各位大侠，我最近又重新返回来移植android系统，只是出到android字幕那里就不往下运行了，本人对android系统也不熟悉，麻烦好心指导一下，看看是运行到哪里了，怎样解决，谢谢。下面是输出的log：
U-Boot SPL 2011.09-00000-g6035fc2 (Nov 16 2012 - 15:05:21)
Texas Instruments Revision detection unimplemented
Could not probe the EEPROM; something fundamentally wrong on the I2C bus.
read_eeprom() failure. continuing with ddr3
Could not probe the EEPROM; something fundamentally wrong on the I2C bus.
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.09-00000-g6035fc2 (Nov 16 2012 - 15:05:21)I2C: ready
DRAM: 256 MiB
WARNING: Caches not enabled
Could not probe the EEPROM; something fundamentally wrong on the I2C bus.
NAND: HW ECC Hamming Code selected
No NAND device found!!!
0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environmentNet: cpsw
Hit any key to stop autoboot: 0
SD/MMC found on device 0
reading uEnv.txt226 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
reading uImage4058640 bytes read
## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-3.2.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4058576 Bytes = 3.9 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OKStarting kernel ...Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 3.2.0 (root@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 Wed Jan 23 17:52:07 PST 2013
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: am335xevm
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] AM335X ES1.0 (sgx neon )
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyO0,115200n8 androidboot.console=ttyO0 mem=256M root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait rootdelay=1 init=/init ip=off
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 250248k/250248k available, 11896k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc074e000 (7448 kB)
[ 0.000000] .init : 0xc074e000 - 0xc07a4000 ( 344 kB)
[ 0.000000] .data : 0xc07a4000 - 0xc080bef0 ( 416 kB)
[ 0.000000] .bss : 0xc080bf14 - 0xc0961c50 (1368 kB)
[ 0.000000] NR_IRQS:396
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER2 at 25000000 Hz
[ 0.000000] OMAP clocksource: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000183] Calibrating delay loop... 743.83 BogoMIPS (lpj=3719168)
[ 0.040649] pid_max: default: 32768 minimum: 301
[ 0.040771] Security Framework initialized
[ 0.040832] Mount-cache hash table entries: 512
[ 0.041259] CPU: Testing write buffer coherency: ok
[ 0.041351] ftrace: allocating 21465 entries in 64 pages
[ 0.109252] omap_hwmod: pruss: failed to hardreset
[ 0.110076] print_constraints: dummy:
[ 0.110321] NET: Registered protocol family 16
[ 0.111450] OMAP GPIO hardware version 0.1
[ 0.112548] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.113861] omap_i2c.1: alias fck already exists
[ 0.114379] omap2_mcspi.1: alias fck already exists
[ 0.114501] omap2_mcspi.2: alias fck already exists
[ 0.114654] edma.0: alias fck already exists
[ 0.114685] edma.0: alias fck already exists
[ 0.114715] edma.0: alias fck already exists
[ 0.124877] bio: create slab <bio-0> at 0
[ 0.125854] SCSI subsystem initialized
[ 0.126739] usbcore: registered new interface driver usbfs
[ 0.126861] usbcore: registered new interface driver hub
[ 0.126983] usbcore: registered new device driver usb
[ 0.127136] musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3
[ 0.127288] musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1
[ 0.144836] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz
[ 0.146148] tps65910 1-002d: JTAGREVNUM 0x0
[ 0.148315] print_constraints: VRTC:
[ 0.149688] print_constraints: VIO: at 1800 mV
[ 0.151885] print_constraints: VDD1: 600 <--> 1500 mV at 1262 mV normal
[ 0.154113] print_constraints: VDD2: 600 <--> 1500 mV at 1137 mV normal
[ 0.154998] print_constraints: VDD3: 5000 mV
[ 0.156341] print_constraints: VDIG1: at 1800 mV
[ 0.157684] print_constraints: VDIG2: at 1800 mV
[ 0.158996] print_constraints: VPLL: at 1800 mV
[ 0.160339] print_constraints: VDAC: at 1800 mV
[ 0.161651] print_constraints: VAUX1: at 1800 mV
[ 0.162994] print_constraints: VAUX2: at 3300 mV
[ 0.164337] print_constraints: VAUX33: at 3300 mV
