自己想实现发送个tcp包(自定义以太网报头,IP报头,TCP报头)我用的是winpcap.但有一些不明白哦
1。IP包中版本号和首部长度定义一个字节,各分4位。怎么往里面填啊???2。我用pcap_sendpacket(fp,packet,len);发包。用什么能受到啊是不是pcap_loop(fp, 1, packet_handler, NULL);搞的不太明白哦。pack_handler是什么咚咚啊?3。哪位位高手有一些例子啊可以参考一下,多谢         

解决方案 »

  1.   

    1 直接填一个数就行了,你先分别计算出前4位和后四位,拼到一起就行了
    2 pack_handler是用来处理接收到数据包的函数指针,pcap_loop循环接收数据包,并且调用该指针所指的函数处理接收到的数据包
      

  2.   

    /*
     * Copyright (c) 1999 - 2002
     *  Politecnico di Torino.  All rights reserved.
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that: (1) source code distributions
     * retain the above copyright notice and this paragraph in its entirety, (2)
     * distributions including binary code include the above copyright notice and
     * this paragraph in its entirety in the documentation or other materials
     * provided with the distribution, and (3) all advertising materials mentioning
     * features or use of this software display the following acknowledgement:
     * ``This product includes software developed by the Politecnico
     * di Torino, and its contributors.'' Neither the name of
     * the University nor the names of its contributors may be used to endorse
     * or promote products derived from this software without specific prior
     * written permission.
     * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
     * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
     * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
     */#include "pcap.h"/* 4 bytes IP address */
    typedef struct ip_address{
        u_char byte1;
        u_char byte2;
        u_char byte3;
        u_char byte4;
    }ip_address;/* IPv4 header */
    typedef struct ip_header{
        u_char  ver_ihl;        // Version (4 bits) + Internet header length (4 bits)
        u_char  tos;            // Type of service 
        u_short tlen;           // Total length 
        u_short identification; // Identification
        u_short flags_fo;       // Flags (3 bits) + Fragment offset (13 bits)
        u_char  ttl;            // Time to live
        u_char  proto;          // Protocol
        u_short crc;            // Header checksum
        ip_address  saddr;      // Source address
        ip_address  daddr;      // Destination address
        u_int   op_pad;         // Option + Padding
    }ip_header;/* UDP header*/
    typedef struct udp_header{
        u_short sport;          // Source port
        u_short dport;          // Destination port
        u_short len;            // Datagram length
        u_short crc;            // Checksum
    }udp_header;/* prototype of the packet handler */
    void packet_handler(u_char *param, const struct pcap_pkthdr *header, const u_char *pkt_data);
    main()
    {
        pcap_if_t *alldevs;
        pcap_if_t *d;
        int inum;
        int i=0;
        pcap_t *adhandle;
        char errbuf[PCAP_ERRBUF_SIZE];
        u_int netmask;
        char packet_filter[] = "ip and udp";
        struct bpf_program fcode;
      
        /* Retrieve the device list */
        if (pcap_findalldevs(&alldevs, errbuf) == -1)
        {
            fprintf(stderr,"Error in pcap_findalldevs: %s\n", errbuf);
            exit(1);
        }
        
        /* Print the list */
        for(d=alldevs; d; d=d->next)
        {
            printf("%d. %s", ++i, d->name);
            if (d->description)
                printf(" (%s)\n", d->description);
            else
                printf(" (No description available)\n");
        }    if(i==0)
        {
            printf("\nNo interfaces found! Make sure WinPcap is installed.\n");
            return -1;
        }
        
        printf("Enter the interface number (1-%d):",i);
        scanf("%d", &inum);
        
        if(inum < 1 || inum > i)
        {
            printf("\nInterface number out of range.\n");
            /* Free the device list */
            pcap_freealldevs(alldevs);
            return -1;
        }    /* Jump to the selected adapter */
        for(d=alldevs, i=0; i< inum-1 ;d=d->next, i++);
        
        /* Open the adapter */
        if ( (adhandle= pcap_open_live(d->name, // name of the device
                                 65536,     // portion of the packet to capture. 
                                            // 65536 grants that the whole packet will be captured on all the MACs.
                                 1,         // promiscuous mode
                                 1000,      // read timeout
                                 errbuf     // error buffer
                                 ) ) == NULL)
        {
            fprintf(stderr,"\nUnable to open the adapter. %s is not supported by WinPcap\n");
            /* Free the device list */
            pcap_freealldevs(alldevs);
            return -1;
        }
        
        /* Check the link layer. We support only Ethernet for simplicity. */
        if(pcap_datalink(adhandle) != DLT_EN10MB)
        {
            fprintf(stderr,"\nThis program works only on Ethernet networks.\n");
            /* Free the device list */
            pcap_freealldevs(alldevs);
            return -1;
        }
        
        if(d->addresses != NULL)
            /* Retrieve the mask of the first address of the interface */
            netmask=((struct sockaddr_in *)(d->addresses->netmask))->sin_addr.S_un.S_addr;
        else
            /* If the interface is without addresses we suppose to be in a C class network */
            netmask=0xffffff; 
        //compile the filter
        if(pcap_compile(adhandle, &fcode, packet_filter, 1, netmask) <0 ){
            fprintf(stderr,"\nUnable to compile the packet filter. Check the syntax.\n");
            /* Free the device list */
            pcap_freealldevs(alldevs);
            return -1;
        }
        
        //set the filter
        if(pcap_setfilter(adhandle, &fcode)<0){
            fprintf(stderr,"\nError setting the filter.\n");
            /* Free the device list */
            pcap_freealldevs(alldevs);
            return -1;
        }
        
        printf("\nlistening on %s...\n", d->description);
        
        /* At this point, we don't need any more the device list. Free it */
        pcap_freealldevs(alldevs);
        
        /* start the capture */
        pcap_loop(adhandle, 0, packet_handler, NULL);
        
        return 0;
    }/* Callback function invoked by libpcap for every incoming packet */
    void packet_handler(u_char *param, const struct pcap_pkthdr *header, const u_char *pkt_data)
    {
        struct tm *ltime;
        char timestr[16];
        ip_header *ih;
        udp_header *uh;
        u_int ip_len;
        u_short sport,dport;    /* convert the timestamp to readable format */
        ltime=localtime(&header->ts.tv_sec);
        strftime( timestr, sizeof timestr, "%H:%M:%S", ltime);    /* print timestamp and length of the packet */
        printf("%s.%.6d len:%d ", timestr, header->ts.tv_usec, header->len);    /* retireve the position of the ip header */
        ih = (ip_header *) (pkt_data +
            14); //length of ethernet header    /* retireve the position of the udp header */
        ip_len = (ih->ver_ihl & 0xf) * 4;
        uh = (udp_header *) ((u_char*)ih + ip_len);    /* convert from network byte order to host byte order */
        sport = ntohs( uh->sport );
        dport = ntohs( uh->dport );    /* print ip addresses and udp ports */
        printf("%d.%d.%d.%d.%d -> %d.%d.%d.%d.%d\n",
            ih->saddr.byte1,
            ih->saddr.byte2,
            ih->saddr.byte3,
            ih->saddr.byte4,
            sport,
            ih->daddr.byte1,
            ih->daddr.byte2,
            ih->daddr.byte3,
            ih->daddr.byte4,
            dport);
    }这个例子是人家文档里的,你看看吧,还有什么我们在研究