Dim Response As String, Reply As Integer, DateNow As String Dim first As String, Second As String, Third As String Dim Fourth As String, Fifth As String, Sixth As String Dim Seventh As String, Eighth As String Dim Start As Single, Tmr As SingleSub SendEmail(MailServerName As String, FromName As String, FromEmailAddress As String, ToName As String, ToEmailAddress As String, EmailSubject As String, EmailBodyOfMessage As String)
Winsock1.LocalPort = 0 ' Must set local port to 0 (Zero) or you can only send 1 e-mail pre program start
If Winsock1.State = sckClosed Then ' Check to see if socet is closed DateNow = Format(Date, "Ddd") & ", " & Format(Date, "dd Mmm YYYY") & " " & Format(Time, "hh:mm:ss") & "" & " -0600" first = "mail from:" + Chr(32) + FromEmailAddress + vbCrLf ' Get who's sending E-Mail address Second = "rcpt to:" + Chr(32) + ToEmailAddress + vbCrLf ' Get who mail is going to Third = "Date:" + Chr(32) + DateNow + vbCrLf ' Date when being sent Fourth = "From:" + Chr(32) + FromName + vbCrLf ' Who's Sending Fifth = "To:" + Chr(32) + ToNametxt + vbCrLf ' Who it going to Sixth = "Subject:" + Chr(32) + EmailSubject + vbCrLf ' Subject of E-Mail Seventh = EmailBodyOfMessage + vbCrLf ' E-mail message body Ninth = "X-Mailer: EBT Reporter v 2.x" + vbCrLf ' What program sent the e-mail, customize this Eighth = Fourth + Third + Ninth + Fifth + Sixth ' Combine for proper SMTP sending Winsock1.Protocol = sckTCPProtocol ' Set protocol for sending Winsock1.RemoteHost = MailServerName ' Set the server address Winsock1.RemotePort = 25 ' Set the SMTP Port Winsock1.Connect ' Start connection
StatusTxt.Caption = "Disconnecting" StatusTxt.Refresh WaitFor ("221") Winsock1.Close Else MsgBox (Str(Winsock1.State)) End If
End Sub Sub WaitFor(ResponseCode As String) Start = Timer ' Time event so won't get stuck in loop While Len(Response) = 0 Tmr = Start - Timer DoEvents ' Let System keep checking for incoming response **IMPORTANT** If Tmr > 50 Then ' Time in seconds to wait MsgBox "SMTP service error, timed out while waiting for response", 64, MsgTitle Exit Sub End If Wend While Left(Response, 3) <> ResponseCode DoEvents If Tmr > 50 Then MsgBox "SMTP service error, impromper response code. Code should have been: " + ResponseCode + " Code recieved: " + Response, 64, MsgTitle Exit Sub End If Wend Response = "" ' Sent response code to blank **IMPORTANT** End Sub Private Sub Command1_Click() SendEmail txtEmailServer.Text, txtFromName.Text, txtFromEmailAddress.Text, txtToEmailAddress.Text, txtToEmailAddress.Text, txtEmailSubject.Text, txtEmailBodyOfMessage.Text 'MsgBox ("Mail Sent") StatusTxt.Caption = "Mail Sent" StatusTxt.Refresh Beep
Close End SubPrivate Sub Command2_Click()
End
End SubPrivate Sub Winsock1_DataArrival(ByVal bytesTotal As Long) Winsock1.GetData Response ' Check for incoming response *IMPORTANT*End Sub
Smtp/Pop邮件的发送和接收
http://www.dapha.net/down/download.asp?downid=1&id=551
Dim first As String, Second As String, Third As String
Dim Fourth As String, Fifth As String, Sixth As String
Dim Seventh As String, Eighth As String
