from 表名!
Alter Table 表名 Add Column 语文 类型 [选项]
Alter Table 表名 Drop Column 语文附：
SyntaxALTER TABLE TableName1
ADD | ALTER [COLUMN] FieldName1
FieldType [(nFieldWidth [, nPrecision])]
[NULL | NOT NULL]
[CHECK lExpression1 [ERROR cMessageText1]]
[DEFAULT eExpression1]
[PRIMARY KEY | UNIQUE]
[REFERENCES TableName2 [TAG TagName1]]
[NOCPTRANS]
[NOVALIDATE]
-or-
ALTER TABLE TableName1
ALTER [COLUMN] FieldName2
[NULL | NOT NULL]
[SET DEFAULT eExpression2]
[SET CHECK lExpression2 [ERROR cMessageText2]]
[DROP DEFAULT]
[DROP CHECK]
[NOVALIDATE]
-or-
ALTER TABLE TableName1
[DROP [COLUMN] FieldName3]
[SET CHECK lExpression3 [ERROR cMessageText3]]
[DROP CHECK]
[ADD PRIMARY KEY eExpression3 TAG TagName2 [FOR lExpression4]]
[DROP PRIMARY KEY]
[ADD UNIQUE eExpression4 [TAG TagName3 [FOR lExpression5]]]
[DROP UNIQUE TAG TagName4]
[ADD FOREIGN KEY [eExpression5] TAG TagName4 [FOR lExpression6]
REFERENCES TableName2 [TAG TagName5]]
[DROP FOREIGN KEY TAG TagName6 [SAVE]]
[RENAME COLUMN FieldName4 TO FieldName5]
[NOVALIDATE]ArgumentsTableName1Specifies the name of the table whose structure is modified.ADD [COLUMN] FieldName1Specifies the name of the field to add. A single table can contain up to 255 fields. If one or more fields allow null values, the limit is reduced by one to 254 fields.ALTER [COLUMN] FieldName1Specifies the name of an existing field to modify.FieldType [(nFieldWidth [, nPrecision])]Specifies the field type, field width, and field precision (number of decimal places) for a new or modified field.FieldType is a single letter indicating the field's data type. Some field data types require that you specify nFieldWidth or nPrecision or both.The following table lists the values for FieldType and indicates whether nFieldWidth and nPrecision are required:FieldType nFieldWidth nPrecision Description
C n – Character field of width n
D – – Date
T – – DateTime
N n d Numeric field of width n with d decimal places
F n d Floating numeric field of width n with d decimal places
I – – Integer
B – d Double
Y – – Currency
L – – Logical
M – – Memo
G – – General
P – – Picture
nFieldWidth and nPrecision are ignored for D, T, I, Y, L, M, G, and P types. nPrecision defaults to zero (no decimal places) if nPrecision isn't included for the N, F, or B types.NULL | NOT NULLAllows or precludes null values in the field. If one or more fields can contain null values, the maximum number of fields the table can contain is reduced by one, from 255 to 254.If you omit NULL and NOT NULL, the current setting of SET NULL determines whether null values are allowed in the field. However, if you omit NULL and NOT NULL and include the PRIMARY KEY or UNIQUE clause, the current setting of SET NULL is ignored and the field defaults to NOT NULL.CHECK lExpression1Specifies a validation rule for the field. lExpression1 must evaluate to a logical expression; it can be a user-defined function or a stored procedure. When a blank record is appended, the validation rule is checked. An error is generated if the validation rule doesn't allow for a blank field value in an appended record.ERROR cMessageText1Specifies the error message displayed when the field validation rule generates an error. The message is displayed only when data is changed within a Browse or Edit window.DEFAULT eExpression1Specifies a default value for the field. The data type of eExpression1 must be the same as the data type for the field.PRIMARY KEYCreates a primary index tag. The index tag has the same name as the field.UNIQUECreates a candidate index tag with the same name as the field. For more information about candidate indexes, see Chapter 7, Working with Tables, in the Programmer's Guide.Note Candidate indexes (created by including the UNIQUE option, provided for ANSI compatibility in ALTER TABLE or CREATE TABLE) are not the same as indexes created with the UNIQUE option in the INDEX command. An index created with UNIQUE in the INDEX command allows duplicate index keys; candidate indexes do not allow duplicate index keys.Null values and duplicate records are not permitted in a field used for a primary or candidate index.If you are creating a new field with ADD COLUMN, Microsoft Visual FoxPro will not generate an error if you create a primary or candidate index for a field that supports null values. However, Visual FoxPro will generate an error if you attempt to