  '+ @tmpTable
SELECT @sqlStr = @sqlStr + rtrim(@sqlFrom)
-- 查询临时表得到所需要的数据
SELECT @sqlStr = @sqlStr + ' '+'SELECT '+ rtrim(@sqlSelect) +' FROM ' + @tmpTable
SELECT @sqlStr = @sqlStr + ' WHERE  RowIndex BETWEEN ' + Convert(char,@start) + " AND " + Convert(char,@end)
-- 删除临时表
SELECT @sqlStr = @sqlStr + ' '+'DROP TABLE '+@tmpTable
EXEC (@sqlStr)
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO

ALTER PROCEDURE [dbo].[Basic_Pagination2005]
@tblName      nvarchar(200),     --表名
@fidlelist    nvarchar(1000),   --要查询字段
@fldName      nvarchar(100),    --排序字段
@PageSize     int,              --页尺寸
@PageIndex    int,              --页码
@IsReCount    bit ,             -- 返回记录总数, 非 0 值则返回
@OrderType    bit,              -- 设置排序类型, 非 0 值则降序
@strWhere nvarchar(1000)        --查询条件
AS
declare @sqlstr nvarchar(4000),
@tmpwhere nvarchar(4000),@tmporder nvarchar(100)
BEGIN
if @OrderType != 0
begin
set @tmporder = @fldName +' desc '
end
else
begin
        set @tmporder = @fldName +' asc '
end
set @tmpwhere='';
if(@strWhere!='')
begin
set @tmpwhere=' where '+@strWhere;
end
set @sqlstr=N'select * from
(select  '+@fidlelist+', ROW_NUMBER() OVER(orderby '+@tmporder+') as row from '+@tblName+@tmpwhere+')
tmp where row between '+cast(((@PageIndex-1)*@PageSize+1) as nvarchar)+' and '+cast(@PageIndex*@PageSize as nvarchar);
exec sp_executesql @sqlstr
if @IsReCount != 0
begin
set @sqlstr=N'select count(*) as Total from '+ @tblName+@tmpwhere
exec sp_executesql @sqlstr
end
END

set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
goALTER PROC [dbo].[PROCE_PageView2000]
(
@tbname     nvarchar(100),               --要分页显示的表名
@FieldKey   nvarchar(1000),      --用于定位记录的主键(惟一键)字段,可以是逗号分隔的多个字段
@PageCurrent int=1,               --要显示的页码
@PageSize   int=10,                --每页的大小(记录数)
@FieldShow nvarchar(1000)='',      --以逗号分隔的要显示的字段列表,如果不指定,则显示所有字段
@FieldOrder nvarchar(1000)='',      --以逗号分隔的排序字段列表,可以指定在字段后面指定DESC/ASC
@WhereString    nvarchar(1000)=N'',     --查询条件
@RecordCount int OUTPUT             --总记录数
)
AS
SET NOCOUNT ON
--检查对象是否有效
--IF OBJECT_ID(@tbname) IS NULL
--BEGIN
--    RAISERROR(N'对象"%s"不存在',1,16,@tbname)
--    RETURN
--END
--IF OBJECTPROPERTY(OBJECT_ID(@tbname),N'IsTable')=0
--    AND OBJECTPROPERTY(OBJECT_ID(@tbname),N'IsView')=0
--    AND OBJECTPROPERTY(OBJECT_ID(@tbname),N'IsTableFunction')=0
--BEGIN
--    RAISERROR(N'"%s"不是表、视图或者表值函数',1,16,@tbname)
--    RETURN
--END--分页字段检查
IF ISNULL(@FieldKey,N'')=''
BEGIN
    RAISERROR(N'分页处理需要主键（或者惟一键）',1,16)
    RETURN
END--其他参数检查及规范
IF ISNULL(@PageCurrent,0)<1 SET @PageCurrent=1
IF ISNULL(@PageSize,0)<1 SET @PageSize=10
IF ISNULL(@FieldShow,N'')=N'' SET @FieldShow=N'*'
IF ISNULL(@FieldOrder,N'')=N''
    SET @FieldOrder=N''
ELSE
    SET @FieldOrder=N'ORDER BY '+LTRIM(@FieldOrder)
IF ISNULL(@WhereString,N'')=N''
    SET @WhereString=N''
ELSE
    SET @WhereString=N'WHERE ('+@WhereString+N')'--如果@RecordCount为NULL值,则计算总页数(这样设计可以只在第一次计算总页数,以后调用时,把总页数传回给存储过程,避免再次计算总页数,对于不想计算总页数的处理而言,可以给@RecordCount赋值)
IF @RecordCount IS NULL
BEGIN
    DECLARE @sql nvarchar(4000)
    SET @sql=N'SELECT @RecordCount=COUNT(*)'
        +N' FROM '+@tbname
        +N' '+@WhereString
    EXEC sp_executesql @sql,N'@RecordCount int OUTPUT',@RecordCount OUTPUT
END--计算分页显示的TOPN值
DECLARE @TopN varchar(20),@TopN1 varchar(20)
SELECT @TopN=@PageSize,
    @TopN1=(@PageCurrent-1)*@PageSize--第一页直接显示
IF @PageCurrent=1
    EXEC(N'SELECT TOP '+@TopN
        +N' '+@FieldShow
        +N' FROM '+@tbname
        +N' '+@WhereString
        +N' '+@FieldOrder)
ELSE
BEGIN
    --处理别名
    IF @FieldShow=N'*'
        SET @FieldShow=N'a.*'    --生成主键(惟一键)处理条件
    DECLARE @Where1 nvarchar(4000),@Where2 nvarchar(4000),
        @s nvarchar(1000),@Field sysname
    SELECT @Where1=N'',@Where2=N'',@s=@FieldKey
    WHILE CHARINDEX(N',',@s)>0
        SELECT @Field=LEFT(@s,CHARINDEX(N',',@s)-1),
            @s=STUFF(@s,1,CHARINDEX(N',',@s),N''),
            @Where1=@Where1+N' AND a.'+@Field+N'=b.'+@Field,
            @Where2=@Where2+N' AND b.'+@Field+N' IS NULL',
            @WhereString=REPLACE(@WhereString,@Field,N'a.'+@Field),
            @FieldOrder=REPLACE(@FieldOrder,@Field,N'a.'+@Field),
            @FieldShow=REPLACE(@FieldShow,@Field,N'a.'+@Field)
    SELECT @WhereString=REPLACE(@WhereString,@s,N'a.'+@s),
        @FieldOrder=REPLACE(@FieldOrder,@s,N'a.'+@s),
        @FieldShow=REPLACE(@FieldShow,@s,N'a.'+@s),
        @Where1=STUFF(@Where1+N' AND a.'+@s+N'=b.'+@s,1,5,N''),
        @Where2=CASE
            WHEN @WhereString='' THEN N'WHERE ('
            ELSE @WhereString+N' AND ('
            END+N'b.'+@s+N' IS NULL'+@Where2+N')'    --执行查询
    EXEC(N'SELECT TOP '+@TopN
        +N' '+@FieldShow
        +N' FROM '+@tbname
        +N' a LEFT JOIN(SELECT TOP '+@TopN1
        +N' '+@FieldKey
        +N' FROM '+@tbname
        +N' a '+@WhereString
        +N' '+@FieldOrder
        +N')b ON '+@Where1
        +N' '+@Where2
        +N' '+@FieldOrder)
END

