怎么改阿，下面是*.ora，给点建议阿# # Copyright (c) 1991, 2000 by Oracle Corporation # ############################################################################## # Example INIT.ORA file # # This file is provided by Oracle Corporation to help you customize # your RDBMS installation for your site. Important system parameters # are discussed, and example settings given. # # Some parameter settings are generic to any size installation. # For parameters that require different values in different size # installations, three scenarios have been provided: SMALL, MEDIUM # and LARGE. Any parameter that needs to be tuned according to # installation size will have three settings, each one commented # according to installation size. # # Use the following table to approximate the SGA size needed for the # three scenarious provided in this file: # # -------Installation/Database Size------ # SMALL MEDIUM LARGE # Block 2K 4500K 6800K 17000K # Size 4K 5500K 8800K 21000K # # To set up a database that multiple instances will be using, place # all instance-specific parameters in one file, and then have all # of these files point to a master file using the IFILE command. # This way, when you change a public # parameter, it will automatically change on all instances. This is # necessary, since all instances must run with the same value for many # parameters. For example, if you choose to use private rollback segments, # these must be specified in different files, but since all gc_* # parameters must be the same on all instances, they should be in one file. # # INSTRUCTIONS: Edit this file and the other INIT files it calls for # your site, either by using the values provided here or by providing # your own. Then place an IFILE= line into each instance-specific # INIT file that points at this file. # # NOTE: Parameter values suggested in this file are based on conservative # estimates for computer memory availability. You should adjust values upward # for modern machines. # ###############################################################################db_name = "hepcztjx"instance_name = hepcztjxservice_names = hepcztjxdb_files = 1024control_files = ("D:\oracle\oradata\hepcztjx\control01.ctl", "D:\oracle\oradata\hepcztjx\control02.ctl", "D:\oracle\oradata\hepcztjx\control03.ctl")open_cursors = 300 max_enabled_roles = 30 db_file_multiblock_read_count = 8db_block_buffers = 132825shared_pool_size = 362702438large_pool_size = 614400 java_pool_size = 20971520log_checkpoint_interval = 10000 log_checkpoint_timeout = 1800processes = 150parallel_max_servers = 5log_buffer = 32768#audit_trail = true # if you want auditing #timed_statistics = true # if you want timed statistics max_dump_file_size = 10240 # limit trace file size to 5M each# Uncommenting the line below will cause automatic archiving if archiving has # been enabled using ALTER DATABASE ARCHIVELOG. # log_archive_start = true # log_archive_dest_1 = "location=D:\oracle\oradata\hepcztjx\archive" # log_archive_format = %%ORACLE_SID%%T%TS%S.ARC# If using private rollback segments, place lines of the following # form in each of your instance-specific init.ora files: #rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6, RBS7, RBS8, RBS9, RBS10, RBS11, RBS12, RBS13, RBS14, RBS15, RBS16, RBS17, RBS18, RBS19, RBS20, RBS21, RBS22, RBS23, RBS24 )# Global Naming -- enforce that a dblink has same name as the db it connects to global_names = true# Uncomment the following line if you wish to enable the Oracle Trace product # to trace server activity. This enables scheduling of server collections # from the Oracle Enterprise Manager Console. # Also, if the oracle_trace_collection_name parameter is non-null, # every session will write to the named collection, as well as enabling you # to schedule future collections from the console. # oracle_trace_enable = trueoracle_trace_collection_name = "" # define directories to store trace and alert files background_dump_dest = D:\oracle\admin\hepcztjx\bdump #Uncomment this parameter to enable resource management for your database. #The SYSTEM_PLAN is provided by default with the database. #Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan user_dump_dest = D:\oracle\admin\hepcztjx\udumpdb_block_size = 8192remote_login_passwordfile = exclusiveos_authent_prefix = ""# The following parameters are needed for the Advanced Replication Option job_queue_processes = 4 job_queue_interval = 60 open_links = 4distributed_transactions = 10 mts_dispatchers = "(PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)" # Uncomment the following line when your listener is configured for SSL # (listener.ora and sqlnet.ora) # mts_dispatchers = "(PROTOCOL=TCPS)(PRE=oracle.aurora.server.SGiopServer)"compatible = 8.1.0 sort_area_size = 65536 sort_area_retained_size = 65536
svrmgrl
connect internal/oracle
startup
lsnrctl start
然后添加到“启动”里面
# Copyright (c) 1991, 2000 by Oracle Corporation
#
##############################################################################
# Example INIT.ORA file
#
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
#
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
#
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
#
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
#
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
#
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
#
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
#
###############################################################################db_name = "hepcztjx"instance_name = hepcztjxservice_names = hepcztjxdb_files = 1024control_files = ("D:\oracle\oradata\hepcztjx\control01.ctl", "D:\oracle\oradata\hepcztjx\control02.ctl", "D:\oracle\oradata\hepcztjx\control03.ctl")open_cursors = 300
max_enabled_roles = 30
db_file_multiblock_read_count = 8db_block_buffers = 132825shared_pool_size = 362702438large_pool_size = 614400
java_pool_size = 20971520log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800processes = 150parallel_max_servers = 5log_buffer = 32768#audit_trail = true # if you want auditing
#timed_statistics = true # if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 5M each# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=D:\oracle\oradata\hepcztjx\archive"
# log_archive_format = %%ORACLE_SID%%T%TS%S.ARC# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6, RBS7, RBS8, RBS9, RBS10, RBS11, RBS12, RBS13, RBS14, RBS15, RBS16, RBS17, RBS18, RBS19, RBS20, RBS21, RBS22, RBS23, RBS24 )# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = true# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = trueoracle_trace_collection_name = ""
# define directories to store trace and alert files
background_dump_dest = D:\oracle\admin\hepcztjx\bdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = D:\oracle\admin\hepcztjx\udumpdb_block_size = 8192remote_login_passwordfile = exclusiveos_authent_prefix = ""# The following parameters are needed for the Advanced Replication Option
job_queue_processes = 4
job_queue_interval = 60
open_links = 4distributed_transactions = 10
mts_dispatchers = "(PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)"
# Uncomment the following line when your listener is configured for SSL
# (listener.ora and sqlnet.ora)
# mts_dispatchers = "(PROTOCOL=TCPS)(PRE=oracle.aurora.server.SGiopServer)"compatible = 8.1.0
sort_area_size = 65536
sort_area_retained_size = 65536