enter a null or duplicate value into a field used for a primary or candidate index.If you are modifying an existing field and the primary or candidate index expression consists of fields in the table, Visual FoxPro checks the fields to see if they contain null values or duplicate records. If they do, Visual FoxPro generates an error and the table is not altered.REFERENCES TableName2 TAG TagName1Specifies the parent table to which a persistent relationship is established. TAG TagName1 specifies the parent table's index tag on which the relationship is based. Index tag names can contain up to 10 characters.NOCPTRANSPrevents translation to a different code page for character and memo fields. If the table is converted to another code page, the fields for which NOCPTRANS has been specified are not translated. NOCPTRANS can only be specified for character and memo fields.The following example creates a table named MYTABLE containing two character fields and two memo fields. The second character field char2 and the second memo field memo2 include NOCPTRANS to prevent translation.CREATE TABLE mytable (char1 C(10), char2 C(10) NOCPTRANS,;
memo1 M, memo2 M NOCPTRANS)ALTER [COLUMN] FieldName2Specifies the name of an existing field to modify. Note that multiple ALTER COLUMN clauses are required to change more than one property of a field in a single ALTER TABLE command. See the ALTER TABLE examples to see how the ALTER COLUMN clauses are structured.SET DEFAULT eExpression2Specifies a new default value for an existing field. The data type of eExpression2 must be the same as the data type for the field.SET CHECK lExpression2Specifies a new validation rule for an existing field. lExpression2 must evaluate to a logical expression, and may be a user-defined function or a stored procedure.ERROR cMessageText2Specifies the error message displayed when the field validation rule generates an error. The message is displayed only when data is changed within a Browse or Edit window.DROP DEFAULTRemoves the default value for an existing field.DROP CHECKRemoves the validation rule for an existing field.DROP [COLUMN] FieldName3Specifies a field to remove from the table. Removing a field from the table also removes the field's default value setting and field validation rule.If index key or trigger expressions reference the field, the expressions become invalid when the field is removed. In this case, an error isn't generated when the field is removed, but the invalid index key or trigger expressions will generate errors at run time.SET CHECK lExpression3Specifies the table validation rule. lExpression3 must evaluate to a logical expression; it can be a user-defined function or a stored procedure.ERROR cMessageText3Specifies the error message displayed when the table validation rule generates an error. The message is displayed only when data is changed within a Browse or Edit window.DROP CHECKRemoves the table's validation rule.ADD PRIMARY KEY eExpression3 TAG TagName2 [FOR lExpression4]Adds a primary index to the table. eExpression3 specifies the primary index key expression; TagName2 specifies the name of the primary index tag. Index tag names can contain up to 10 characters. If TAG TagName2 is omitted and eExpression3 is a single field, the primary index tag has the same name as the field specified in eExpression3.Include FOR lExpression4 to specify a condition whereby only records that satisfy the filter expression lExpression4 are available for display and access; primary index keys are created in the index file for just those records matching the filter expression. Note that you should avoid using the FOR clause to create a primary index; the uniqueness of a primary key is only enforced for those records that match the condition specified with FOR lExpression4. Instead, use the INDEX command with a FOR clause to create a filtered index.Rushmore optimizes an ALTER TABLE ... FOR lExpression4 command if lExpression4 is an optimizable expression. For best performance, use an optimizable expression in the FOR clause.For more information, see SET OPTIMIZE and "Understanding Rushmore Technology" in Chapter 15, Optimizing Applications, in the Programmer's Guide.DROP PRIMARY KEYRemoves the primary index and its index tag. Because a table can have only one primary key, it isn't necessary to specify the name of the