我写了一个.ctl文件
如下
load data
infile "a.txt"
Append into table tablename
fields terminated by ','(列名)
因为tablename是从数据库里查到的,不固定,所以列名也不固定,因此要导入所有列的数据,
那这个脚本应该怎么写?????
如下
load data
infile "a.txt"
Append into table tablename
fields terminated by ','(列名)
因为tablename是从数据库里查到的,不固定,所以列名也不固定,因此要导入所有列的数据,
那这个脚本应该怎么写?????
解决方案 »
- 如何在创建表空间时指定所属的数据库
- 求救!!oracle解锁问题
- vmware infrastructure client出现failed to power on:A general system error occurred
- oracle 中关于数据文件删除后启动不了数据库的问题!!!!!
- 请教关于用adodb链接远程oracle服务器的方法
- oracle用户管理问题,请高手帮帮忙!
- Win2000下安装Oracle90的初级问题
- 求助,错误不是group by表达式
- RowID為什么不能Selectk呢?
- oracle常见错误问题!
- 高分请教: 大数据量表字段定义的问题
- 请高手指点明灯:用触发器备份含用BLOB表-急
仓库选择使用的加载方法,因为它提供了最快速的途径(DIRECT,PARALLEL)。现在,我们抛开其理论不谈,用实例来使
您快速掌握SQL*LOADER的使用方法。
首先,我们认识一下SQL*LOADER。
在NT下,SQL*LOADER的命令为SQLLDR,在UNIX下一般为sqlldr/sqlload。
如执行:d:\oracle>sqlldr
SQL*Loader: Release 8.1.6.0.0 - Production on 星期二 1月 8 11:06:42 2002
(c) Copyright 1999 Oracle Corporation. All rights reserved.用法: SQLLOAD 关键字 = 值 [,keyword=value,...]
有效的关键字:
userid -- ORACLE username/password
control -- Control file name
log -- Log file name
bad -- Bad file name
data -- Data file name
discard -- Discard file name
discardmax -- Number of discards to allow (全部默认)
skip -- Number of logical records to skip (默认0)
load -- Number of logical records to load (全部默认)
errors -- Number of errors to allow (默认50)
rows -- Number of rows in conventional path bind array or between direct p
ath data saves
(默认: 常规路径 64, 所有直接路径)
bindsize -- Size of conventional path bind array in bytes(默认65536)
silent -- Suppress messages during run (header,feedback,errors,discards,part
itions)
direct -- use direct path (默认FALSE)
parfile -- parameter file: name of file that contains parameter specification
s
parallel -- do parallel load (默认FALSE)
file -- File to allocate extents from
skip_unusable_indexes -- disallow/allow unusable indexes or index partitions(默
认FALSE)
skip_index_maintenance -- do not maintain indexes, affected indexes as unus
able(默认FALSE)
commit_discontinued -- commit loaded rows when load is discontinued(默认FALSE)
readsize -- Size of Read buffer (默认1048576)
PLEASE NOTE: 命令行参数可以由位置或关键字指定
。前者的例子是 'sqlload
scott/tiger foo';后者的例子是 'sqlload control=foo
userid=scott/tiger'.位置指定参数的时间必须早于
但不可迟于由关键字指定的参数。例如,
'SQLLOAD SCott/tiger control=foo logfile=log', 但
'不允许 sqlload scott/tiger control=foo log',即使允许
参数 'log' 的位置正确。
d:\oracle>
我们可以从中看到一些基本的帮助信息,这里,我用到的是中文的WIN2000 ADV SERVER。
我们知道,SQL*LOADER只能导入纯文本,所以我们现在开始以实例来讲解其用法。
一、已存在数据源result.csv,欲倒入ORACLE中FANCY用户下。
result.csv内容:
1,默认 Web 站点,192.168.2.254:80:,RUNNING
2,other,192.168.2.254:80:test.com,STOPPED
3,third,192.168.2.254:81:thirdabc.com,RUNNING
从中,我们看出4列,分别以逗号分隔,为变长字符串。
二、制定控制文件result.ctl
result.ctl内容:
load data
infile 'result.csv'
into table resultxt
(resultid char terminated by ',',
website char terminated by ',',
ipport char terminated by ',',
status char terminated by whitespace)
说明:
infile 指数据源文件 这里我们省略了默认的 discardfile result.dsc badfile result.bad
into table resultxt 默认是INSERT,也可以into table resultxt APPEND为追加方式,或REPLACE
terminated by ',' 指用逗号分隔
terminated by whitespace 结尾以空白分隔
三、此时我们执行加载:
D:\>sqlldr userid=fancy/testpass control=result.ctl log=resulthis.out
SQL*Loader: Release 8.1.6.0.0 - Production on 星期二 1月 8 10:25:42 2002
(c) Copyright 1999 Oracle Corporation. All rights reserved.
