怎么求得硬盘序列号 怎么求得硬盘序列号 解决方案 » 免费领取超大流量手机卡,每月29元包185G流量+100分钟通话, 中国电信官方发货 interfaceuses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, StdCtrls;type TForm2 = class(TForm) Button1: TButton; Edit1: TEdit; Button2: TButton; Edit2: TEdit; procedure Button1Click(Sender: TObject); private { Private declarations } public { Public declarations } end;var Form2: TForm2;implementation{$R *.dfm}function GetIdeSerialNumber: pchar; //获取硬盘的出厂系列号; const IDENTIFY_BUFFER_SIZE = 512; type TIDERegs = packed record bFeaturesReg: BYTE; // Used for specifying SMART "commands". bSectorCountReg: BYTE; // IDE sector count register bSectorNumberReg: BYTE;// IDE sector number register bCylLowReg: BYTE; // IDE low order cylinder value bCylHighReg: BYTE; // IDE high order cylinder value bDriveHeadReg: BYTE; // IDE drive/head register bCommandReg: BYTE; // Actual IDE command. bReserved: BYTE; // reserved for future use. Must be zero. end; TSendCmdInParams = packed record cBufferSize: DWORD; // Buffer size in bytes irDriveRegs: TIDERegs; // Structure with drive register values. bDriveNumber: BYTE; // Physical drive number to send command to (0,1,2,3). bReserved: array[0..2] of Byte; dwReserved: array[0..3] of DWORD; bBuffer: array[0..0] of Byte; // Input buffer. end; TIdSector = packed record wGenConfig: Word; wNumCyls: Word; wReserved: Word; wNumHeads: Word; wBytesPerTrack: Word; wBytesPerSector: Word; wSectorsPerTrack: Word; wVendorUnique: array[0..2] of Word; sSerialNumber: array[0..19] of CHAR; wBufferType: Word; wBufferSize: Word; wECCSize: Word; sFirmwareRev: array[0..7] of Char; sModelNumber: array[0..39] of Char; wMoreVendorUnique: Word; wDoubleWordIO: Word; wCapabilities: Word; wReserved1: Word; wPIOTiming: Word; wDMATiming: Word; wBS: Word; wNumCurrentCyls: Word; wNumCurrentHeads: Word; wNumCurrentSectorsPerTrack: Word; ulCurrentSectorCapacity: DWORD; wMultSectorStuff: Word; ulTotalAddressableSectors: DWORD; wSingleWordDMA: Word; wMultiWordDMA: Word; bReserved: array[0..127] of BYTE; end; PIdSector = ^TIdSector; TDriverStatus = packed record bDriverError: Byte; // 驱动器返回的错误代码,无错则返回0 bIDEStatus: Byte; // IDE出错寄存器的内容,只有当bDriverError 为 SMART_IDE_ERROR 时有效 bReserved: array[0..1] of Byte; dwReserved: array[0..1] of DWORD; end; TSendCmdOutParams = packed record cBufferSize: DWORD; // bBuffer的大小 DriverStatus: TDriverStatus; // 驱动器状态 bBuffer: array[0..0] of BYTE;// 用于保存从驱动器读出的数据的缓冲区,实际长度由cBufferSize决定 end;var hDevice: Thandle; cbBytesReturned: DWORD; SCIP: TSendCmdInParams; aIdOutCmd: array[0..(SizeOf(TSendCmdOutParams) + IDENTIFY_BUFFER_SIZE-1)-1] of Byte; IdOutCmd: TSendCmdOutParams absolute aIdOutCmd; procedure ChangeByteOrder(var Data; Size: Integer); var ptr: Pchar; i: Integer; c: Char; begin ptr := @Data; for I := 0 to (Size shr 1) - 1 do begin c := ptr^; ptr^ := (ptr + 1)^; (ptr + 1)^ := c; Inc(ptr, 2); end; end;begin Result := '';// 如果出错则返回空串 if SysUtils.Win32Platform = VER_PLATFORM_WIN32_NT then begin // Windows NT, Windows 2000 hDevice := CreateFile('\\.