primary key. Removing the primary index also deletes any persistent relations based on the primary key.ADD UNIQUE eExpression4 [TAG TagName3 [FOR lExpression5]]Adds a candidate index to the table. eExpression4 specifies the candidate index key expression; TagName3 specifies the name of the candidate index tag. Index tag names can contain up to 10 characters. If you omit TAG TagName3, and if eExpression4 is a single field, the candidate index tag has the same name as the field specified in eExpression4.Include FOR lExpression5 to specify a condition whereby only records that satisfy the filter expression lExpression5 are available for display and access; candidate index keys are created in the index file for just those records matching the filter expression.Rushmore optimizes an ALTER TABLE ... FOR lExpression5 command if lExpression5 is an optimizable expression. For best performance, use an optimizable expression in the FOR clause.For more information, see SET OPTIMIZE and "Understanding Rushmore Technology" in Chapter 15, Optimizing Applications, in the Programmer's Guide.DROP UNIQUE TAG TagName4Removes the candidate index and its index tag. Because a table can have multiple candidate keys, you must specify the name of the candidate index tag.ADD FOREIGN KEY [eExpression5] TAG TagName4 [FOR lExpression6]Adds a foreign (non-primary) index to the table. eExpression5 specifies the foreign index key expression and TagName4 specifies the name of the foreign index tag. Index tag names can contain up to 10 characters.Include FOR lExpression6 to specify a condition whereby only records that satisfy the filter expression lExpression6 are available for display and access; foreign index keys are created in the index file for just those records matching the filter expression.Rushmore optimizes an ALTER TABLE ... FOR lExpression6 command if lExpression6 is an optimizable expression. For best performance, use an optimizable expression in the FOR clause.For more information, see SET OPTIMIZE and "Understanding Rushmore Technology" in Chapter 15, Optimizing Applications, in the Programmer's Guide.REFERENCES TableName2 [TAG TagName5]Specifies the parent table to which a persistent relationship is established. Include TAG TagName5 to establish a relationship based on an existing index tag for the parent table. Index tag names can contain up to 10 characters. If you omit TAG TagName5, the relationship is established using the parent table's primary index tag.DROP FOREIGN KEY TAG TagName6 [SAVE]Deletes a foreign key whose index tag is TagName6. If you omit SAVE, the index tag is deleted from the structural index. Include SAVE to prevent the index tag from being deleted from the structural index.RENAME COLUMN FieldName4 TO FieldName5Allows you to change the name of a field in the table. FieldName4 specifies the name of the field that is renamed. FieldName5 specifies the new name of the field.Caution Exercise care when renaming table fields — index expressions, field and table validation rules, commands, functions, and so on may reference the original field names.NOVALIDATESpecifies that Visual FoxPro allows changes to be made to the structure of the table that may violate the integrity of the data in the table. By default, Visual FoxPro prevents ALTER TABLE from making changes to the structure of the table that violate the integrity of the data in the table. Include NOVALIDATE to override this default behavior.ResALTER TABLE can be used to modify the structure of a table that has not been added to a database. However, Visual FoxPro generates an error if you include the DEFAULT, FOREIGN KEY, PRIMARY KEY, REFERENCES, or SET clauses when modifying a free table.ALTER TABLE may rebuild the table by creating a new table header and appending records to the table header. For example, changing a field's type or width may cause the table to be rebuilt.After a table is rebuilt, field validation rules are executed for any fields whose type or width is changed. If you change the type or width of any field in the table, the table rule is executed.If you modify field or table validation rules for a table that has records, Visual FoxPro tests the new field or table validation rules against the existing data and issues a warning on the first occurrence of a field or table validation rule or of a trigger violation.