SQL*Loader-941: 在描述表RESULTXT时出现错误
ORA-04043: 对象 RESULTXT 不存在
提示出错,因为数据库没有对应的表。
四、在数据库建立表
create table resultxt
(resultid varchar2(500),
website varchar2(500),
ipport varchar2(500),
status varchar2(500))
/
五、重新执行加载
D:\>sqlldr userid=fancy/k1i7l6l8 control=result.ctl log=resulthis.out
SQL*Loader: Release 8.1.6.0.0 - Production on 星期二 1月 8 10:31:57 2002
(c) Copyright 1999 Oracle Corporation. All rights reserved.
达到提交点,逻辑记录计数2
达到提交点,逻辑记录计数3
已经成功!我们可以通过日志文件来分析其过程:resulthis.out内容如下:
SQL*Loader: Release 8.1.6.0.0 - Production on 星期二 1月 8 10:31:57 2002
(c) Copyright 1999 Oracle Corporation. All rights reserved.
控制文件: result.ctl
数据文件: result.csv
错误文件: result.bad
废弃文件: 未作指定
:
(可废弃所有记录)
装载数: ALL
跳过数: 0
允许的错误: 50
绑定数组: 64 行,最大 65536 字节
继续: 未作指定
所用路径: 常规
表RESULTXT
已载入从每个逻辑记录
插入选项对此表INSERT生效
列名 位置 长度 中止 包装数据类型
------------------------------ ---------- ----- ---- ---- ---------------------
RESULTID FIRST * , CHARACTER
WEBSITE NEXT * , CHARACTER
IPPORT NEXT * , CHARACTER
STATUS NEXT * WHT CHARACTER 表RESULTXT:
3 行载入成功
由于数据错误, 0 行没有载入。
由于所有 WHEN 子句失败, 0 行没有载入。
由于所有字段都为空的, 0 行没有载入。为结合数组分配的空间: 65016字节(63行)
除绑定数组外的内存空间分配: 0字节
跳过的逻辑记录总数: 0
读取的逻辑记录总数: 3
拒绝的逻辑记录总数: 0
废弃的逻辑记录总数: 0
从星期二 1月 08 10:31:57 2002开始运行
在星期二 1月 08 10:32:00 2002处运行结束
经过时间为: 00: 00: 02.70
CPU 时间为: 00: 00: 00.10(可
六、并发操作
sqlldr userid=/ control=result1.ctl direct=true parallel=true
sqlldr userid=/ control=result2.ctl direct=true parallel=true
sqlldr userid=/ control=result2.ctl direct=true parallel=true
当加载大量数据时(大约超过10GB),最好抑制日志的产生:
SQL>ALTER TABLE RESULTXT nologging;
这样不产生REDO LOG,可以提高效率。然后在CONTROL文件中load data上面加一行:unrecoverable
此选项必须要与DIRECT共同应用。
在并发操作时,ORACLE声称可以达到每小时处理100GB数据的能力!其实,估计能到1-10G就算不错了,开始可用结构
相同的文件,但只有少量数据,成功后开始加载大量数据,这样可以避免时间的浪费。