[ 0.165679] print_constraints: VMMC: at 3300 mV
[ 0.165985] tps65910 1-002d: No interrupt support, no core IRQ
[ 0.166503] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.167114] Bluetooth: Core ver 2.16
[ 0.167175] NET: Registered protocol family 31
[ 0.167205] Bluetooth: HCI device and connection manager initialized
[ 0.167205] Bluetooth: HCI socket layer initialized
[ 0.167236] Bluetooth: L2CAP socket layer initialized
[ 0.167266] Bluetooth: SCO socket layer initialized
[ 0.167480] Switching to clocksource gp timer
[ 0.185516] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.185699] musb-hdrc musb-hdrc.0: dma type: pio
[ 0.185913] MUSB0 controller's USBSS revision = 4ea20800
[ 0.186370] musb-hdrc musb-hdrc.0: USB OTG mode controller at d083c000 using PIO, IRQ 18
[ 0.186645] musb-hdrc musb-hdrc.1: dma type: pio
[ 0.186828] MUSB1 controller's USBSS revision = 4ea20800
[ 0.186950] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 0.187042] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ 0.187164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.187194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.187194] usb usb1: Product: MUSB HDRC host driver
[ 0.187225] usb usb1: Manufacturer: Linux 3.2.0 musb-hcd
[ 0.187225] usb usb1: SerialNumber: musb-hdrc.1
[ 0.187744] hub 1-0:1.0: USB hub found
[ 0.187744] hub 1-0:1.0: 1 port detected
[ 0.188293] musb-hdrc musb-hdrc.1: USB Host mode controller at d083e800 using PIO, IRQ 19
[ 0.188659] NET: Registered protocol family 2
[ 0.188873] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.189270] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.189422] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.189514] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.189544] TCP reno registered
[ 0.189544] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.189575] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.189788] NET: Registered protocol family 1
[ 0.190063] RPC: Registered named UNIX socket transport module.
[ 0.190093] RPC: Registered udp transport module.
[ 0.190093] RPC: Registered tcp transport module.
[ 0.190093] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.190368] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.302734] ashmem: initialized
[ 0.302978] VFS: Disk quotas dquot_6.5.2
[ 0.303039] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.303924] fuse init (API version 7.17)
[ 0.304168] msgmni has been set to 488
[ 0.305267] io scheduler noop registered
[ 0.305267] io scheduler deadline registered
[ 0.305358] io scheduler cfq registered (default)
[ 0.305969] Could not set LED4 to fully on
[ 0.307220] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
[ 0.977447] console [ttyO0] enabled
[ 0.981567] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
[ 0.989318] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
[ 0.997039] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3
[ 1.004791] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4
[ 1.012512] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5
[ 1.026275] brd: module loaded
[ 1.032684] loop: module loaded
[ 1.036163] i2c-core: driver [tsl2550] using legacy suspend method
[ 1.042724] i2c-core: driver [tsl2550] using legacy resume method
[ 1.049224] at24 1-0051: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
[ 1.108886] No daughter card found on AM335x EVM
[ 1.113800] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
[ 1.121154] AM335x:EVM Config Without Read E2PROM
android系统移植
U-Boot SPL 2011.09-00000-g6035fc2 (Nov 16 2012 - 15:05:21)
Texas Instruments Revision detection unimplemented
Could not probe the EEPROM; something fundamentally wrong on the I2C bus.
read_eeprom() failure. continuing with ddr3
Could not probe the EEPROM; something fundamentally wrong on the I2C bus.
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.09-00000-g6035fc2 (Nov 16 2012 - 15:05:21)I2C: ready
DRAM: 256 MiB
WARNING: Caches not enabled
Could not probe the EEPROM; something fundamentally wrong on the I2C bus.