\PhysicalDrive0', GENERIC_READ or GENERIC_WRITE, // 提示! 改变名称可适用于其它驱动器,如第二个驱动器: '\\.\PhysicalDrive1\' FILE_SHARE_READ or FILE_SHARE_WRITE, nil, OPEN_EXISTING, 0, 0); end else // Version Windows 95 OSR2, Windows 98 hDevice := CreateFile('\\.\SMARTVSD', 0, 0, nil, CREATE_NEW, 0, 0); if hDevice = INVALID_HANDLE_VALUE then Exit; try FillChar(SCIP, SizeOf(TSendCmdInParams) - 1, #0); FillChar(aIdOutCmd, SizeOf(aIdOutCmd), #0); cbBytesReturned := 0; with SCIP do// Set up data structures for IDENTIFY command. begin cBufferSize := IDENTIFY_BUFFER_SIZE; //bDriveNumber := 0; with irDriveRegs do begin bSectorCountReg := 1; bSectorNumberReg := 1; //if Win32Platform=VER_PLATFORM_WIN32_NT then bDriveHeadReg := $A0 //else bDriveHeadReg := $A0 or ((bDriveNum and 1) shl 4); bDriveHeadReg := $A0; bCommandReg := $EC; end; end; if not DeviceIoControl(hDevice, $0007C088, @SCIP, SizeOf(TSendCmdInParams) - 1, @aIdOutCmd, SizeOf(aIdOutCmd), cbBytesReturned, nil) then Exit; finally CloseHandle(hDevice); end; with PIdSector(@IdOutCmd.bBuffer)^ do begin ChangeByteOrder(sSerialNumber, SizeOf(sSerialNumber)); (Pchar(@sSerialNumber) + SizeOf(sSerialNumber))^:= #0; Result := Pchar(@sSerialNumber); end;end;procedure TForm2.Button1Click(Sender: TObject);beginEdit1.text:=GetIdeSerialNumber;end;end. quick report不可以放多个detail吗? 求救,一个菜鸟问题??? 请问大家在什么系统平台下做开发呀 请问 如何 设置 cxgrid 的 列头 和 滚动条 设置为 3D 的样式 ????????????急!!!!! 借人气一问:水晶报表里可有微调的功能?字段对不齐了 怎样建立在delphi 下建立 ado的stream对象 我想在网上下载第三方控件,请问可以从哪个网站上下载呢? 简单问题 ,送分了 500分求一数学解析式! 关于BDE中dbase版本设置问题??? 请教FastReport3中打印图片的问题 如何合并两个popupmenu?
Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
Dialogs, StdCtrls;type
TForm2 = class(TForm)
Button1: TButton;
Edit1: TEdit;
Button2: TButton;
Edit2: TEdit;
procedure Button1Click(Sender: TObject);
private
{ Private declarations }
public
{ Public declarations }
end;var
Form2: TForm2;implementation{$R *.dfm}
function GetIdeSerialNumber: pchar; //获取硬盘的出厂系列号;
const IDENTIFY_BUFFER_SIZE = 512;
type
TIDERegs = packed record
bFeaturesReg: BYTE; // Used for specifying SMART "commands".
bSectorCountReg: BYTE; // IDE sector count register
bSectorNumberReg: BYTE;// IDE sector number register
bCylLowReg: BYTE; // IDE low order cylinder value
bCylHighReg: BYTE; // IDE high order cylinder value
bDriveHeadReg: BYTE; // IDE drive/head register
bCommandReg: BYTE; // Actual IDE command.
bReserved: BYTE; // reserved for future use. Must be zero.
end;
TSendCmdInParams = packed record
cBufferSize: DWORD; // Buffer size in bytes
irDriveRegs: TIDERegs; // Structure with drive register values.
bDriveNumber: BYTE; // Physical drive number to send command to (0,1,2,3).
bReserved: array[0..2] of Byte;
dwReserved: array[0..3] of DWORD;
bBuffer: array[0..0] of Byte; // Input buffer.