Alter Table 表名 Add Column 语文 类型 [选项]
Alter Table 表名 Drop Column 语文附：
SyntaxALTER TABLE TableName1
ADD | ALTER [COLUMN] FieldName1
FieldType [(nFieldWidth [, nPrecision])]
[NULL | NOT NULL]
[CHECK lExpression1 [ERROR cMessageText1]]
[DEFAULT eExpression1]
[PRIMARY KEY | UNIQUE]
[REFERENCES TableName2 [TAG TagName1]]
[NOCPTRANS]
[NOVALIDATE]
-or-
ALTER TABLE TableName1
ALTER [COLUMN] FieldName2
[NULL | NOT NULL]
[SET DEFAULT eExpression2]
[SET CHECK lExpression2 [ERROR cMessageText2]]
[DROP DEFAULT]
[DROP CHECK]
[NOVALIDATE]
-or-
ALTER TABLE TableName1
[DROP [COLUMN] FieldName3]
[SET CHECK lExpression3 [ERROR cMessageText3]]
[DROP CHECK]
[ADD PRIMARY KEY eExpression3 TAG TagName2 [FOR lExpression4]]
[DROP PRIMARY KEY]
[ADD UNIQUE eExpression4 [TAG TagName3 [FOR lExpression5]]]
[DROP UNIQUE TAG TagName4]
[ADD FOREIGN KEY [eExpression5] TAG TagName4 [FOR lExpression6]
REFERENCES TableName2 [TAG TagName5]]
[DROP FOREIGN KEY TAG TagName6 [SAVE]]
[RENAME COLUMN FieldName4 TO FieldName5]
[NOVALIDATE]ArgumentsTableName1Specifies the name of the table whose structure is modified.ADD [COLUMN] FieldName1Specifies the name of the field to add. A single table can contain up to 255 fields. If one or more fields allow null values, the limit is reduced by one to 254 fields.ALTER [COLUMN] FieldName1Specifies the name of an existing field to modify.FieldType [(nFieldWidth [, nPrecision])]Specifies the field type, field width, and field precision (number of decimal places) for a new or modified field.FieldType is a single letter indicating the field's data type. Some field data types require that you specify nFieldWidth or nPrecision or both.The following table lists the values for FieldType and indicates whether nFieldWidth and nPrecision are required:FieldType nFieldWidth nPrecision Description
C n – Character field of width n
D – – Date
T – – DateTime
N n d Numeric field of width n with d decimal places
F n d Floating numeric field of width n with d decimal places
I – – Integer
B – d Double
Y – – Currency
L – – Logical
M – – Memo
G – – General
P – – Picture
nFieldWidth and nPrecision are ignored for D, T, I, Y, L, M, G, and P types. nPrecision defaults to zero (no decimal places) if nPrecision isn't included for the N, F, or B types.NULL | NOT NULLAllows or precludes null values in the field. If one or more fields can contain null values, the maximum number of fields the table can contain is reduced by one, from 255 to 254.If you omit NULL and NOT NULL, the current setting of SET NULL determines whether null values are allowed in the field. However, if you omit NULL and NOT NULL and include the PRIMARY KEY or UNIQUE clause, the current setting of SET NULL is ignored and the field defaults to NOT NULL.CHECK lExpression1Specifies a validation rule for the field. lExpression1 must evaluate to a logical expression; it can be a user-defined function or a stored procedure. When a blank record is appended, the validation rule is checked. An error is generated if the validation rule doesn't allow for a blank field value in an appended record.ERROR cMessageText1Specifies the error message displayed when the field validation rule generates an error. The message is displayed only when data is changed within a Browse or Edit window.DEFAULT eExpression1Specifies a default value for the field. The data type of eExpression1 must be the same as the data type for the field.PRIMARY KEYCreates a primary index tag. The index tag has the same name as the field.UNIQUECreates a candidate index tag with the same name as the field. For more information about candidate indexes, see Chapter 7, Working with Tables, in the Programmer's Guide.Note Candidate indexes (created by including the UNIQUE option, provided for ANSI compatibility in ALTER TABLE or CREATE TABLE) are not the same as indexes created with the UNIQUE option in the INDEX command. An index created with UNIQUE in the INDEX command allows duplicate index keys; candidate indexes do not allow duplicate index keys.Null values and duplicate records are not permitted in a field used for a primary or candidate index.If you are creating a new field with ADD COLUMN, Microsoft Visual FoxPro will not generate an error if you create a primary or candidate index for a field that supports null values. However, Visual FoxPro will generate an error if you attempt to enter a null or duplicate value into a field used for a primary or candidate index.If you are modifying an existing field and the primary or candidate index expression consists of fields in the table, Visual FoxPro checks the fields to