NAND: HW ECC Hamming Code selected
No NAND device found!!!
0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environmentNet: cpsw
Hit any key to stop autoboot: 0
SD/MMC found on device 0
reading uEnv.txt226 bytes read
Loaded environment from uEnv.txt
Importing environment from mmc ...
Running uenvcmd ...
reading uImage4058640 bytes read
## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-3.2.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4058576 Bytes = 3.9 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OKStarting kernel ...Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 3.2.0 (root@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 Wed Jan 23 17:52:07 PST 2013
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: am335xevm
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] AM335X ES1.0 (sgx neon )
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyO0,115200n8 androidboot.console=ttyO0 mem=256M root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait rootdelay=1 init=/init ip=off
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 250248k/250248k available, 11896k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc074e000 (7448 kB)
[ 0.000000] .init : 0xc074e000 - 0xc07a4000 ( 344 kB)
[ 0.000000] .data : 0xc07a4000 - 0xc080bef0 ( 416 kB)
[ 0.000000] .bss : 0xc080bf14 - 0xc0961c50 (1368 kB)
[ 0.000000] NR_IRQS:396
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER2 at 25000000 Hz
[ 0.000000] OMAP clocksource: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000183] Calibrating delay loop... 743.83 BogoMIPS (lpj=3719168)
[ 0.040649] pid_max: default: 32768 minimum: 301
[ 0.040771] Security Framework initialized
[ 0.040832] Mount-cache hash table entries: 512
[ 0.041259] CPU: Testing write buffer coherency: ok
[ 0.041351] ftrace: allocating 21465 entries in 64 pages
[ 0.109252] omap_hwmod: pruss: failed to hardreset
[ 0.110076] print_constraints: dummy:
[ 0.110321] NET: Registered protocol family 16
[ 0.111450] OMAP GPIO hardware version 0.1
[ 0.112548] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.113861] omap_i2c.1: alias fck already exists
[ 0.114379] omap2_mcspi.1: alias fck already exists
[ 0.114501] omap2_mcspi.2: alias fck already exists
[ 0.114654] edma.0: alias fck already exists
[ 0.114685] edma.0: alias fck already exists
[ 0.114715] edma.0: alias fck already exists
[ 0.124877] bio: create slab <bio-0> at 0
[ 0.125854] SCSI subsystem initialized
[ 0.126739] usbcore: registered new interface driver usbfs
[ 0.126861] usbcore: registered new interface driver hub
[ 0.126983] usbcore: registered new device driver usb
[ 0.127136] musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3
[ 0.127288] musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1
[ 0.144836] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz
[ 0.146148] tps65910 1-002d: JTAGREVNUM 0x0
[ 0.148315] print_constraints: VRTC:
[ 0.149688] print_constraints: VIO: at 1800 mV
[ 0.151885] print_constraints: VDD1: 600 <--> 1500 mV at 1262 mV normal
[ 0.154113] print_constraints: VDD2: 600 <--> 1500 mV at 1137 mV normal
[ 0.154998] print_constraints: VDD3: 5000 mV
[ 0.156341] print_constraints: VDIG1: at 1800 mV
[ 0.157684] print_constraints: VDIG2: at 1800 mV
[ 0.158996] print_constraints: VPLL: at 1800 mV
[ 0.160339] print_constraints: VDAC: at 1800 mV
[ 0.161651] print_constraints: VAUX1: at 1800 mV
[ 0.162994] print_constraints: VAUX2: at 3300 mV
[ 0.164337] print_constraints: VAUX33: at 3300 mV
[ 0.165679] print_constraints: VMMC: at 3300 mV
[ 0.165985] tps65910 1-002d: No interrupt support, no core IRQ
[ 0.166503] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.167114] Bluetooth: Core ver 2.16
[ 0.167175] NET: Registered protocol family 31
[ 0.167205] Bluetooth: HCI device and connection manager initialized
[ 0.167205] Bluetooth: HCI socket layer initialized
[ 0.167236] Bluetooth: L2CAP socket layer initialized
[ 0.167266] Bluetooth: SCO socket layer initialized
[ 0.167480] Switching to clocksource gp timer
[ 0.185516] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.185699] musb-hdrc musb-hdrc.0: dma type: pio
[ 0.185913] MUSB0 controller's USBSS revision = 4ea20800
[ 0.186370] musb-hdrc musb-hdrc.0: USB OTG mode controller at d083c000 using PIO, IRQ 18
[ 0.186645] musb-hdrc musb-hdrc.1: dma type: pio
[ 0.186828] MUSB1 controller's USBSS revision = 4ea20800