Dim Start As Single, Tmr As SingleSub SendEmail(MailServerName As String, FromName As String, FromEmailAddress As String, ToName As String, ToEmailAddress As String, EmailSubject As String, EmailBodyOfMessage As String)
Winsock1.LocalPort = 0 ' Must set local port to 0 (Zero) or you can only send 1 e-mail pre program start
If Winsock1.State = sckClosed Then ' Check to see if socet is closed
DateNow = Format(Date, "Ddd") & ", " & Format(Date, "dd Mmm YYYY") & " " & Format(Time, "hh:mm:ss") & "" & " -0600"
first = "mail from:" + Chr(32) + FromEmailAddress + vbCrLf ' Get who's sending E-Mail address
Second = "rcpt to:" + Chr(32) + ToEmailAddress + vbCrLf ' Get who mail is going to
Third = "Date:" + Chr(32) + DateNow + vbCrLf ' Date when being sent
Fourth = "From:" + Chr(32) + FromName + vbCrLf ' Who's Sending
Fifth = "To:" + Chr(32) + ToNametxt + vbCrLf ' Who it going to
Sixth = "Subject:" + Chr(32) + EmailSubject + vbCrLf ' Subject of E-Mail
Seventh = EmailBodyOfMessage + vbCrLf ' E-mail message body
Ninth = "X-Mailer: EBT Reporter v 2.x" + vbCrLf ' What program sent the e-mail, customize this
Eighth = Fourth + Third + Ninth + Fifth + Sixth ' Combine for proper SMTP sending Winsock1.Protocol = sckTCPProtocol ' Set protocol for sending
Winsock1.RemoteHost = MailServerName ' Set the server address
Winsock1.RemotePort = 25 ' Set the SMTP Port
Winsock1.Connect ' Start connection
WaitFor ("220")
StatusTxt.Caption = "Connecting...."
StatusTxt.Refresh
Winsock1.SendData ("HELO worldcomputers.com" + vbCrLf) WaitFor ("250") StatusTxt.Caption = "Connected"
StatusTxt.Refresh Winsock1.SendData (first) StatusTxt.Caption = "Sending Message"
StatusTxt.Refresh WaitFor ("250") Winsock1.SendData (Second) WaitFor ("250") Winsock1.SendData ("data" + vbCrLf)
WaitFor ("354")
Winsock1.SendData (Eighth + vbCrLf)
Winsock1.SendData (Seventh + vbCrLf)
Winsock1.SendData ("." + vbCrLf) WaitFor ("250") Winsock1.SendData ("quit" + vbCrLf)
StatusTxt.Caption = "Disconnecting"
StatusTxt.Refresh WaitFor ("221") Winsock1.Close
Else
MsgBox (Str(Winsock1.State))
End If
End Sub
Sub WaitFor(ResponseCode As String)
Start = Timer ' Time event so won't get stuck in loop
While Len(Response) = 0
Tmr = Start - Timer
DoEvents ' Let System keep checking for incoming response **IMPORTANT**
If Tmr > 50 Then ' Time in seconds to wait
MsgBox "SMTP service error, timed out while waiting for response", 64, MsgTitle
Exit Sub
End If
Wend
While Left(Response, 3) <> ResponseCode
DoEvents
If Tmr > 50 Then
MsgBox "SMTP service error, impromper response code. Code should have been: " + ResponseCode + " Code recieved: " + Response, 64, MsgTitle
Exit Sub
End If
Wend
Response = "" ' Sent response code to blank **IMPORTANT**
End Sub
Private Sub Command1_Click()
SendEmail txtEmailServer.Text, txtFromName.Text, txtFromEmailAddress.Text, txtToEmailAddress.Text, txtToEmailAddress.Text, txtEmailSubject.Text, txtEmailBodyOfMessage.Text
'MsgBox ("Mail Sent")
StatusTxt.Caption = "Mail Sent"
StatusTxt.Refresh
Beep
Close
End SubPrivate Sub Command2_Click()
End
End SubPrivate Sub Winsock1_DataArrival(ByVal bytesTotal As Long) Winsock1.GetData Response ' Check for incoming response *IMPORTANT*End Sub