see if they contain null values or duplicate records. If they do, Visual FoxPro generates an error and the table is not altered.REFERENCES TableName2 TAG TagName1Specifies the parent table to which a persistent relationship is established. TAG TagName1 specifies the parent table's index tag on which the relationship is based. Index tag names can contain up to 10 characters.NOCPTRANSPrevents translation to a different code page for character and memo fields. If the table is converted to another code page, the fields for which NOCPTRANS has been specified are not translated. NOCPTRANS can only be specified for character and memo fields.The following example creates a table named MYTABLE containing two character fields and two memo fields. The second character field char2 and the second memo field memo2 include NOCPTRANS to prevent translation.CREATE TABLE mytable (char1 C(10), char2 C(10) NOCPTRANS,;
memo1 M, memo2 M NOCPTRANS)ALTER [COLUMN] FieldName2Specifies the name of an existing field to modify. Note that multiple ALTER COLUMN clauses are required to change more than one property of a field in a single ALTER TABLE command. See the ALTER TABLE examples to see how the ALTER COLUMN clauses are structured.SET DEFAULT eExpression2Specifies a new default value for an existing field. The data type of eExpression2 must be the same as the data type for the field.SET CHECK lExpression2Specifies a new validation rule for an existing field. lExpression2 must evaluate to a logical expression, and may be a user-defined function or a stored procedure.ERROR cMessageText2Specifies the error message displayed when the field validation rule generates an error. The message is displayed only when data is changed within a Browse or Edit window.DROP DEFAULTRemoves the default value for an existing field.DROP CHECKRemoves the validation rule for an existing field.DROP [COLUMN] FieldName3Specifies a field to remove from the table. Removing a field from the table also removes the field's default value setting and field validation rule.If index key or trigger expressions reference the field, the expressions become invalid when the field is removed. In this case, an error isn't generated when the field is removed, but the invalid index key or trigger expressions will generate errors at run time.SET CHECK lExpression3Specifies the table validation rule. lExpression3 must evaluate to a logical expression; it can be a user-defined function or a stored procedure.ERROR cMessageText3Specifies the error message displayed when the table validation rule generates an error. The message is displayed only when data is changed within a Browse or Edit window.DROP CHECKRemoves the table's validation rule.ADD PRIMARY KEY eExpression3 TAG TagName2 [FOR lExpression4]Adds a primary index to the table. eExpression3 specifies the primary index key expression; TagName2 specifies the name of the primary index tag. Index tag names can contain up to 10 characters. If TAG TagName2 is omitted and eExpression3 is a single field, the primary index tag has the same name as the field specified in eExpression3.Include FOR lExpression4 to specify a condition whereby only records that satisfy the filter expression lExpression4 are available for display and access; primary index keys are created in the index file for just those records matching the filter expression. Note that you should avoid using the FOR clause to create a primary index; the uniqueness of a primary key is only enforced for those records that match the condition specified with FOR lExpression4. Instead, use the INDEX command with a FOR clause to create a filtered index.Rushmore optimizes an ALTER TABLE ... FOR lExpression4 command if lExpression4 is an optimizable expression. For best performance, use an optimizable expression in the FOR clause.For more information, see SET OPTIMIZE and "Understanding Rushmore Technology" in Chapter 15, Optimizing Applications, in the Programmer's Guide.DROP PRIMARY KEYRemoves the primary index and its index tag. Because a table can have only one primary key, it isn't necessary to specify the name of the primary key. Removing the primary index also deletes any persistent relations based on the primary key.ADD UNIQUE eExpression4 [TAG TagName3 [FOR lExpression5]]Adds a candidate index to the table. eExpression4 specifies the candidate index key expression; TagName3 specifies the name of the candidate index tag. Index tag names can contain up to 10 characters. If you omit TAG TagName3, and if eExpression4 is a single field, the candidate index tag has the same