[ 0.186950] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 0.187042] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ 0.187164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.187194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.187194] usb usb1: Product: MUSB HDRC host driver
[ 0.187225] usb usb1: Manufacturer: Linux 3.2.0 musb-hcd
[ 0.187225] usb usb1: SerialNumber: musb-hdrc.1
[ 0.187744] hub 1-0:1.0: USB hub found
[ 0.187744] hub 1-0:1.0: 1 port detected
[ 0.188293] musb-hdrc musb-hdrc.1: USB Host mode controller at d083e800 using PIO, IRQ 19
[ 0.188659] NET: Registered protocol family 2
[ 0.188873] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.189270] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.189422] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.189514] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.189544] TCP reno registered
[ 0.189544] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.189575] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.189788] NET: Registered protocol family 1
[ 0.190063] RPC: Registered named UNIX socket transport module.
[ 0.190093] RPC: Registered udp transport module.
[ 0.190093] RPC: Registered tcp transport module.
[ 0.190093] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.190368] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.302734] ashmem: initialized
[ 0.302978] VFS: Disk quotas dquot_6.5.2
[ 0.303039] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.303924] fuse init (API version 7.17)
[ 0.304168] msgmni has been set to 488
[ 0.305267] io scheduler noop registered
[ 0.305267] io scheduler deadline registered
[ 0.305358] io scheduler cfq registered (default)
[ 0.305969] Could not set LED4 to fully on
[ 0.307220] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
[ 0.977447] console [ttyO0] enabled
[ 0.981567] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
[ 0.989318] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
[ 0.997039] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3
[ 1.004791] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4
[ 1.012512] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5
[ 1.026275] brd: module loaded
[ 1.032684] loop: module loaded
[ 1.036163] i2c-core: driver [tsl2550] using legacy suspend method
[ 1.042724] i2c-core: driver [tsl2550] using legacy resume method
[ 1.049224] at24 1-0051: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
[ 1.108886] No daughter card found on AM335x EVM
[ 1.113800] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
[ 1.121154] AM335x:EVM Config Without Read E2PROM
android系统移植
[ 1.243011] Board name: A335ABCDE
[ 1.246490] Board version: 1.1A
[ 1.249816] SKU: SKU#01
[ 1.252532] The board is general purpose EVM in profile 0
[ 1.258697] da8xx_lcdc.0: alias fck already exists
[ 1.264160] da8xx_lcdc da8xx_lcdc.0: GLCD: Found NHD-4.3-ATXI#-T-1 panel
[ 1.280761] omap-gpmc omap-gpmc: GPMC revision 6.0
[ 1.285827] Registering NAND on CS0
[ 1.289947] omap_i2c.2: alias fck already exists
[ 1.308685] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 100 kHz
[ 1.314880] tsl2550 2-0039: standard operating mode
[ 1.320190] tsl2550: probe of 2-0039 failed with error -121
[ 1.326416] omap_hsmmc.0: alias fck already exists
[ 1.331756] omap_hsmmc.2: alias fck already exists
[ 1.337585] am335xevm: bt init
[ 1.341857] (stk) :sysfs entries created
[ 1.346038] (stk) : debugfs entries created
[ 1.350982] NFC Driver for TI WiLink
[ 1.355682] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.363006] omap2-nand driver initializing
[ 1.367675] No NAND device found
[ 1.371398] No NAND device found
[ 1.374847] OneNAND driver initializing
[ 1.379455] CAN device driver interface
[ 1.383483] CAN bus driver for Bosch D_CAN controller 1.0
[ 1.440124] davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
[ 1.446655] davinci_mdio davinci_mdio.0: no live phy, scanning all
[ 1.453369] davinci_mdio: probe of davinci_mdio.0 failed with error -5
[ 1.460296] PPP generic driver version 2.4.2
[ 1.464965] PPP BSD Compression module registered
[ 1.469940] PPP Deflate Compression module registered
[ 1.475372] usbcore: registered new interface driver cdc_ether
[ 1.481597] usbcore: registered new interface driver cdc_eem
[ 1.487609] usbcore: registered new interface driver dm9601
[ 1.493560] usbcore: registered new interface driver cdc_subset
[ 1.499847] cdc_ncm: 04-Aug-2011
[ 1.503295] usbcore: registered new interface driver cdc_ncm
[ 1.509338] usbcore: registered new interface driver cdc_acm
[ 1.515319] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.523742] Initializing USB Mass Storage driver...
