开机自动执行脚本问题请教

Question

各位大侠, 调试时, 我每次都要用终端仿真器输入
su
setprop service.adb.tcp.port 5555 
stop adbd 
start adbd 
怎样设定开机自动执行? 网上搜寻说修改/system/etc/install-recovery.sh, 但无法修改.

Answer 1

su
setprop service.adb.tcp.port 5555 
stop adbd 
start adbd 放到init.rc哪个位置?

Answer 2

1、将 service.adb.tcp.port=5555 写入到 /system/build.prop 文件中；
2、开启 设置 中的 USB调试；
3、重启系统。

Answer 3

# Define TCP buffer sizes for various networks
#   ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax,
    setprop net.tcp.buffersize.default 4096,87380,110208,4096,16384,110208
    setprop net.tcp.buffersize.wifi    524288,1048576,2097152,262144,524288,1048576
    setprop net.tcp.buffersize.lte     524288,1048576,2097152,262144,524288,1048576
    setprop net.tcp.buffersize.umts    4094,87380,110208,4096,16384,110208
    setprop net.tcp.buffersize.hspa    4094,87380,262144,4096,16384,262144
    setprop net.tcp.buffersize.hsupa   4094,87380,262144,4096,16384,262144
    setprop net.tcp.buffersize.hsdpa   4094,87380,262144,4096,16384,262144
    setprop net.tcp.buffersize.hspap   4094,87380,1220608,4096,16384,1220608
    setprop net.tcp.buffersize.edge    4093,26280,35040,4096,16384,35040
    setprop net.tcp.buffersize.gprs    4092,8760,11680,4096,8760,11680
    setprop net.tcp.buffersize.evdo    4094,87380,262144,4096,16384,262144# Set this property so surfaceflinger is not started by system_init
    setprop system_init.startsurfaceflinger 0
这是从init.rc里面摘的,你就放他们下面...
楼上的方法应该可以

Answer 4

qudaicheng, build.prop 改后连系统都进不去了,我用的是tplink小白

Answer 5

改了init.rc, 但重启后又恢复改前了.