name as the field specified in eExpression4.Include FOR lExpression5 to specify a condition whereby only records that satisfy the filter expression lExpression5 are available for display and access; candidate index keys are created in the index file for just those records matching the filter expression.Rushmore optimizes an ALTER TABLE ... FOR lExpression5 command if lExpression5 is an optimizable expression. For best performance, use an optimizable expression in the FOR clause.For more information, see SET OPTIMIZE and "Understanding Rushmore Technology" in Chapter 15, Optimizing Applications, in the Programmer's Guide.DROP UNIQUE TAG TagName4Removes the candidate index and its index tag. Because a table can have multiple candidate keys, you must specify the name of the candidate index tag.ADD FOREIGN KEY [eExpression5] TAG TagName4 [FOR lExpression6]Adds a foreign (non-primary) index to the table. eExpression5 specifies the foreign index key expression and TagName4 specifies the name of the foreign index tag. Index tag names can contain up to 10 characters.Include FOR lExpression6 to specify a condition whereby only records that satisfy the filter expression lExpression6 are available for display and access; foreign index keys are created in the index file for just those records matching the filter expression.Rushmore optimizes an ALTER TABLE ... FOR lExpression6 command if lExpression6 is an optimizable expression. For best performance, use an optimizable expression in the FOR clause.For more information, see SET OPTIMIZE and "Understanding Rushmore Technology" in Chapter 15, Optimizing Applications, in the Programmer's Guide.REFERENCES TableName2 [TAG TagName5]Specifies the parent table to which a persistent relationship is established. Include TAG TagName5 to establish a relationship based on an existing index tag for the parent table. Index tag names can contain up to 10 characters. If you omit TAG TagName5, the relationship is established using the parent table's primary index tag.DROP FOREIGN KEY TAG TagName6 [SAVE]Deletes a foreign key whose index tag is TagName6. If you omit SAVE, the index tag is deleted from the structural index. Include SAVE to prevent the index tag from being deleted from the structural index.RENAME COLUMN FieldName4 TO FieldName5Allows you to change the name of a field in the table. FieldName4 specifies the name of the field that is renamed. FieldName5 specifies the new name of the field.Caution Exercise care when renaming table fields — index expressions, field and table validation rules, commands, functions, and so on may reference the original field names.NOVALIDATESpecifies that Visual FoxPro allows changes to be made to the structure of the table that may violate the integrity of the data in the table. By default, Visual FoxPro prevents ALTER TABLE from making changes to the structure of the table that violate the integrity of the data in the table. Include NOVALIDATE to override this default behavior.ResALTER TABLE can be used to modify the structure of a table that has not been added to a database. However, Visual FoxPro generates an error if you include the DEFAULT, FOREIGN KEY, PRIMARY KEY, REFERENCES, or SET clauses when modifying a free table.ALTER TABLE may rebuild the table by creating a new table header and appending records to the table header. For example, changing a field's type or width may cause the table to be rebuilt.After a table is rebuilt, field validation rules are executed for any fields whose type or width is changed. If you change the type or width of any field in the table, the table rule is executed.If you modify field or table validation rules for a table that has records, Visual FoxPro tests the new field or table validation rules against the existing data and issues a warning on the first occurrence of a field or table validation rule or of a trigger violation.
解决方案 »
- ？？？房态图用什么控件好，漂亮点的？？？
- 恐怖的一次性生活!
- 从一个表里按要求查询,怎么把查询出来的结果转为XML格式的文件?谢谢
- 改变dbgrid中某一格颜色得问题
- 汇总的问题！100分！
- 用BDE建立別名,連接ACCESS數據庫出現問題?請高手指點?
- 怎样可以检测本台电脑是否已拨号上网？又怎样可以知道拨号上网后的IP？
- 求助！ado连接sql数据库
- 请问怎样修改字体大小不统一的问题
- 请问哪有《Microsoft® Agent Software Development Kit》 中文版买呀？？？
- ***ADOTABLE的“变量查询”的困惑？《=====
- 请教如何才能象Photoshop那样用delphi生成一条完整的颜色带
begin
Query1.Close;
Query1.SQL.Clear;
Query1.DatabaseName:='DBDEMOS';//将DBDEMOS改成你的数据库名,即sql_db1
Query1.SQL.Add('select * from Customer.db');//将Customer.db改成你的表名
//studeng_table
Query1.Open;
end;
//还有你的表里面的数据库字段名最好用英文！
这算什么东东，抄个HELP过来。to nne998:
其实SQL语言是有一定标准的，无论什么编程语言，基本的SQL是不会改变的，一里通，则百里明。
SELECT * FROM studeng_table WHERE 学号=10
怎么查询出来的是空的呢？