下面为什么会出错？
function GetDiskSerial(DiskChar: Char): string;varSerialNum : pdword;
a, b : dword;
Buffer : array [0..255] of char;
begin
result := "";
if GetVolumeInformation(PChar(diskchar+":\"), Buffer, SizeOf(Buffer), SerialNum,
a, b, nil, 0) then
Result := IntToStr(SerialNum^);end;
function GetDiskSerial(DiskChar: Char): string;varSerialNum : pdword;
a, b : dword;
Buffer : array [0..255] of char;
begin
result := "";
if GetVolumeInformation(PChar(diskchar+":\"), Buffer, SizeOf(Buffer), SerialNum,
a, b, nil, 0) then
Result := IntToStr(SerialNum^);end;
Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
Dialogs, StdCtrls;type
TSrbIoControl = packed record
HeaderLength: ULONG;
Signature: array[0..7] of Char;
Timeout: ULONG;
ControlCode: ULONG;
ReturnCode: ULONG;
Length: ULONG;
end;
SRB_IO_CONTROL = TSrbIoControl;
PSrbIoControl = ^TSrbIoControl; TIDERegs = packed record
bFeaturesReg: Byte; // Used for specifying SMART "commands".
bSectorCountReg: Byte; // IDE sector count register
bSectorNumberReg: Byte; // IDE sector number register
bCylLowReg: Byte; // IDE low order cylinder value
bCylHighReg: Byte; // IDE high order cylinder value
bDriveHeadReg: Byte; // IDE drive/head register
bCommandReg: Byte; // Actual IDE command.
bReserved: Byte; // reserved. Must be zero.
end;
IDEREGS = TIDERegs;
PIDERegs = ^TIDERegs; TSendCmdInParams = packed record
cBufferSize: DWORD;
irDriveRegs: TIDERegs;
bDriveNumber: Byte;
bReserved: array[0..2] of Byte;
dwReserved: array[0..3] of DWORD;
bBuffer: array[0..0] of Byte;
end;
SENDCMDINPARAMS = TSendCmdInParams;
PSendCmdInParams = ^TSendCmdInParams; TIdSector = packed record
wGenConfig: Word;
wNumCyls: Word;
wReserved: Word;
wNumHeads: Word;
wBytesPerTrack: Word;
wBytesPerSector: Word;
wSectorsPerTrack: Word;
wVendorUnique: array[0..2] of Word;
sSerialNumber: array[0..19] of Char;
wBufferType: Word;
wBufferSize: Word;
wECCSize: Word;
sFirmwareRev: array[0..7] of Char;
sModelNumber: array[0..39] of Char;
wMoreVendorUnique: Word;
wDoubleWordIO: Word;
wCapabilities: Word;
wReserved1: Word;
wPIOTiming: Word;
wDMATiming: Word;
wBS: Word;
wNumCurrentCyls: Word;
wNumCurrentHeads: Word;
wNumCurrentSectorsPerTrack: Word;
ulCurrentSectorCapacity: ULONG;
wMultSectorStuff: Word;
ulTotalAddressableSectors: ULONG;
wSingleWordDMA: Word;
wMultiWordDMA: Word;
bReserved: array[0..127] of Byte;
end;
PIdSector = ^TIdSector;const
IDE_ID_FUNCTION = $EC;
IDENTIFY_BUFFER_SIZE = 512;
DFP_RECEIVE_DRIVE_DATA = $0007C088;
IOCTL_SCSI_MINIPORT = $0004D008;
IOCTL_SCSI_MINIPORT_IDENTIFY = $001B0501;
DataSize = sizeof(TSendCmdInParams) - 1 + IDENTIFY_BUFFER_SIZE;
BufferSize = SizeOf(SRB_IO_CONTROL) + DataSize;
W9xBufferSize = IDENTIFY_BUFFER_SIZE + 16;type
TForm_Main = class(TForm)
Edit_HardDiskNumber: TEdit;
Label1: TLabel;
Button_Get: TButton;
procedure Button_GetClick(Sender: TObject);
private
{ Private declarations }
public
{ Public declarations }
end;var
Form_Main: TForm_Main;implementation{$R *.dfm}function GetIdeDiskSerialNumber: string;
type
TSrbIoControl = packed record
HeaderLength: ULONG;
Signature: array[0..7] of Char;
Timeout: ULONG;
ControlCode: ULONG;
ReturnCode: ULONG;
Length: ULONG;
end;
SRB_IO_CONTROL = TSrbIoControl;
PSrbIoControl = ^TSrbIoControl; TIDERegs = packed record
bFeaturesReg: Byte; // Used for specifying SMART "commands".
bSectorCountReg: Byte; // IDE sector count register
bSectorNumberReg: Byte; // IDE sector number register
bCylLowReg: Byte; // IDE low order cylinder value
bCylHighReg: Byte; // IDE high order cylinder value
bDriveHeadReg: Byte; // IDE drive/head register
bCommandReg: Byte; // Actual IDE command.
bReserved: Byte; // reserved for future use. Must be zero.
end;
IDEREGS = TIDERegs;
PIDERegs = ^TIDERegs; TSendCmdInParams = packed record
cBufferSize: DWORD; // Buffer size in bytes
irDriveRegs: TIDERegs; // Structure with drive register values.
bDriveNumber: Byte; // Physical drive number to send command to (0,1,2,3).
bReserved: array[0..2] of Byte; // Reserved for future expansion.
dwReserved: array[0..3] of DWORD; // For future use.
