110615 17:16:53 [Note] Plugin 'FEDERATED' is disabled.
110615 17:16:53 InnoDB: Initializing buffer pool, size = 95.0M
110615 17:16:53 InnoDB: Completed initialization of buffer pool
InnoDB: The first specified data file .\ibdata1 did not exist:
InnoDB: a new database to be created!
110615 17:16:53 InnoDB: Setting file .\ibdata1 size to 10 MB
InnoDB: Database physically writes the file full: wait...
110615 17:16:53 InnoDB: Log file .\ib_logfile0 did not exist: new to be created
InnoDB: Setting log file .\ib_logfile0 size to 19 MB
InnoDB: Database physically writes the file full: wait...
110615 17:16:54 InnoDB: Log file .\ib_logfile1 did not exist: new to be created
InnoDB: Setting log file .\ib_logfile1 size to 19 MB
InnoDB: Database physically writes the file full: wait...
InnoDB: Doublewrite buffer not found: creating new
InnoDB: Doublewrite buffer created
InnoDB: Creating foreign key constraint system tables
InnoDB: Foreign key constraint system tables created
110615 17:16:54 InnoDB: Started; log sequence number 0 0
110615 17:16:54 [Note] Event Scheduler: Loaded 0 events
110615 17:16:54 [Note] D:\MySql\bin\mysqld: ready for connections.
Version: '5.1.55-community' socket: '' port: 3306 MySQL Community Server (GPL)
110615 17:32:02 [Note] D:\MySql\bin\mysqld: Normal shutdown110615 17:32:02 [Note] Event Scheduler: Purging the queue. 0 events
110615 17:32:02 InnoDB: Starting shutdown...
110615 17:32:04 InnoDB: Shutdown completed; log sequence number 0 44233
110615 17:32:04 [Note] D:\MySql\bin\mysqld: Shutdown complete110616 8:58:56 [Note] Plugin 'FEDERATED' is disabled.
110616 8:58:56 InnoDB: Initializing buffer pool, size = 95.0M
110616 8:58:56 InnoDB: Completed initialization of buffer pool
110616 8:58:56 InnoDB: Started; log sequence number 0 44233
110616 8:58:56 [Note] Event Scheduler: Loaded 0 events
110616 8:58:56 [Note] D:\MySql\bin\mysqld: ready for connections.
Version: '5.1.55-community' socket: '' port: 3306 MySQL Community Server (GPL)
这是整个.err里面的东西。。
求帮助啊。
110615 17:16:53 InnoDB: Initializing buffer pool, size = 95.0M
110615 17:16:53 InnoDB: Completed initialization of buffer pool
InnoDB: The first specified data file .\ibdata1 did not exist:
InnoDB: a new database to be created!
110615 17:16:53 InnoDB: Setting file .\ibdata1 size to 10 MB
InnoDB: Database physically writes the file full: wait...
110615 17:16:53 InnoDB: Log file .\ib_logfile0 did not exist: new to be created
InnoDB: Setting log file .\ib_logfile0 size to 19 MB
InnoDB: Database physically writes the file full: wait...
110615 17:16:54 InnoDB: Log file .\ib_logfile1 did not exist: new to be created
InnoDB: Setting log file .\ib_logfile1 size to 19 MB
InnoDB: Database physically writes the file full: wait...
InnoDB: Doublewrite buffer not found: creating new
InnoDB: Doublewrite buffer created
InnoDB: Creating foreign key constraint system tables
InnoDB: Foreign key constraint system tables created
110615 17:16:54 InnoDB: Started; log sequence number 0 0
110615 17:16:54 [Note] Event Scheduler: Loaded 0 events
110615 17:16:54 [Note] D:\MySql\bin\mysqld: ready for connections.
Version: '5.1.55-community' socket: '' port: 3306 MySQL Community Server (GPL)
110615 17:32:02 [Note] D:\MySql\bin\mysqld: Normal shutdown110615 17:32:02 [Note] Event Scheduler: Purging the queue. 0 events
110615 17:32:02 InnoDB: Starting shutdown...
110615 17:32:04 InnoDB: Shutdown completed; log sequence number 0 44233
110615 17:32:04 [Note] D:\MySql\bin\mysqld: Shutdown complete110616 8:58:56 [Note] Plugin 'FEDERATED' is disabled.
