求my.ini的标准配置

下面是MYSQL的默认配置文件(稍有修改)# MySQL Server Instance Configuration File
# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard
#
#
# Installation Instructions
# ----------------------------------------------------------------------
#
# On Linux you can copy this file to /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to
# ~/.my.cnf to set user-specific options.
#
# On Windows you should keep this file in the installation directory
# of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To
# make sure the server reads the config file use the startup option
# "--defaults-file".
#
# To run run the server from the command line, execute this in a
# command line shell, e.g.
# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# To install the server as a Windows service manually, execute this in a
# command line shell, e.g.
# mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# And then execute this in a command line shell to start the server, e.g.
# net start MySQLXY
#
#
# Guildlines for editing this file
# ----------------------------------------------------------------------
#
# In this file, you can use all long options that the program supports.
# If you want to know the options a program supports, start the program
# with the "--help" option.
#
# More detailed information about the individual options can also be
# found in the manual.
#
#
# CLIENT SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client]port=3306[mysql]default-character-set=latin1
#default-character-set=utf8# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#
[mysqld]# The TCP/IP Port the MySQL Server will listen on
port=3306
#Path to installation directory. All paths are usually resolved relative to this.
basedir="C:/Program Files/MySQL/MySQL Server 5.1/"#Path to the database root
datadir="C:/Program Files/MySQL/MySQL Server 5.1/DATA/"# The default character set that will be used when a new schema or table is
# created and no character set is defined
default-character-set=latin1
#default-character-set=utf8# The default storage engine that will be used when create new tables when
default-storage-engine=INNODB# Set the SQL mode to strict
sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=100# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=0# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_cache=256# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=18M
# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before.  This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=8#*** MyISAM Specific options# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method.  This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=35M# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=25M# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=64K
read_rnd_buffer_size=256K# This buffer is allocated when MySQL needs to rebuild the index in
# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
sort_buffer_size=256K
#*** INNODB Specific options ***
# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
#skip-innodb# Additional memory pool that is used by InnoDB to store metadata
# information.  If InnoDB requires more memory for this purpose it will
# start to allocate it from the OS.  As this is fast enough on most
# recent operating systems, you normally do not need to change this
# value. SHOW INNODB STATUS will display the current amount used.
innodb_additional_mem_pool_size=2M# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=1M# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system.  Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=47M# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=24M# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=8#Enter a name for the query log file. Otherwise a default name will be used.
#log=
#Enter a name for the error log file. Otherwise a default name will be used.
#log-error=
#Enter a name for the slow query log. Otherwise a default name will be used.
#log-slow-queries=#Enter a name for the query log file. Otherwise a default name will be used.
log=
#Enter a name for the error log file. Otherwise a default name will be used.
log-error=
#Enter a name for the slow query log. Otherwise a default name will be used.
log-slow-queries=
#Enter a name for the update log file. Otherwise a default name will be used.
#log-update=
#Enter a name for the isam logfile. Otherwise a default name will be used.
#log-isam=
log-bin=

myisam_max_sort_file_size=100G 恐怖

感觉狼兄好像没有粘全阿
重新发下
# Example MySQL config file for large systems.## This is for a large system with memory = 512M where the system runs mainly# MySQL.## You can copy this file to# /etc/my.cnf to set global options,# mysql-data-dir/my.cnf to set server-specific options (in this# installation this directory is C:\mysql\data) or# ~/.my.cnf to set user-specific options.## In this file, you can use all long options that a program supports.# If you want to know which options a program supports, run the program# with the "--help" option.# The following options will be passed to all MySQL clients[client]#password = your_passwordport = 3306socket = /tmp/mysql.sock# Here follows entries for some specific programs# The MySQL server[mysqld]port = 3306socket = /tmp/mysql.sockskip-lockingkey_buffer_size = 256Mmax_allowed_packet = 1Mtable_open_cache = 256sort_buffer_size = 1Mread_buffer_size = 1Mread_rnd_buffer_size = 4Mmyisam_sort_buffer_size = 64Mthread_cache_size = 8query_cache_size= 16M# Try number of CPU's*2 for thread_concurrencythread_concurrency = 8# Don't listen on a TCP/IP port at all. This can be a security enhancement,# if all processes that need to connect to mysqld run on the same host.# All interaction with mysqld must be made via Unix sockets or named pipes.# Note that using this option without enabling named pipes on Windows# (via the "enable-named-pipe" option) will render mysqld useless!# #skip-networking# Replication Master Server (default)# binary logging is required for replicationlog-bin=mysql-bin# binary logging format - mixed recommendedbinlog_format=mixed# required unique id between 1 and 2^32 - 1# defaults to 1 if master-host is not set# but will not function as a master if omittedserver-id = 1# Replication Slave (comment out master section to use this)## To configure this host as a replication slave, you can choose between# two methods :## 1) Use the CHANGE MASTER TO command (fully described in our manual) -# the syntax is:## CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;## where you replace <host>, <user>, <password> by quoted strings and# <port> by the master's port number (3306 by default).## Example:## CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,# MASTER_USER='joe', MASTER_PASSWORD='secret';## OR## 2) Set the variables below. However, in case you choose this method, then# start replication for the first time (even unsuccessfully, for example# if you mistyped the password in master-password and the slave fails to# connect), the slave will create a master.info file, and any later# change in this file to the variables' values below will be ignored and# overridden by the content of the master.info file, unless you shutdown# the slave server, delete master.info and restart the slaver server.# For that reason, you may want to leave the lines below untouched# (commented) and instead use CHANGE MASTER TO (see above)## required unique id between 2 and 2^32 - 1# (and different from the master)# defaults to 2 if master-host is set# but will not function as a slave if omitted#server-id = 2## The replication master for this slave - required#master-host = <hostname>## The username the slave will use for authentication when connecting# to the master - required#master-user = <username>## The password the slave will authenticate with when connecting to# the master - required#master-password = <password>## The port the master is listening on.# optional - defaults to 3306#master-port = <port>## binary logging - not required for slaves, but recommended#log-bin=mysql-bin# Point the following paths to different dedicated disks#tmpdir = /tmp/ #log-update = /path-to-dedicated-directory/hostname# Uncomment the following if you are using InnoDB tables#innodb_data_home_dir = C:\mysql\data/#innodb_data_file_path = ibdata1:10M:autoextend#innodb_log_group_home_dir = C:\mysql\data/# You can set .._buffer_pool_size up to 50 - 80 %# of RAM but beware of setting memory usage too high#innodb_buffer_pool_size = 256M#innodb_additional_mem_pool_size = 20M# Set .._log_file_size to 25 % of buffer pool size#innodb_log_file_size = 64M#innodb_log_buffer_size = 8M#innodb_flush_log_at_trx_commit = 1#innodb_lock_wait_timeout = 50[mysqldump]quickmax_allowed_packet = 16M[mysql]no-auto-rehash# Remove the next comment character if you are not familiar with SQL#safe-updatesbasedir=D:/work/mysql-5.1.36-win32datadir=D:/work/mysql-5.1.36-win32/datadefault-character-set=utf-8 [client]default-character-set=utf-8[WinMySQLAdmin] Server=D:/work/mysql-5.1.36-win32/bin/mysqld.exe[myisamchk]key_buffer_size = 128Msort_buffer_size = 128Mread_buffer = 2Mwrite_buffer = 2M[mysqlhotcopy]interactive-timeout

The default configuration is enough to us who are greenhand.
Pay attention to encode option.

源码包里面 support-file 下

调试易

求my.ini的标准配置

解决方案 »