[ 1.529022] usbcore: registered new interface driver usb-storage
[ 1.535339] USB Mass Storage support registered.
[ 1.540374] usbcore: registered new interface driver usbserial
[ 1.546539] USB Serial support registered for generic
[ 1.551940] usbcore: registered new interface driver usbserial_generic
[ 1.558837] usbserial: USB Serial Driver core
[ 1.563446] USB Serial support registered for GSM modem (1-port)
[ 1.569946] usbcore: registered new interface driver option
[ 1.575805] option: v0.7.2:USB Driver for GSM modems
[ 1.582946] gadget: Mass Storage Function, version: 2009/09/11
[ 1.589233] gadget: Number of LUNs=1
[ 1.593078] lun0: LUN: removable file: (no medium)
[ 1.598480] gadget: android_usb ready
[ 1.602478] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
[ 1.608123] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
[ 1.616058] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.623199] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.630828] usb usb2: Product: MUSB HDRC host driver
[ 1.636047] usb usb2: Manufacturer: Linux 3.2.0 musb-hcd
[ 1.641662] usb usb2: SerialNumber: musb-hdrc.0
[ 1.646942] hub 2-0:1.0: USB hub found
[ 1.650909] hub 2-0:1.0: 1 port detected
[ 1.655670] mousedev: PS/2 mouse device common for all mice
[ 1.662322] input: ti-tsc as /devices/platform/omap/ti_tscadc/tsc/input/input0
[ 1.670989] using rtc device, omap_rtc, for alarms
[ 1.675903] omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
[ 1.682891] i2c /dev entries driver
[ 1.686889] Linux video capture interface: v2.00
[ 1.692108] usbcore: registered new interface driver uvcvideo
[ 1.698150] USB Video Class driver (1.1.1)
[ 2.698791] omap_i2c omap_i2c.2: controller timed out
[ 2.718750] lm75: probe of 2-0048 failed with error -110
[ 3.730957] omap_i2c omap_i2c.2: controller timed out
[ 4.763092] omap_i2c omap_i2c.2: controller timed out
[ 5.795227] omap_i2c omap_i2c.2: controller timed out
[ 6.827392] omap_i2c omap_i2c.2: controller timed out
[ 7.859527] omap_i2c omap_i2c.2: controller timed out
[ 8.891662] omap_i2c omap_i2c.2: controller timed out
[ 9.923797] omap_i2c omap_i2c.2: controller timed out
[ 9.949676] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 9.956237] device-mapper: uevent: version 1.0.3
[ 9.961334] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 9.970245] Bluetooth: HCI UART driver ver 2.2
[ 9.974945] Bluetooth: HCI H4 protocol initialized
[ 9.979980] Bluetooth: HCILL protocol initialized
[ 9.984954] Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
[ 9.996643] cpuidle: using governor ladder
[ 10.001159] cpuidle: using governor menu
[ 10.009094] usbcore: registered new interface driver usbhid
[ 10.014984] usbhid: USB HID core driver
[ 10.128417] logger: created 256K log 'log_main'
[ 10.133361] logger: created 256K log 'log_events'
[ 10.138458] logger: created 256K log 'log_radio'
[ 10.143402] logger: created 256K log 'log_system'
[ 10.148895] usbcore: registered new interface driver snd-usb-audio
[ 10.156311] ALSA device list:
[ 10.159484] No soundcards found.
