to nicholaz(欲上青天揽明月) 怎么配置呀？我把原来的删了，又建了一个，可是不管用，还是这个错误，我新的数据库和原来的结构一样，只不过变了个全局数据库名为yuan to zcs_1(生生不息) 我对orcale知道不多不知道你指的是哪个listener.ora 我在orcale目录下搜的两个listener.ora分别如小 第一个 D:\Oracle\Ora81\network\ADMIN 内容 # LISTENER.ORA Network Configuration File: D:\Oracle\Ora81\NETWORK\ADMIN\listener.ora # Generated by Oracle configuration tools.LISTENER = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = yuan)(PORT = 1521)) ) 第二个D:\Oracle\Ora81\network\ADMIN\SAMPLE 内容： # copyright (c) 1997 by the Oracle Corporation # # NAME # listener.ora # FUNCTION # Network Listener startup parameter file example # NOTES # This file contains all the parameters for listener.ora, # and could be used to configure the listener by uncommenting # and changing values. Multiple listeners can be configured # in one listener.ora, so listener.ora parameters take the form # of SID_LIST_<lsnr>, where <lsnr> is the name of the listener # this parameter refers to. All parameters and values are # case-insensitive.# <lsnr> # This parameter specifies both the name of the listener, and # it listening address(es). Other parameters for this listener # us this name in place of <lsnr>. When not specified, # the name for <lsnr> defaults to "LISTENER", with the default # address value as shown below. # # LISTENER = # (ADDRESS_LIST= # (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)) # (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))) # SID_LIST_<lsnr> # List of services the listener knows about and can connect # clients to. There is no default. See the Net8 Administrator's # Guide for more information. # # SID_LIST_LISTENER= # (SID_LIST= # (SID_DESC= # #BEQUEATH CONFIG # (GLOBAL_DBNAME=salesdb.mycompany) # (SID_NAME=sid1) # (ORACLE_HOME=/private/app/oracle/product/8.0.3) # #PRESPAWN CONFIG # (PRESPAWN_MAX=20) # (PRESPAWN_LIST= # (PRESPAWN_DESC=(PROTOCOL=tcp)(POOL_SIZE=2)(TIMEOUT=1)) # ) # ) # )
# PASSWORDS_<lsnr> # Specifies a password to authenticate stopping the listener. # Both encrypted and plain-text values can be set. Encrypted passwords # can be set and stored using lsnrctl. # LSNRCTL> change_password # Will prompt for old and new passwords, and use encryption both # to match the old password and to set the new one. # LSNRCTL> set password # Will prompt for the new password, for authentication with # the listener. The password must be set before running the next # command. # LSNRCTL> save_config # Will save the changed password to listener.ora. These last two # steps are not necessary if SAVE_CONFIG_ON_STOP_<lsnr> is ON. # See below. # # Default: NONE # # PASSWORDS_LISTENER = 20A22647832FB454 # "foobar"# SAVE_CONFIG_ON_STOP_<lsnr> # Tells the listener to save configuration changes to listener.ora when # it shuts down. Changed parameter values will be written to the file, # while preserving formatting and comments. # Default: OFF # Values: ON/OFF # # SAVE_CONFIG_ON_STOP_LISTENER = ON# USE_PLUG_AND_PLAY_<lsnr> # Tells the listener to contact an Onames server and register itself # and its services with Onames. # Values: ON/OFF # Default: OFF # # USE_PLUG_AND_PLAY_LISTENER = ON# LOG_FILE_<lsnr> # Sets the name of the listener's log file. The .log extension # is added automatically. # Default=<lsnr> # # LOG_FILE_LISTENER = lsnr# LOG_DIRECTORY_<lsnr> # Sets the directory for the listener's log file. # Default: <oracle_home>/network/log # # LOG_DIRECTORY_LISTENER = /private/app/oracle/product/8.0.3/network/log# TRACE_LEVEL_<lsnr> # Specifies desired tracing level. # Default: OFF # Values: OFF/USER/ADMIN/SUPPORT/0-16 # # TRACE_LEVEL_LISTENER = SUPPORT# TRACE_FILE_<lsnr> # Sets the name of the listener's trace file. The .trc extension # is added automatically. # Default: <lsnr> # # TRACE_FILE_LISTENER = lsnr# TRACE_DIRECTORY_<lsnr> # Sets the directory for the listener's trace file. # Default: <oracle_home>/network/trace # # TRACE_DIRECTORY_LISTENER=/private/app/oracle/product/8.0.3/network/trace # CONNECT_TIMEOUT_<lsnr> # Sets the number of seconds that the listener waits to get a # valid database query after it has been started. # Default: 10 # # CONNECT_TIMEOUT_LISTENER=10
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.1)(PORT = 1521))
)
(CONNECT_DATA = (SID = SID名)(SERVER = DEDICATED))
)
怎么配置呀？我把原来的删了，又建了一个，可是不管用，还是这个错误，我新的数据库和原来的结构一样，只不过变了个全局数据库名为yuan to zcs_1(生生不息) 我对orcale知道不多不知道你指的是哪个listener.ora
我在orcale目录下搜的两个listener.ora分别如小
第一个 D:\Oracle\Ora81\network\ADMIN
内容
# LISTENER.ORA Network Configuration File: D:\Oracle\Ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = yuan)(PORT = 1521))
)
