oracle/admin/pfile/initora817.ora自从被我弄过以后就提示错误ora-27123
#
# Copyright (c) 1991, 2000 by Oracle Corporation
#
##############################################################################
# Example INIT.ORA file
#
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
#
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
#
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
#
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
#
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
#
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
#
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
#
###############################################################################db_name = "ora817"
instance_name = ora817service_names = ora817# db_files = 80 # SMALL
# db_files = 400 # MEDIUM
# db_files = 1500 # LARGEcontrol_files = ("/home/oracle/oradata/ora817/control01.ctl", "/home/oracle/oradata/ora817/control02.ctl", "/home/oracle/oradata/ora817/control03.ctl")open_cursors = 300
max_enabled_roles = 30
# db_file_multiblock_read_count = 8 # SMALL
# db_file_multiblock_read_count = 16 # MEDIUM
# db_file_multiblock_read_count = 32 # LARGEdb_block_buffers = 98304 # INITIAL
# db_block_buffers = 100 # SMALL
# db_block_buffers = 550 # MEDIUM
# db_block_buffers = 3200 # LARGEshared_pool_size = 167772160 # INITIAL
# shared_pool_size = 3500000 # SMALL
# shared_pool_size = 5000000 # MEDIUM
# shared_pool_size = 9000000 # LARGElarge_pool_size = 614400
java_pool_size = 102400log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800processes = 512 # INITIAL
# processes = 50 # SMALL
# processes = 100 # MEDIUM
# processes = 200 # LARGElog_buffer = 1048576 # INITIAL
# log_buffer = 32768 # SMALL
# log_buffer = 32768 # MEDIUM
# log_buffer = 163840 # LARGE# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/home/oracle/admin/ora817/arch"
# log_archive_format = arch_%t_%s.arc# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/10 = 4:
# transactions = 40
# transactions_per_rollback_segment = 10# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true# define directories to store trace and alert files
background_dump_dest = /home/oracle/admin/ora817/bdump
core_dump_dest = /home/oracle/admin/ora817/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /home/oracle/admin/ora817/udumpdb_block_size = 8192remote_login_passwordfile = exclusiveos_authent_prefix = ""# The following parameters are needed for the Advanced Replication Option
job_queue_processes = 4
job_queue_interval = 60
distributed_transactions = 10
open_links = 200
mts_dispatchers = "(PROTOCOL=TCP)(SER=MODOSE)"
# Uncomment the following line when your listener is configured for SSL
#mts_dispatchers = "(PROTOCOL=TCPS)(SER=MODOSE)"mts_dispatchers = "(PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)"
# Uncomment the following line when your listener is configured for SSL
# (listener.ora and sqlnet.ora)
# mts_dispatchers = "(PROTOCOL=TCPS)(PRE=oracle.aurora.server.SGiopServer)"compatible = "8.1.0"
sort_area_size = 65536
sort_area_retained_size = 65536
#
# Copyright (c) 1991, 2000 by Oracle Corporation
#
##############################################################################
# Example INIT.ORA file
#
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
#
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
#
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
#
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
#
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
#
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
#
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
#
###############################################################################db_name = "ora817"
instance_name = ora817service_names = ora817# db_files = 80 # SMALL
# db_files = 400 # MEDIUM
# db_files = 1500 # LARGEcontrol_files = ("/home/oracle/oradata/ora817/control01.ctl", "/home/oracle/oradata/ora817/control02.ctl", "/home/oracle/oradata/ora817/control03.ctl")open_cursors = 300
max_enabled_roles = 30
# db_file_multiblock_read_count = 8 # SMALL
# db_file_multiblock_read_count = 16 # MEDIUM
# db_file_multiblock_read_count = 32 # LARGEdb_block_buffers = 98304 # INITIAL
# db_block_buffers = 100 # SMALL
# db_block_buffers = 550 # MEDIUM
# db_block_buffers = 3200 # LARGEshared_pool_size = 167772160 # INITIAL
# shared_pool_size = 3500000 # SMALL
# shared_pool_size = 5000000 # MEDIUM
# shared_pool_size = 9000000 # LARGElarge_pool_size = 614400
java_pool_size = 102400log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800processes = 512 # INITIAL
# processes = 50 # SMALL
# processes = 100 # MEDIUM
# processes = 200 # LARGElog_buffer = 1048576 # INITIAL
# log_buffer = 32768 # SMALL
# log_buffer = 32768 # MEDIUM
# log_buffer = 163840 # LARGE# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/home/oracle/admin/ora817/arch"
# log_archive_format = arch_%t_%s.arc# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/10 = 4:
# transactions = 40
# transactions_per_rollback_segment = 10# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true# define directories to store trace and alert files
background_dump_dest = /home/oracle/admin/ora817/bdump
core_dump_dest = /home/oracle/admin/ora817/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /home/oracle/admin/ora817/udumpdb_block_size = 8192remote_login_passwordfile = exclusiveos_authent_prefix = ""# The following parameters are needed for the Advanced Replication Option
job_queue_processes = 4
job_queue_interval = 60
distributed_transactions = 10
open_links = 200
mts_dispatchers = "(PROTOCOL=TCP)(SER=MODOSE)"
# Uncomment the following line when your listener is configured for SSL
#mts_dispatchers = "(PROTOCOL=TCPS)(SER=MODOSE)"mts_dispatchers = "(PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)"
# Uncomment the following line when your listener is configured for SSL
# (listener.ora and sqlnet.ora)
# mts_dispatchers = "(PROTOCOL=TCPS)(PRE=oracle.aurora.server.SGiopServer)"compatible = "8.1.0"
sort_area_size = 65536
sort_area_retained_size = 65536
解决方案 »
免费领取超大流量手机卡，每月29元包185G流量+100分钟通话, 中国电信官方发货