110616 8:58:56 InnoDB: Initializing buffer pool, size = 95.0M
110616 8:58:56 InnoDB: Completed initialization of buffer pool
110616 8:58:56 InnoDB: Started; log sequence number 0 44233
110616 8:58:56 [Note] Event Scheduler: Loaded 0 events
110616 8:58:56 [Note] D:\MySql\bin\mysqld: ready for connections.
Version: '5.1.55-community' socket: '' port: 3306 MySQL Community Server (GPL)
这是整个.err里面的东西。。
求帮助啊。
# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard
#
#
# Installation Instructions
# ----------------------------------------------------------------------
#
# On Linux you can copy this file to /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to
# ~/.my.cnf to set user-specific options.
#
# On Windows you should keep this file in the installation directory
# of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To
# make sure the server reads the config file use the startup option
# "--defaults-file".
#
# To run run the server from the command line, execute this in a
# command line shell, e.g.
# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# To install the server as a Windows service manually, execute this in a
# command line shell, e.g.
# mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# And then execute this in a command line shell to start the server, e.g.
# net start MySQLXY
#
#
# Guildlines for editing this file
# ----------------------------------------------------------------------
#
# In this file, you can use all long options that the program supports.
# If you want to know the options a program supports, start the program
# with the "--help" option.
#
# More detailed information about the individual options can also be
# found in the manual.
#
#
# CLIENT SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client]port=3306[mysql]default-character-set=gbk
# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#
[mysqld]
# The TCP/IP Port the MySQL Server will listen on
port=3306
#Path to installation directory. All paths are usually resolved relative to this.
basedir="D:/MySql/"#Path to the database root
datadir="D:/MySql/Data/"# The default character set that will be used when a new schema or table is
# created and no character set is defined
default-character-set=gbk# The default storage engine that will be used when create new tables when
default-storage-engine=INNODB# Set the SQL mode to strict
sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=100# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=32M# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_cache=256# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=34M
# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before. This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=8#*** MyISAM Specific options# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method. This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=68M# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=49M# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=64K
read_rnd_buffer_size=256K# This buffer is allocated when MySQL needs to rebuild the index in
# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
sort_buffer_size=256K
#*** INNODB Specific options ***
# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
#skip-innodb# Additional memory pool that is used by InnoDB to store metadata
# information. If InnoDB requires more memory for this purpose it will
# start to allocate it from the OS. As this is fast enough on most
# recent operating systems, you normally do not need to change this
# value. SHOW INNODB STATUS will display the current amount used.
innodb_additional_mem_pool_size=2M# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=1M# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system. Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=95M# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=19M# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=18
这是my.ini的，有点长。。
#Path to installation directory. All paths are usually resolved relative to this.
basedir="D:/MySql/"#Path to the database root
datadir="D:/MySql/Data/"这两个都存在是否有访问权限怎么看？
win7旗舰。
用户登陆系统是指什么？
真的很郁闷。
好不容易把基本环境都弄好了，mysql出问题了真蛋疼啊。
还有一点，我安装的时候就跟网上的安装截图有少部分出入。
我的问题？还是正常？
如果是我下载的mysql本身的问题，还望给个可靠的下载地址啊。
我是5.1.55版本的。
是在开始里面打开的，在文件夹里面点击mysql.exe不行， 一闪就关闭了
然后提示我输入密码，
然后不管我输入什么结果都一样，
瞬间出现一排英文，都来不及看是什么，
然后窗口关闭了。
mysql -uroot -p
提示什么，进程中检查一下MYSQL服务起动没有
还是我方法用错了？
提示什么
你是怎样输入的
mysql -uroot -p？
还是什么情况呢？
mysql -uroot -p
提示什么
是否有
mysql>?
然后下面是mysql>_
然后下面是mysql>_
已经在MYSQL的命令行下了，可以 操作MYSQL了，比如建立数据库 、表、SQL语句等等
如果直接点击mysql.exe,,,,直接一闪就消失啊。。
如果不影响操作打开麻烦点也就无所谓了
只是单纯的很蛋疼
odbc驱动连接吗？
java是jdbc吧
我主要是想可以直接打开mysql而不用cmd这样打开。
MySQL Workbenchhttp://dev.mysql.com/downloads/connector/j/
JDBC
在windows下面哪有这样运行命令行程序的啊？！以后请把你的操作过程描述清楚，免得大家费了老半天劲问你具体操作过程。你可以在cmd里运行mysql.exe，建立直接用这个工具。熟练以后可以再使用gui客户端。