第二个D:\Oracle\Ora81\network\ADMIN\SAMPLE
内容：
# copyright (c) 1997 by the Oracle Corporation
#
# NAME
# listener.ora
# FUNCTION
# Network Listener startup parameter file example
# NOTES
# This file contains all the parameters for listener.ora,
# and could be used to configure the listener by uncommenting
# and changing values. Multiple listeners can be configured
# in one listener.ora, so listener.ora parameters take the form
# of SID_LIST_<lsnr>, where <lsnr> is the name of the listener
# this parameter refers to. All parameters and values are
# case-insensitive.# <lsnr>
# This parameter specifies both the name of the listener, and
# it listening address(es). Other parameters for this listener
# us this name in place of <lsnr>. When not specified,
# the name for <lsnr> defaults to "LISTENER", with the default
# address value as shown below.
#
# LISTENER =
# (ADDRESS_LIST=
# (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
# (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))) # SID_LIST_<lsnr>
# List of services the listener knows about and can connect
# clients to. There is no default. See the Net8 Administrator's
# Guide for more information.
#
# SID_LIST_LISTENER=
# (SID_LIST=
# (SID_DESC=
# #BEQUEATH CONFIG
# (GLOBAL_DBNAME=salesdb.mycompany)
# (SID_NAME=sid1)
# (ORACLE_HOME=/private/app/oracle/product/8.0.3)
# #PRESPAWN CONFIG
# (PRESPAWN_MAX=20)
# (PRESPAWN_LIST=
# (PRESPAWN_DESC=(PROTOCOL=tcp)(POOL_SIZE=2)(TIMEOUT=1))
# )
# )
# )
# PASSWORDS_<lsnr>
# Specifies a password to authenticate stopping the listener.
# Both encrypted and plain-text values can be set. Encrypted passwords
# can be set and stored using lsnrctl.
# LSNRCTL> change_password
# Will prompt for old and new passwords, and use encryption both
# to match the old password and to set the new one.
# LSNRCTL> set password
# Will prompt for the new password, for authentication with
# the listener. The password must be set before running the next
# command.
# LSNRCTL> save_config
# Will save the changed password to listener.ora. These last two
# steps are not necessary if SAVE_CONFIG_ON_STOP_<lsnr> is ON.
# See below.
#
# Default: NONE
#
# PASSWORDS_LISTENER = 20A22647832FB454 # "foobar"# SAVE_CONFIG_ON_STOP_<lsnr>
# Tells the listener to save configuration changes to listener.ora when
# it shuts down. Changed parameter values will be written to the file,
# while preserving formatting and comments.
# Default: OFF
# Values: ON/OFF
#
# SAVE_CONFIG_ON_STOP_LISTENER = ON# USE_PLUG_AND_PLAY_<lsnr>
# Tells the listener to contact an Onames server and register itself
# and its services with Onames.
# Values: ON/OFF
# Default: OFF
#
# USE_PLUG_AND_PLAY_LISTENER = ON# LOG_FILE_<lsnr>
# Sets the name of the listener's log file. The .log extension
# is added automatically.
# Default=<lsnr>
#
# LOG_FILE_LISTENER = lsnr# LOG_DIRECTORY_<lsnr>
# Sets the directory for the listener's log file.
# Default: <oracle_home>/network/log
#
# LOG_DIRECTORY_LISTENER = /private/app/oracle/product/8.0.3/network/log# TRACE_LEVEL_<lsnr>
# Specifies desired tracing level.
# Default: OFF
# Values: OFF/USER/ADMIN/SUPPORT/0-16
#
# TRACE_LEVEL_LISTENER = SUPPORT# TRACE_FILE_<lsnr>
# Sets the name of the listener's trace file. The .trc extension
# is added automatically.
# Default: <lsnr>
#
# TRACE_FILE_LISTENER = lsnr# TRACE_DIRECTORY_<lsnr>
# Sets the directory for the listener's trace file.
# Default: <oracle_home>/network/trace
#
# TRACE_DIRECTORY_LISTENER=/private/app/oracle/product/8.0.3/network/trace
# CONNECT_TIMEOUT_<lsnr>
# Sets the number of seconds that the listener waits to get a
# valid database query after it has been started.
# Default: 10
#
# CONNECT_TIMEOUT_LISTENER=10