MSSQL2005set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[PROCE_SQL2005PAGECHANGE]
(
@TableName varchar(50),            --表名
@ReFieldsStr varchar(200) = '*',   --字段名(全部字段为*)
@OrderString varchar(200),         --排序字段(必须!支持多字段不用加order by)
@WhereString varchar(500) =N'',  --条件语句(不用加where)
@PageSize int,                     --每页多少条记录
@PageIndex int = 1 ,               --指定当前为第几页
@TotalRecord int output            --返回总记录数
)
AS

BEGIN        --处理开始点和结束点
    Declare @StartRecord int;
    Declare @EndRecord int;
    Declare @TotalCountSql nvarchar(500);
    Declare @SqlString nvarchar(2000);
    set @StartRecord = (@PageIndex-1)*@PageSize + 1
    set @EndRecord = @StartRecord + @PageSize - 1
    SET @TotalCountSql= N'select @TotalRecord = count(*) from ' + @TableName;--总记录数语句
    SET @SqlString = N'(select row_number() over (order by '+ @OrderString +') as rowId,'+@ReFieldsStr+' from '+ @TableName;--查询语句
    --
    IF (@WhereString! = '' or @WhereString!=null)
        BEGIN
            SET @TotalCountSql=@TotalCountSql + '  where '+ @WhereString;
            SET @SqlString =@SqlString+ '  where '+ @WhereString;
        END
    --第一次执行得到
    --IF(@TotalRecord is null)
    --   BEGIN
           EXEC sp_executesql @totalCountSql,N'@TotalRecord int out',@TotalRecord output;--返回总记录数
    --  END
    ----执行主语句
    set @SqlString ='select * from ' + @SqlString + ') as t where rowId between ' + ltrim(str(@StartRecord)) + ' and ' +  ltrim(str(@EndRecord));
    Exec(@SqlString)
END

SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GOALTER PROCEDURE [dbo].[P_TB_UserInfoRecyle_GetList] @PageIndex INT=0, --页索引
@PageSize INT, --页码
@TotalRecords INT OUTPUT --输出总条数
AS
BEGIN
--定义开始索引和结束索引
--定义开始索引和结束索引
DECLARE @PageLowerBound INT
DECLARE @PageUpperBound INT

--计算开始索引和结束索引

SET @PageLowerBound = @PageIndex * @PageSize + 1
SET @PageUpperBound = @PageLowerBound + @PageSize - 1

--获取数据
BEGIN

select @TotalRecords=count(TU.ID)
from TB_UserInfo as TU
where TU.IsDel=1 ;

--生成临时表
WITH CurrencyWithRowNumber AS (
SELECT
ROW_NUMBER() OVER (ORDER BY TU.ID DESC) AS RowNumber,
TU.ID,
TU.LoginName,
TU.UserName,
TU.IsDel,
TU.DepartmentID,
TU.CreateDate,
TU.OutDate,
TU.Pwd

from TB_UserInfo as TU
where TU.IsDel=1
)

--获取临时表中的数据
SELECT
    RowNumber,
    ID,
LoginName,
UserName,
IsDel,
DepartmentID,
CreateDate,OutDate,
Pwd

FROM CurrencyWithRowNumber WHERE (RowNumber BETWEEN @PageLowerBound AND @PageUpperBound) ORDER BY  RowNumber

END

END

调试易

分页存储过程，

解决方案 »