m_CtrlCmb.GetLBText(m_CtrlCmb.GetCurSel(),m_StrSearchPlace);//列表框里选择的内容 OR m_CtrlCmb.GetWindowText(m_StrSearchPlace);//文本框里的内容
sigh,弄个CString的成员变量,UpdateData()一下不就有了吗?
1. 创建AppWizard工程文件设为toolbar,采用系统缺省设置。 2. 打开资源编辑器,选择工具条,在工具条中增加一个按钮,设置按钮 I D 为 I D_MY_COMBO_BOX 。 移动该按钮以使按钮处于适当的位置。 3. 从 C ToolBar 派 生出一个新类 C MyToolBar , 在 C MyToolBar 类 中增加一个成员变量 m_wndMyComboBox , 代码如下: class CMyToolBar : public CToolBar { public: CComboBox m_wndMyComboBox; }; 注意要将代码放在工程文件mainframe.h中“#endif // _MSC_VER > 1000”语句之后,类CMainFrame定义之前。 4. 将工程文件mainframe.h中的CToolBar变量m_wndToolBar用CMyToolBar变量m_wndToolBar代替。同时增加函数CreateMyComboToolBar()声明。代码如下: protected: // control bar embedded members CStatusBar m_wndStatusBar; CMyToolBar m_wndToolBar; int CreateMyComboToolBar();5. 在工程文件mainframe.cpp中的OnCreate()函数返回语句之前调用函数CreateMyToolBar();代码如下所示: if(!CreateMyComboToolBar()) MessageBox("Create My Combo ToolBar Failure");6. 以文本方式打开资源头文件resource.h,增加一个控制ID如下,注意该控制的ID值不要与其它控制或资源的ID值重复: #define IDC_MY_COMBO 1111 7. 在工程文件mainframe.cpp中增加函数CreateMyToolBar();代码如下: int MainFrame::CreateMyToolBar() { #define COMBO_BOX_WIDTH 80 //the width of the combo box //set up the ComboBox control as a select box //First get the index of the button's position in the toolbar int index = 0; CRecr rect; while(m_wndToolBar.GetItemID(index)! = ID_MY_COMBO_BOX) index++; //next convert that button to a seperator and get its position m_wndToolBar.SetButtonInfo(index, ID_MY_COMBO_BOX, TBBS_SEPARATOR, COMBO_BOX_WIDTH); m_wndToolBar.GetItemRect(index, &rect); //expand the rectangle to allow the combo box room to drop down rect.top+=2; rect.bottom += 200; // then .Create the combo box and show it if (!m_wndToolBar.m_ wndMyComboBox.Create( WS_CHILD|WS_VISIBLE | CBS_AUTOHSCROLL | CBS_DROPDOWNLIST | CBS_HASSTRINGS , rect, &m_wndToolBar, IDC_MY_COMBO)) { TRACE0("Failed to create combo-box\n"); return FALSE; } m_wndToolBar.m_wndMyComboBox.ShowWindow(SW_SHOW); //adding string to the combo box m_wndToolBar.m_wndMyComboBox.AddString("Fisrt Select"); m_wndToolBar.m_wndMyComboBox.AddString("Second Select"); m_wndToolBar.m_wndMyComboBox.AddString("Third Select"); m_wndToolBar.m_wndMyComboBox.AddString("Fourth Select"); m_wndToolBar.m_wndMyComboBox.AddString("Fifth Select"); m_wndToolBar.m_wndMyComboBox.SetCurSel(0); }
OR
m_CtrlCmb.GetWindowText(m_StrSearchPlace);//文本框里的内容
{
public:
CComboBox m_wndMyComboBox;
}; 注意要将代码放在工程文件mainframe.h中“#endif // _MSC_VER > 1000”语句之后,类CMainFrame定义之前。 4. 将工程文件mainframe.h中的CToolBar变量m_wndToolBar用CMyToolBar变量m_wndToolBar代替。同时增加函数CreateMyComboToolBar()声明。代码如下: protected: // control bar embedded members
CStatusBar m_wndStatusBar;
CMyToolBar m_wndToolBar;
int CreateMyComboToolBar();5. 在工程文件mainframe.cpp中的OnCreate()函数返回语句之前调用函数CreateMyToolBar();代码如下所示: if(!CreateMyComboToolBar())
MessageBox("Create My Combo ToolBar Failure");6. 以文本方式打开资源头文件resource.h,增加一个控制ID如下,注意该控制的ID值不要与其它控制或资源的ID值重复: #define IDC_MY_COMBO 1111 7. 在工程文件mainframe.cpp中增加函数CreateMyToolBar();代码如下: int MainFrame::CreateMyToolBar()
{
#define COMBO_BOX_WIDTH 80 //the width of the combo box
//set up the ComboBox control as a select box
//First get the index of the button's
position in the toolbar
int index = 0;
CRecr rect;
while(m_wndToolBar.GetItemID(index)!
= ID_MY_COMBO_BOX) index++;
//next convert that button to a
seperator and get its position
m_wndToolBar.SetButtonInfo(index,
ID_MY_COMBO_BOX, TBBS_SEPARATOR, COMBO_BOX_WIDTH);
m_wndToolBar.GetItemRect(index, &rect);
//expand the rectangle to allow the
combo box room to drop down
rect.top+=2;
rect.bottom += 200;
// then .Create the combo box and show it
if (!m_wndToolBar.m_ wndMyComboBox.Create(
WS_CHILD|WS_VISIBLE | CBS_AUTOHSCROLL |
CBS_DROPDOWNLIST | CBS_HASSTRINGS ,
rect, &m_wndToolBar, IDC_MY_COMBO))
{
TRACE0("Failed to create combo-box\n");
return FALSE;
}
m_wndToolBar.m_wndMyComboBox.ShowWindow(SW_SHOW);
//adding string to the combo box
m_wndToolBar.m_wndMyComboBox.AddString("Fisrt Select");
m_wndToolBar.m_wndMyComboBox.AddString("Second Select");
m_wndToolBar.m_wndMyComboBox.AddString("Third Select");
m_wndToolBar.m_wndMyComboBox.AddString("Fourth Select");
m_wndToolBar.m_wndMyComboBox.AddString("Fifth Select");
m_wndToolBar.m_wndMyComboBox.SetCurSel(0);
}