end;
TIdSector = packed record
wGenConfig: Word;
wNumCyls: Word;
wReserved: Word;
wNumHeads: Word;
wBytesPerTrack: Word;
wBytesPerSector: Word;
wSectorsPerTrack: Word;
wVendorUnique: array[0..2] of Word;
sSerialNumber: array[0..19] of CHAR;
wBufferType: Word;
wBufferSize: Word;
wECCSize: Word;
sFirmwareRev: array[0..7] of Char;
sModelNumber: array[0..39] of Char;
wMoreVendorUnique: Word;
wDoubleWordIO: Word;
wCapabilities: Word;
wReserved1: Word;
wPIOTiming: Word;
wDMATiming: Word;
wBS: Word;
wNumCurrentCyls: Word;
wNumCurrentHeads: Word;
wNumCurrentSectorsPerTrack: Word;
ulCurrentSectorCapacity: DWORD;
wMultSectorStuff: Word;
ulTotalAddressableSectors: DWORD;
wSingleWordDMA: Word;
wMultiWordDMA: Word;
bReserved: array[0..127] of BYTE;
end;
PIdSector = ^TIdSector;
TDriverStatus = packed record
bDriverError: Byte; // 驱动器返回的错误代码,无错则返回0
bIDEStatus: Byte; // IDE出错寄存器的内容,只有当bDriverError 为 SMART_IDE_ERROR 时有效
bReserved: array[0..1] of Byte;
dwReserved: array[0..1] of DWORD;
end;
TSendCmdOutParams = packed record
cBufferSize: DWORD; // bBuffer的大小
DriverStatus: TDriverStatus; // 驱动器状态
bBuffer: array[0..0] of BYTE;// 用于保存从驱动器读出的数据的缓冲区,实际长度由cBufferSize决定
end;
var
hDevice: Thandle;
cbBytesReturned: DWORD;
SCIP: TSendCmdInParams;
aIdOutCmd: array[0..(SizeOf(TSendCmdOutParams) + IDENTIFY_BUFFER_SIZE-1)-1] of Byte;
IdOutCmd: TSendCmdOutParams absolute aIdOutCmd;
procedure ChangeByteOrder(var Data; Size: Integer);
var
ptr: Pchar;
i: Integer;
c: Char;
begin
ptr := @Data;
for I := 0 to (Size shr 1) - 1 do
begin
c := ptr^;
ptr^ := (ptr + 1)^;
(ptr + 1)^ := c;
Inc(ptr, 2);
end;
end;
begin
Result := '';// 如果出错则返回空串
if SysUtils.Win32Platform = VER_PLATFORM_WIN32_NT then
begin // Windows NT, Windows 2000
hDevice := CreateFile('\\.\PhysicalDrive0', GENERIC_READ or GENERIC_WRITE, // 提示! 改变名称可适用于其它驱动器,如第二个驱动器: '\\.\PhysicalDrive1\'
FILE_SHARE_READ or FILE_SHARE_WRITE, nil, OPEN_EXISTING, 0, 0);
end
else // Version Windows 95 OSR2, Windows 98
hDevice := CreateFile('\\.\SMARTVSD', 0, 0, nil, CREATE_NEW, 0, 0);
if hDevice = INVALID_HANDLE_VALUE then Exit;
try
FillChar(SCIP, SizeOf(TSendCmdInParams) - 1, #0);
FillChar(aIdOutCmd, SizeOf(aIdOutCmd), #0);
cbBytesReturned := 0;
with SCIP do// Set up data structures for IDENTIFY command.
begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
//bDriveNumber := 0;
with irDriveRegs do
begin
bSectorCountReg := 1;
bSectorNumberReg := 1;
//if Win32Platform=VER_PLATFORM_WIN32_NT then bDriveHeadReg := $A0
//else bDriveHeadReg := $A0 or ((bDriveNum and 1) shl 4);
bDriveHeadReg := $A0;
bCommandReg := $EC;
end;
end;
if not DeviceIoControl(hDevice, $0007C088, @SCIP, SizeOf(TSendCmdInParams) - 1,
@aIdOutCmd, SizeOf(aIdOutCmd), cbBytesReturned, nil) then Exit;
finally
CloseHandle(hDevice);
end;
with PIdSector(@IdOutCmd.bBuffer)^ do
begin
ChangeByteOrder(sSerialNumber, SizeOf(sSerialNumber));
(Pchar(@sSerialNumber) + SizeOf(sSerialNumber))^:= #0;
Result := Pchar(@sSerialNumber);
end;
end;procedure TForm2.Button1Click(Sender: TObject);
begin
Edit1.text:=GetIdeSerialNumber;
end;end.