[ 10.163055] oprofile: hardware counters not available
[ 10.168395] oprofile: using timer interrupt.
[ 10.173065] Netfilter messages via NETLINK v0.30.
[ 10.178131] nf_conntrack version 0.5.0 (3910 buckets, 15640 max)
[ 10.184844] ctnetlink v0.93: registering with nfnetlink.
[ 10.190551] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 10.197875] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 10.204406] xt_time: kernel timezone is -0000
[ 10.209259] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.215087] arp_tables: (C) 2002 David S. Miller
[ 10.220031] TCP cubic registered
[ 10.223632] NET: Registered protocol family 10
[ 10.229187] Mobile IPv6
[ 10.231811] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.237701] IPv6 over IPv4 tunneling driver
[ 10.242797] NET: Registered protocol family 17
[ 10.247497] NET: Registered protocol family 15
[ 10.252227] can: controller area network core (rev 20090105 abi 8)
[ 10.258880] NET: Registered protocol family 29
[ 10.263580] can: raw protocol (rev 20090105)
[ 10.268066] can: broadcast manager protocol (rev 20090105 t)
[ 10.274505] Bluetooth: RFCOMM TTY layer initialized
[ 10.279693] Bluetooth: RFCOMM socket layer initialized
[ 10.285125] Bluetooth: RFCOMM ver 1.11
[ 10.289093] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.294677] Bluetooth: BNEP filters: protocol multicast
[ 10.300201] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 10.306610] Registering the dns_resolver key type
[ 10.311676] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 10.319763] ThumbEE CPU extension supported.
[ 10.324310] mux: Failed to setup hwmod io irq -22
[ 10.329956] Power Management for AM33XX family
[ 10.334838] Trying to load am335x-pm-firmware.bin (60 secs timeout)
[ 10.341583] Copied the M3 firmware to UMEM
[ 10.349670] clock: disabling unused clocks to save power
[ 10.356811] Detected MACID=d4:94:a1:39:71:13
[ 10.362670] omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:09 UTC (946684809)
[ 10.371887] Waiting 1sec before mounting root device...
[ 10.464324] mmc0: new SDHC card at address e624
[ 10.469665] mmcblk0: mmc0:e624 SD08G 7.40 GiB
[ 10.479370] mmcblk0: p1 p2 p3
[ 11.119812] (stk) :line disc installation timed out
[ 13.241424] (stk) :line disc installation timed out
[ 15.298980] EXT4-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
[ 15.311981] EXT4-fs (mmcblk0p2): recovery complete
[ 15.360412] (stk) :line disc installation timed out
[ 15.418670] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 15.427490] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 15.434356] Freeing init memory: 344K
[ 15.473327] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[ 15.613098] init: cannot open '/initlogo.rle'
[ 15.690277] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[ 15.707916] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 15.843841] android_usb: already disabled
[ 15.848358] mtp_bind_config
[ 15.851440] adb_bind_config
[ 15.945007] adb_open
root@android:/ # [ 16.279602] Disabling lock debugging due to kernel taint
[ 17.479614] (stk) :line disc installation timed out
[ 19.599609] (stk) :line disc installation timed out
[ 21.719726] (stk) :line disc installation timed out
[ 22.719787] Bluetooth: st_register failed -22
[ 30.817016] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[ 41.428680] PHY 0:00 not found
[ 41.431976] PHY 0:01 not found
[ 41.438446] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 43.050964] binder: send failed reply for transaction 1670 to 229:272
[ 68.012512] binder: send failed reply for transaction 3035 to 229:243