bBuffer: array[0..0] of Byte; // Input buffer.
end;
SENDCMDINPARAMS = TSendCmdInParams;
PSendCmdInParams = ^TSendCmdInParams; TIdSector = packed record
wGenConfig: Word;
wNumCyls: Word;
wReserved: Word;
wNumHeads: Word;
wBytesPerTrack: Word;
wBytesPerSector: Word;
wSectorsPerTrack: Word;
wVendorUnique: array[0..2] of Word;
sSerialNumber: array[0..19] of Char;
wBufferType: Word;
wBufferSize: Word;
wECCSize: Word;
sFirmwareRev: array[0..7] of Char;
sModelNumber: array[0..39] of Char;
wMoreVendorUnique: Word;
wDoubleWordIO: Word;
wCapabilities: Word;
wReserved1: Word;
wPIOTiming: Word;
wDMATiming: Word;
wBS: Word;
wNumCurrentCyls: Word;
wNumCurrentHeads: Word;
wNumCurrentSectorsPerTrack: Word;
ulCurrentSectorCapacity: ULONG;
wMultSectorStuff: Word;
ulTotalAddressableSectors: ULONG;
wSingleWordDMA: Word;
wMultiWordDMA: Word;
bReserved: array[0..127] of Byte;
end;
PIdSector = ^TIdSector;const
IDE_ID_FUNCTION = $EC;
IDENTIFY_BUFFER_SIZE = 512;
DFP_RECEIVE_DRIVE_DATA = $0007C088;
IOCTL_SCSI_MINIPORT = $0004D008;
IOCTL_SCSI_MINIPORT_IDENTIFY = $001B0501;
DataSize = sizeof(TSendCmdInParams) - 1 + IDENTIFY_BUFFER_SIZE;
BufferSize = SizeOf(SRB_IO_CONTROL) + DataSize;
W9xBufferSize = IDENTIFY_BUFFER_SIZE + 16;
var
hDevice: THandle;
cbBytesReturned: DWORD;
pInData: PSendCmdInParams;
pOutData: Pointer; // PSendCmdInParams;
Buffer: array[0..BufferSize - 1] of Byte;
srbControl: TSrbIoControl absolute Buffer;
var ptr: PChar;
i: Integer;
c: Char;
begin
ptr := @Data;
for i := 0 to (Size shr 1) - 1 do
begin
c := ptr^;
ptr^ := (ptr + 1)^;
(ptr + 1)^ := c;
Inc(ptr, 2);
end;
end;
begin
Result := '';
FillChar(Buffer, BufferSize, #0);
if Win32Platform = VER_PLATFORM_WIN32_NT then
begin // Windows NT, Windows 2000
// Get SCSI port handle
hDevice := CreateFile('\\.\Scsi0:', GENERIC_READ or GENERIC_WRITE,
FILE_SHARE_READ or FILE_SHARE_WRITE, nil, OPEN_EXISTING, 0, 0);
if hDevice = INVALID_HANDLE_VALUE then Exit;
try
srbControl.HeaderLength := SizeOf(SRB_IO_CONTROL);
System.Move('SCSIDISK', srbControl.Signature, 8);
srbControl.Timeout := 2;
srbControl.Length := DataSize;
srbControl.ControlCode := IOCTL_SCSI_MINIPORT_IDENTIFY;
pInData := PSendCmdInParams(PChar(@Buffer) + SizeOf(SRB_IO_CONTROL));
pOutData := pInData;
with pInData^ do
begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do
begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl(hDevice, IOCTL_SCSI_MINIPORT, @Buffer, BufferSize, @Buffer, BufferSize, cbBytesReturned, nil) then Exit;
finally
CloseHandle(hDevice);
end;
end
else
begin // Windows 95 OSR2, Windows 98
hDevice := CreateFile('\\.\SMARTVSD', 0, 0, nil, CREATE_NEW, 0, 0);
if hDevice = INVALID_HANDLE_VALUE then Exit;
try
pInData := PSendCmdInParams(@Buffer);
pOutData := PChar(@pInData^.bBuffer);
with pInData^ do
begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do
begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl(hDevice, DFP_RECEIVE_DRIVE_DATA, pInData, SizeOf(TSendCmdInParams) - 1, pOutData, W9xBufferSize, cbBytesReturned, nil) then Exit;
finally
CloseHandle(hDevice);
end;
end;
with PIdSector(PChar(pOutData) + 16)^ do
begin
ChangeByteOrder(sSerialNumber, SizeOf(sSerialNumber));
SetString(Result, sSerialNumber, SizeOf(sSerialNumber));
end;
end;procedure TForm_Main.Button_GetClick(Sender: TObject);
begin
Edit_HardDiskNumber.Text := GetIdeDiskSerialNumber;
end;end.
begin
if GetVolumeInformation('c:\', Buffer, SizeOf(Buffer), SerialNum, a, b, nil, 0) then Label1.Caption := IntToStr(SerialNum^);
end;
var
VolumeSerialNumber : DWORD;
MaximumComponentLength : DWORD;
FileSystemFlags : DWORD;
begin
result := '';
try
GetVolumeInformation(PChar(DriveID + ':\'),
nil, 0, @VolumeSerialNumber,
MaximumComponentLength, FileSystemFlags,
nil, 0);
result := IntToHex(HiWord(VolumeSerialNumber), 4) +
'-' + IntToHex(LoWord(VolumeSerialNumber), 4);
exceptend;
end;