具体要求如下:
查找test_tab表取出cardid ,金额(money),如果1个cardid 对应多个userid,则取最小userid对应的金额
限制useful=1。
即要求效果如下:
select cardid, money from test_tab where userid in (select min(userid) from test_tab where useful=1 group by cardid ); (语句效率太低,不知道有没有更好的方法?)create table test_tab
(
userid varchar2(32),
cardid varchar2(32),
useful number(3),
money number(10),
primary key (userid)
);
create index INDX_cardidon test_tab( cardid);
(a表userid和acctid都有索引)试过
select cardid, money from test_tab a where userid = (select min(userid) from test_tab b where a.carid = b.carid and useful=1 ); 但效率没有提升
查找test_tab表取出cardid ,金额(money),如果1个cardid 对应多个userid,则取最小userid对应的金额
限制useful=1。
即要求效果如下:
select cardid, money from test_tab where userid in (select min(userid) from test_tab where useful=1 group by cardid ); (语句效率太低,不知道有没有更好的方法?)create table test_tab
(
userid varchar2(32),
cardid varchar2(32),
useful number(3),
money number(10),
primary key (userid)
);
create index INDX_cardidon test_tab( cardid);
(a表userid和acctid都有索引)试过
select cardid, money from test_tab a where userid = (select min(userid) from test_tab b where a.carid = b.carid and useful=1 ); 但效率没有提升
解决方案 »
- GET_INDEX是干什么的啊?,,,在线等!!着急
- 送分100分:请问SQL SERVER2000中的master、pubs、northwind等数据库,在ORACLE中有没有同样的东西
- 复杂求平均值问题
- 查找一个表中是否有另一个表的字段的存储过程如何实现?
- 请问一个日期的sql
- 关于IF判断的问题
- 关于用户权限的一个问题
- oracle9i中文乱码问题,用sqlplus worksheet的insert中文字符时,乱码
- 存储过程的问题————help me!
- (求助)在DBMS_SQL中打开游标是啥意思??
- 一个连接oracle 中文乱码的问题
- 怎样用JDeveloper 10.1.3.3 集成Stuts+Hibernate+Spring框架?
cardid,money
from
(
select t.*,row_number() over(partition by cardid order by userid asc) rn from test_tab t
) a
where a.rn=1 and a.useful=1
select cardid, money from test_tab a where useful=1 and userid = (select min(userid) from test_tab b where a.carid = b.carid and useful=1 ); select cardid, money from test_tab a where useful=1 and not exists (select 1 from test_tab b where a.carid = b.carid and useful=1 and b.userid < a.userid); --以下为sql server的写法.--按某一字段分组取最大(小)值所在行的数据
--(爱新觉罗.毓华(十八年风雨,守得冰山雪莲花开) 2007-10-23于浙江杭州)
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
go--一、按name分组取val最大的值所在行的数据。
--方法1:
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3:
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name val memo
---------- ----------- --------------------
a 3 a3:a的第三个值
b 5 b5b5b5b5b5
*/--二、按name分组取val最小的值所在行的数据。
--方法1:
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2:
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3:
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4:
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值
*/--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
*/--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 5 b5b5b5b5b5
*/--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name,a.val
/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
a 2 a2(a的第二个值)
b 1 b1--b的第一个值
b 2 b2b2b2b2
*/--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name , a.val
/*
name val memo
---------- ----------- --------------------
a 2 a2(a的第二个值)
a 3 a3:a的第三个值
b 4 b4b4
b 5 b5b5b5b5b5
*/
--七,如果整行数据有重复,所有的列都相同。
/*
数据如下:
name val memo
a 2 a2(a的第二个值)
a 1 a1--a的第一个值
a 1 a1--a的第一个值
a 3 a3:a的第三个值
a 3 a3:a的第三个值
b 1 b1--b的第一个值
b 3 b3:b的第三个值
b 2 b2b2b2b2
b 4 b4b4
b 5 b5b5b5b5b5
*/
--在sql server 2000中只能用一个临时表来解决,生成一个自增列,先对val取最大或最小,然后再通过自增列来取数据。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
goselect * , px = identity(int,1,1) into tmp from tbselect m.name,m.val,m.memo from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) m where px = (select min(px) from
(
select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) n where n.name = m.name)drop table tb,tmp/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值(2 行受影响)
*/
--在sql server 2005中可以使用row_number函数,不需要使用临时表。
--创建表并插入数据:
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a', 2, 'a2(a的第二个值)')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 1, 'a1--a的第一个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('a', 3, 'a3:a的第三个值')
insert into tb values('b', 1, 'b1--b的第一个值')
insert into tb values('b', 3, 'b3:b的第三个值')
insert into tb values('b', 2, 'b2b2b2b2')
insert into tb values('b', 4, 'b4b4')
insert into tb values('b', 5, 'b5b5b5b5b5')
goselect m.name,m.val,m.memo from
(
select * , px = row_number() over(order by name , val) from tb
) m where px = (select min(px) from
(
select * , px = row_number() over(order by name , val) from tb
) n where n.name = m.name)drop table tb/*
name val memo
---------- ----------- --------------------
a 1 a1--a的第一个值
b 1 b1--b的第一个值(2 行受影响)
*/